• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.635-638
• /
• 2000

The feasibility study on the application of formed urethane to slope stabilization and backfill material was carried out through laboratory and field test. The physical and chemical properties of formed urethane were investigated. The slope stabilization effect of urethane was examined in the field occurred slope failure. The formed urethane and sprayed urethane admixed with seed was applied to protect the slope failure in this study.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.69-70
• /
• 2017

In Korea, silicone type sealant is widely used for construction site. Before the silicone type, urethane type is one of the main type sealants. However, the weathering property is less than the silicone type, the urethane type is replace by the silicone one. Still the urethane type is used for the inside of the buildings for the perimeter of the window. The silicone type sealants are better in weathering property than those of the urethane type sealants. Except the weathering property urethane type sealant has its own advantage like movement property, low cost and so forth. There are many research results for the outdoor weathering of the sealants, but in Korea there are no results for the outdoor weathering for construction sealants. This research is focused on the outdoor weathering of the urethane sealants, how to measure the degradation, and compare the products which used in Korea. The outdoor weathering test is usually time consuming, thus we designed specialized device for accelerating the result.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.130-135
• /
• 2010

Paint is used as top coat in Automobile Refinishing that is divided into 1K paint of base type and 2K paint of urethane type. after using 1K paint, it can be reusable. However 2K paint is not available that is mixed a certain amount of base with hardner, so 2K paint has to be used all at a time or discarded the rest. This study covered that colored Urethane paint and colorless urethane paint in top coating process of AR. Top coat urethane paint is divided into colored urethane paint and transparent urethane paint like clear coat. Colored urethane paint is used for paint that contains resin, pigment, solvent and additives. It is color such as black and white. While transparent urethane paint is used for paint that contains resin, solvent and additives. Urethane paint has a paint system that cur after several hours of mixing base and hardner. By a paint technician of a field and empirical data, we can also recognize that according to worker's paint style and experience, although he or she paint same car model and area, paint use of one's is different. There aren't guidelines workers refer to about paint use by car models and work scope because ARP works various car models that are in different color, size and area. After using urethane paint, the rest of paint has come, and there are highs and lows in paint use each time he or she works. Therefore, this study suggest a basic guideline to use paint efficiently and regularly by understanding area, the type of work, and paint use that are appropriate for each car model and regardless of workers and work scopes in AR.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.1
• /
• pp.75-79
• /
• 2004

Organic coatings are widely used to control of the corrosion of a steel structure. The water in coatings may cause the coatings to swell, leading to the degradation of the coatings. In addition, water affects the permeation of oxygen and other corrosive agents, and consequently, the presence of such substances at coating-metal interface promotes corrosion of the metal substrate. In this study, the anticorrosive properties of 4 types of coating, such as epoxy-epoxy, epoxy-urethane, urethane-epoxy, urethane-urethane, were evaluated. The evaluation tests were conducted under cyclic water-absorption/desorption conditions, consisting of alternative exposure to diluted 0.001M-LiCl(a$H_2O$≒1) and concentrated 10M-LiCl(a$H_2O$≒0.15). The anticorrosive performance of coatings was found to decrease in the order of urethane-urethane > urethane-epoxy > epoxy-epoxy coating.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.262-268
• /
• 2003

Organic coatings are widely used to control the corrosion of steel structure. The water in coatings may cause swelling or solvation of coatings, leading to the degradation of coatings. In addition, water affects the permeation of oxygen and other corrosive agents, and consequently the presence of such substances at coating-metal interface promotes corrosion of metal substrate. In this study, the anticorrosive properties of 4 types of coating, such as epoxy-epoxy, epoxy-urethane, urethane-epoxy, urethane-urethane, were evaluated. The evaluation tests were carried out under cyclic water-absorption/desorption conditions, consisting of alternative exposure to diluted 0.001M-LiCl($a_{1120}{\fallingdotseq}1$) and concentrated l0M-LiCl($a_{1120}{\fallingdotseq}0.05$). The anticorrosive performances of coatings were found to decrease in the order of urethane-urethane> urethane-epoxy> epoxy-epoxy coating.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.247-251
• /
• 2019

