• Bulletin of the Korean Chemical Society
• /
• v.17 no.7
• /
• pp.625-630
• /
• 1996

The cobalt-substituted polyoxotungstate [(CoPW11O39)5-] has been used as a catalyst in olefin epoxidation and alkane hydroxylation reactions. The epoxidation of olefins by iodosylbenzene in CH3CN yielded epoxides predominantly with trace amounts of allylic oxidation products. cis-Stilbene was streoselectively oxidized to cis-stilbene oxide with small amounts of trans-stilbene oxide and benzaldehyde formation. The epoxidation of carbamazepine (CBZ) by potassium monopersulfate in aqueous solution gave the corresponding CBZ 10,11-oxide product. Other transition metal-substituted polyoxotungstates (M=Mn2+, Fe2+, Ni2+, and Cu2+) were inactive in the CBZ epoxidation reaction. The cobalt-substituted polyoxotungstate also catalyzed the oxidation of alkanes with m-chloroperbenzoic acid to give the corresponding alcohols and ketones. The presence of CH2Br2 in the hydroxylation of cyclohexane afforded the formation of bromocyclohexane, suggesting the participation of cyclohexyl radical. In the 18O-labeled water experiment, there was no incorporation of 18O into the cyclohexanol product when the hydroxylation of cyclohexane by MCPBA was carried out in the presence of H218O. Some mechanistic aspects are discussed as well.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.1
• /
• pp.75-79
• /
• 2004

Organic coatings are widely used to control of the corrosion of a steel structure. The water in coatings may cause the coatings to swell, leading to the degradation of the coatings. In addition, water affects the permeation of oxygen and other corrosive agents, and consequently, the presence of such substances at coating-metal interface promotes corrosion of the metal substrate. In this study, the anticorrosive properties of 4 types of coating, such as epoxy-epoxy, epoxy-urethane, urethane-epoxy, urethane-urethane, were evaluated. The evaluation tests were conducted under cyclic water-absorption/desorption conditions, consisting of alternative exposure to diluted 0.001M-LiCl(a$H_2O$≒1) and concentrated 10M-LiCl(a$H_2O$≒0.15). The anticorrosive performance of coatings was found to decrease in the order of urethane-urethane > urethane-epoxy > epoxy-epoxy coating.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.2
• /
• pp.109-115
• /
• 2007

Solar energy conversion to hydrogen was carried out via a two-step thermochemical water splitting using metal oxide redox pair. To simulate the solar radiation, a 7 kW short arc Xe-lamp was used. Partially reduced iron oxide and cerium oxide have the water splitting ability, respectively. So, $Fe_3O_4$ supported on $CeO_2$ was selected as the active material. $Fe_3O_4/CeO_2$(20 wt/80 wt%) was prepared by impregnation method, then the active material was washcoated on the ceramic honeycomb monolith made of mullite and cordierite. Oxygen was released at the reduction step($1673{\sim}1823\;K$) and hydrogen was produced from water at lower temperature($873{\sim}1273\;K$). The result demonstrate the possibility of the 2-step thermochemical water splitting hydrogen production by the active material washcoated monolith. And hydrogen and oxygen was produced separately without any separation process in a monolith installed reactor. But the SEM and EDX analysis results revealed that the support used in this experiment is not suitable due to the thermal instability and coating material migration.

• Journal of Animal Environmental Science
• /
• v.7 no.3
• /
• pp.191-195
• /
• 2001

This research was carried out to investigate the effect of ozone treatment to improve the livestock drinking water quality. Ozone concentration treated was 18.5~36.5ppm in each system. PH and dissolved oxygen(DO) concentration in drinking water was increased by ozone and ozone+anion treatment. But there was no difference in UV used for drinking water treatment. Oxidation and deduction Potential(ORP) was increased while ozone was treated. Colony Forming Unit(CFU) of E. coli 0.8:$H^-$, Salmonella typhimurium, Staphylococcus aureus was decreased after 30 minute to 1 hour ozone and UV treatment.

• Journal of Power System Engineering
• /
• v.18 no.3
• /
• pp.93-99
• /
• 2014

The purpose of this paper is to manufacture the non-sintered ceramic used lime and industrial waste. The used materials were basalt powder sludge, calcium hydroxide(Ca(OH)2) and additives such as calcium stearate and $TiO_2$. The mixing ratios between Ca(OH)2 and sludge were 5:5, 6:4 and 8:2, respectively. The ceramic forms were pressured by 100, 200 and 300 bar and cured in 14% CO2 for 12 days. The behaviors of compressive strength, specific gravity, water absorption and pH of ceramic form were investigated. The results were compressive strength of over 36 MPa, water absorption of over 8.8%, pH value of over 12.3. And these results satisfied GR F 4006 and 4031 standard.

