• Applied Microscopy
• /
• v.20 no.1
• /
• pp.51-64
• /
• 1990

This experiment was performed to study the morphological changes of the goblet cells in the rabbit duodenal mucosa after common bile duct ligation. Healthy adult rabbits weighting about 2kg body weight were divided to normal and bile duct ligated groups. Common bile duct ligation was performed under ether anesthesia. Experimental animals were sacrificed on the 1st, 3rd, 5th, 7th and 14th day after the operation. Mucosal specimens from the upper part of duodenum were fixed in 2.5% glutaraldehyde-1.5% paraformaldehyde, followed by 1% osmium tetroxide, embedded in araldite mixture, cut with LKB-V ultratome, stained with uranyl acetate - lead citrate, and observed with JEM 100 CX II electron microscope. Observed results were as follow : 1. In the early stages(1st-5th day) of the experiments, the goblet cells showed apocrine and merocrine secretion. But those of the late stage(7th and 14th day) groups showed exocytotic merocrine secretion. 2. In the late stage of the experiments, there found than increase of newly formed goblet cells that contain electron lucent cytoplasms. 3. In the goblet cells of normal rabbit, mucous granules with higher or lower electron densities are found together in the cytoplasm, and electron lucent mucous granules occasionally fused together. But in the early stage of the common bile duct ligation, goblet cells contained granules of higher electron densities. 4. Considering the above findings, common bile duct ligation probably initiates the hypersecretion of mucous granules of goblet cells in the early stage, and may facilitate the differentiation of goblet cells in the later stage.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.1
• /
• pp.11-21
• /
• 2006

The adjustable dental impression trays were made for being adjusted their width automatically along the width of patient's dental arch. The purpose of this study was to investigate the retentive force of adjustable dental impression trays made of different synthetic resin materials. Three pairs of adjustable trays were made of ABS(acrylonitrile butadiene styrene) synthetic resin, polyurethane synthetic resin and polycarbonate synthetic resin with a hole and without a rim on the border area of them. The experiment was done with the horse-shoe shaped metal plate to pull out the set impression body from the tray jig which was made for holding the tray on the lower part of Universal Testing Machine(UTM, Zwick Z020, Zwick Co., Germany). After the alginate impression in the tray was allowed to set four minutes, a tensile force was applied at right angles to the tray which had been previously seated on the jig. The force was applied to measure a maximum force by use of UTM at a constant strain rate 100mm per minute. The results obtained in this study were as follows : 1. The upper trays were showed higher retentive force than lower trays in three tray materials. 2. There was no significant difference in the retentive force of the tray materials(p>0.05).

• Korean Journal of Applied Biomechanics
• /
• v.32 no.2
• /
• pp.43-48
• /
• 2022

Objective: The purpose of this study was to verify the effectiveness among simulating ski jumping trainings by comparing with actual ski jump. Method: Three healthy youth national athletes were recruited for this study (age: 13.70 ± 0.9 yrs, height: 169.30 ± 0.9 cm, jumping caree: 5.3 ± 0.9 yrs). Participants were asked to performed ski jumping with 3 simulating and one actual situation. A 3-dimensional motion analysis with 5 channels of EMG was performed in this study. Muscle activations of Rectus Femoris [RF], Tibialis Anterior [TA], Thoracis [TH], Gluteus maximus [GM], and Gastronemius [GL] were achieved with sampling rate of 2,000 Hz during each jump. Results: In the case of S1 in the actual jumping motion, the deviation of the muscle activity peak did not appear each trial, and the jump timing was consistent. For S2, the timing of the muscles peak activation which can maintain the posture of the upper body and ankles appeared at the beginning. In the case of S3, the part maintaining the ankle posture at the beginning appeared, but it could be expected that it would progress in the vertical direction due to the activation of GL at the time of jumping. Conclusion: The muscle activation peak before the take-off point showed a different pattern for each athlete, and individual differences were large. In addition, it was attempted to confirm the actual jump with simulation jump, and it was found that not only the difference in patterns but also the fluctuations in the timing of each muscle activation peak were large.