Two different urethane acrylates (mono-acrylate and di-acrylate) were used to prepare unsaturated polyester-based hybrid gel-coats. The physical properties and surface characteristics of these gel-coats were investigated on the basis of the content and type of urethane acrylate. The set-to-touch time increased and the physical properties (surface hardness and tensile strength) decreased with an increase in the urethane acrylate content. However, the type of urethane acrylate did not affect these parameters. It was found that the optimal urethane acrylate content for the application of unsaturated polyester-based hybrid gel-coats is ~10 wt%.

• Journal of Adhesion and Interface
• /
• v.8 no.1
• /
• pp.8-14
• /
• 2007

Poly(urethane-methyl methacrylate) hybrid emulsions can be controlled with their thermal, mechanical and anti-chemical properties as plastic coating materials. In this study, water dispersed poly(urethane-methyl methacrylate) hybrid emulsions were prepared by prepolymer synthesis and soap free emulsion polymerization. For imparting hydrophilicity on polyurethane prepolymer, 2,2-bis (hydroxymethyl) propionic acid was added to the polyurethane prepolymer with methyl methacrylate monomer and was neutralizated by triethylamine (TEA). After neutralization, the prepolymer mixture was dispersed in the water phase with stable droplets. The synthesis was carried out with chain extension from the ethylene diamine and initiation of methyl methacrylate by soap free emulsion polymerization. Stable poly(urethane-methyl methacrylate) hybrid emulsion was successfully obtained with different synthetic conditions and acrylic monomer contents. Poly(urethane-methyl methacrylate) hybrid emulsion were characterized and compared with tensile strength, viscosity, and adhesion properties.

• Corrosion Science and Technology
• /
• v.10 no.3
• /
• pp.95-100
• /
• 2011

Protective coatings play an important role in the protection of metallic structures against corrosive environment. The main function of anticorrosive coating is to prevent the materials from corrosive agents, such as water, oxygen and ions. In the study, the corrosion protection properties of urethane and epoxy coating systems were evaluated using EIS methods exposed to the corrosion acceleration test such as Norsok M501, Prohesion and hygrothermal cyclic test. AFM analysis of the coating systems was carried out to monitor the change of roughness of coatings. Urethane coating system was more stable than the epoxy coating under given cyclic conditions. Water uptake into the urethane coatings was less than that into the epoxy coating. The urethane coating system showed better corrosion protection than epoxy coating system based on the changes of the impedance modulus at low frequency region with exposure time. Consequently, the corrosion protection properties of the epoxy and urethane coatings was well correspond with their surface roughness changes and water uptakes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.255-256
• /
• 2018

In this study, to confirm the performance of gel type urethane (hereinafter referred to as urethane gel) developed for the purpose of securing waterproof stability after application by increasing compatibility with asphalt mastic film material, general urethane coating material and adhesion. As a result, gel type urethane showed "all right" in fatigue resistance test.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.6
• /
• pp.23-35
• /
• 2004

The goal of study was to investigate the influence of the acrylated urethane oligomer on mechanical properties, the chemical resistance and thermal resistance of the UV curable urethane acrylate coatings for fancy veneer overlayed plywood flooring. The pencil hardness and abrasion resistance of the coated fancy veneer overlayed plywood floorings increased with increasing the acrylate functionality of the acrylated urethane oligomer. In the case of the UV cured film containing hexa-functional acrylated aliphatic urethane oligomer, high discoloration of the coated fancy veneer overlayed plywood flooring was observed near the cracks at the beginning of the chemical treatment. In this study, it was found that the degradation of the UV cured film caused by an alkaline reagent was higher than that of the UV cured film caused by an acidic treatment.