• Journal of the Korean Ceramic Society
• /
• v.50 no.1
• /
• pp.18-24
• /
• 2013

This study was conducted to recycle fly ash containing an abundance of CaO generated from combustion in a circulating layer as a carbon storage medium. The study utilized XRD, TG-DTA and XRF analyses during the hydration of fly ash and identified calcium substances within fly ash that could be used in a carbonation process. $Ca^{2+}$ ions in the calcium substances were easily converted to hydrates. A carbonation experiment was done, which used the method of $CO_2$ gas injection to produce suspensions by mixing fly ash with distilled water. The results were analyzed using TG-DTA, XRD, and pH meter measurements. The study was able to verify that the reaction was completed at a $CO_2$ flow rate of 300cc/min approximately 30 minutes after an injection into a solution with a solid-liquid ratio of 1 : 10 of fly ash and distilled water. Moreover, the stirring time of the suspensions did not influence the reaction, and the reaction time was found to diminish as the portion of the fly ash became smaller. Thus, this study produced carbon storage fly ash having a $CO_2$ storage rate of about 71% through the utilization of the CaO content contained within fly ash.

• Journal of the korean society of oceanography
• /
• v.33 no.1-2
• /
• pp.1-7
• /
• 1998

In the western Weddell Sea, winter mixed layer is characterized by near-freezing temperature and higher salinity due to brine injection through sea-ice formation. This layer becomes Winter Water being capped by warmer and less saline Antarctic Surface Water during the sea-ice melt-ing season. In this study, Winter Water was preliminarily identified by the oxygen isotopic com-positions. The ${\delta}^{18}$O values of Winter Water show the progressively increasing trend from south to north in the study area. It presumably reflects the enhanced mixing with Antarctic Surface Water due to the extent of influence by low S'"0 value of sea-ice/glacier meltwater. Correlations between salinity and 6'"0 values of seawater can be used to more generally characterize Winter Water with a view to identification. However, the prediction on the degree of mixing from these relationships needs more detailed isotope data, although this study allows the oxygen isotopic composition of seawater as a tracer to identify the water mass.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.123-128
• /
• 1998

Dihydroxyacetone (DHA) has been used as a self tanning agent and many emulsion formulations containing DHA have been studied. In an emulsion, many factors which have negative effect on DHP and the resultant DHA decomposition can destabilize the emulsion base. In this study, two kinds of emulsion with 5％ DHA were prepared, O/W type emulsion and Multilamellavesicle (MLV) type emulsion to compare the stabilization effects of both emulsions on the DHA. The OHA concentration was analyzed quantitatively by high performance liquid Chromatography (HPLC), also the pH and viscosity of both emulsions were measured for stability. This process was carried out over 4 months. For HPLC, a bondaclone $C_{18}$ column with a mobile phase of distilled water and UV detector were used. The results of these experiment showed that DHA is more stable in an MLV emulsion than it is in an O/W type emulsion.

• Journal of ILASS-Korea
• /
• v.3 no.4
• /
• pp.8-15
• /
• 1998

The spray characteristics of emulsified fuel of W/O type has been experimentally investigated. The mixture of light oil and water by using ultrasonic energy adding system is used as the emulsified fuel. The SMD of sprayed droplet of emulsified fuel is measured by using the particle size analyzer. Major parameters of the present experimental study are the volume fraction of water in emulsified fuel, $0\sim30%$ by 5%, injection pressure, $10kg_f/cm^2\sim18kg_f/cm^2$ by $2kg_f/cm^2$, and the measurement distance, $10\sim100mm$, between injection nozzle tip and analyzer beam. Compared with light oil, the SMD of emulsified fuel is larger gradually by increasing the volume fraction of water in emulsified fuel, heightening injection pressure and increasing the spray distance. Also, In considering the fact that the pattern of drop size distribution of emulsified fuel is alike that of light oil, the real time spray in coincidence with making emulsified fuel by adding ultrasonic energy can stabilize spray pattern without modificating the injection system used by now.

• Food Science and Biotechnology
• /
• v.18 no.3
• /
• pp.604-609
• /
• 2009

The antioxidative activities of the water solution of crude extract from edible mushroom enokitake Flammulina velutipes were compared with those of ascorbic acid and ascorbic acid 6-palmitate in oil-in-water (O/W) emulsions of cod liver oil. Oxidation of the emulsions was carried out at 40 and $50^{\circ}C$ in the dark. The antioxidant activities were measured by in vitro assay against oxygen uptake, 2-thiobarbituric acid value, hydroperoxide formation of the oils. Also, residual docosahexaenoic acid content was measured as indices of lipid oxidation. The cod liver oil in O/W emulsions with added enokitake crude extract (ECE) was significantly more stable against lipid oxidation than the control emulsions without the extract in terms of any oxidation indices used. Moreover, ECE provided remarkable antioxidative properties to eicosapentaenoic acid ethyl ester in emulsion system. These observations demonstrate that F. velutipes can be used as a natural antioxidant, which effectively prevents oxidation of polyunsaturated oils in emulsion system.