• Journal of architectural history
• /
• v.18 no.1
• /
• pp.7-29
• /
• 2009

In understranding the essence of the Korea traditional Architecture, it is important to consider the jointing methods of architectural members, architectural technologies, etc. Especially the purpose of this study is understanding on the Jointing Method of Wooden Members in the period of Unified Silla Architecture. It's conclusion is summarized as follows. 1. A section of column has very close to do with the foundation stone. The structures of foundation stone and column are generally concluded by butt joint, arrow-head joint, housed joint by Grang-e method. Judu is structured by arrow-head joint And, in general, beam is structured by Sagaematchum Chumcha and sagaljudu of Don direction. At the head of Pyungju and the body of Goju, Changbang is structed by Jangbumachum with arrow-head joint or by jumukchang-machum. Also, it is surmised that Gyisoseum and Anssolim methods had been applied to columns from former ages. The example can be found at Bagjae Mireuksaji stone pagoda. Bagjae Mireuksaji stone pagoda taking wooden-pagoda form adopts Gyisoseum and Anssolim methods. We can also find such a sort of methods from other stone constructions like Budo, etc. 2. Injahwaban is structured by short Changbumachum with arrowed-head joint at upper members, and by Anjangmachum at the lower part. This sort of Gongpo style can be seen in the mural painting of tomb of Koguryo and in Buplyungsa, Buplyunsa, Bupkisa-located in Japan, which are influenced by Bakjae or Unified Silla. It is considered that at the end of the late United Silla, Injawhaban had been replaced with Chumcha and Soro on the Pyungbang under influence of Dapo style from China.

• Journal of architectural history
• /
• v.25 no.5
• /
• pp.75-86
• /
• 2016

This paper examines the pagodas during the Bagan period, which are thought to be most valuable among those in Myanmar. They have not been sufficiently studied, in spite of their high Buddhist status. It considers the contemplation of Pato, their formal characteristics in the Bagan period and the formal categorizations of pagodas in the same period. Thus, following seven kinds of conclusions are derived: first, researchers provide opinions to the Pato which should be regarded as the Buddhist shrine-type of pagoda with a unique Bagan form, symbolically indicating that Theravada Buddhism incorporated Hinduism; second, the terraces were characteristic components in pagodas, during the Bagan period, which were built after the enthronement of King Anawratha and are thought to symbolically express the wish to widely spread Theravada Buddhism; third, Shwesandaw Zedi seems to affect not only Shwezigon Zedi, a representative standard form of pagoda in Myanmar, but also Ananda Pato; fourth, it is thought to be proper to examine the terraces by classifying them into lower, central(from pedestals to Angryeon and Bokryeon) and upper part, if it intends to divide a pagoda with bell-shaped body on the terraces during the Bagan period, into three parts; fifth, the Pato may be identified as a form of pagoda during the Bagan period, and such a form can be classified as that of Sikhara on the rectangular terrace; sixth, forms of Myanmar's pagodas can be classified into fourteen kinds of them, and they may be also grouped into transmitted, general and special type; and seventh, on the basis of the findings, it is thought that the pagodas during the Bagan period may be classified into six forms, and they can be largely categorized into transmitted, general and special type.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.509-520
• /
• 2020

Currently, the criteria for input motions used in dam seismic design are clearly presented in general provisions of seismic design (KDS 17 10 00), and seismic ground motion records should be matched to the standard design response spectrum. However, the effect on the results is not assessed according to the selection of the seismic ground motion records, making it difficult to select seismic input motions. Therefore, in this study, the change in the amount of crest settlement of an embankment dam was assessed through numerical analysis after matching the seismic ground motion records of domestic and overseas earthquakes in accordance with the standard design response spectrum provided in the seismic design code (KDS 17 10 00). The results showed that the behavior of the upper part of the embankment, such as maximum acceleration at the crest and amplification through the dam, rather than the effect of free-field acceleration, had a greater effect on the amount of crest settlement. Moreover, it was confirmed that even an input seismic motion matched to the standard design response spectrum can make a difference in settlement depending on the characteristics of amplification through a dam body.

• Safety and Health at Work
• /
• v.3 no.2
• /
• pp.146-153
• /
• 2012

Objectives: The introduction of computerized numeric control (CNC) technology in manufacturing industries has revolutionized the production process, but there are some health and safety problems associated with these machines. The present study aimed to investigate the extent of postural discomfort in CNC machine operators, and the relationship of this discomfort to the display and control panel height, with a view to validate the anthropometric recommendation for the location of the display and control panel in CNC machines. Methods: The postural discomforts associated with CNC machines were studied in 122 male operators using Corlett and Bishop's body part discomfort mapping, subject information, and discomfort level at various time intervals from starting to end of a shift. This information was collected using a questionnaire. Statistical analysis was carried out using ANOVA. Results: Neck discomfort due to the positioning of the machine displays, and shoulder and arm discomfort due to the positioning of controls were identified as common health issues in the operators of these machines. The study revealed that 45.9% of machine operators reported discomfort in the lower back, 41.8% in the neck, 22.1% in the upper-back, 53.3% in the shoulder and arm, and 21.3% of the operators reported discomfort in the leg. Conclusion: Discomfort increased with the progress of the day and was highest at the end of a shift; subject age had no effect on patient tendency to experience discomfort levels.

• Clinical Endoscopy
• /
• v.51 no.6
• /
• pp.558-562
• /
• 2018

Background/Aims: While the occurrence of multiple whitish flat elevated lesions (MWFL) was first reported in 2007, no studies on MWFL have been published to date. The present retrospective observational study aimed to clarify the endoscopic findings and clinicopathological features of MWFL. Methods: Subjects were consecutive patients who underwent upper gastrointestinal endoscopy as part of routine screening between April 2014 and March 2015. The conventional white-light, non-magnifying and magnifying narrow-band images were reviewed. Clinical features were compared between patients with and without MWFL. Results: The conventional endoscopic findings of MWFL include multiple whitish, flat, and slightly elevated lesions of various sizes, mainly located in the gastric body and fundus. Narrow-band imaging enhanced the contrast of MWFL and background mucosa, and magnifying narrow-band imaging depicted a uniformly long, narrow, and elliptical marginal crypt epithelium with an unclear microvascular pattern. Histopathological findings revealed hyperplastic changes of the foveolar epithelium, and parietal cell protrusions and oxyntic gland dilatations were observed in the fundic glands, without any intestinal metaplasia. The rate of acid-reducing drug use was significantly higher in patients with MWFL than in those without (100% [13/13] vs. 53.7% [88/164], p<0.001). Conclusions: The present study indicated a relationship between the presence and endoscopic features of MWFL and history of acid-reducing drug use.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.6
• /
• pp.665-680
• /
• 1997

The specific absorption rate (SAR) distributions in various models of the human head have been analyzed when the models are exposed to 350 MHz and 900 MHz plane waves. The numerical analysis is performed with the finite-difference time-domain (FDTD) method. A homogeneous sphere including a cylinderical neck, a homogeneous head shaped model, and a heterogeneous realistic model are used as models of human head. The incident plane wave used for these calculations is propagating from the front to the back or from the back to the front of the head model, with its E-field vector orientation being parallel to the major length of the body. The specific findings are: 1) the average SARs of the three models are similar mutually but the local SARs of them differ greatly mutually; 2) the power is deposed more deeply in the head at 350 MHz, which is roughly the resonant frequency of a human head, than at 900 MHz; 3) for a plane wave propagating from the back, "hot spot" is found in the neck region, not in the head; 4) for a plane wave propagating from the front, "hot spot" is found in the nose at 900 MHz, and in the upper part of the lip and the jaw region at 350 MHz.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.1
• /
• pp.51-59
• /
• 2008

The following conclusions were obtained from the studies on Bangpuntongseongsan both from the documents and Hyungsang medicine. Bangpungtongseong-san was created by Yu Wan-so to relieve both interior and exterior of disease from the pathogenic fire, and it cures wind syndrome and dry syndrome. Bangpungtongseong-san is of light herbal combination and it works in the upper part of the body and is mainly applied to skin disease. Perspiration without harming the exterior and purgation without hurting the interior shows that it is not a severe prescription belonging to meditation therapy. It is mostly used for curing the disease of internal heat caused by over drinking and consuming heavy food, and it has special relationship with Yangmyung meridian. It is mentioned in the chapters of spirit, head, face, eye, ear, nose, throat, skin, hair, prescription, wind, dryness, fire, internal damage, epidemic infectious disease, carbuncle and cellulitis, ulceration, and pediatrics of ${\ulcorner}$Donguibogam${\lrcorner}$. It is usually applied to those who belong to Yangmyung type of the six meridian types or wind type, who has excessive heat, people with red complexion, reddened nose, pimples over the face and nose, coarse heel, loss of hair due to wind-heat, and to those who tend to have dandruff. Through examination over the cases treated with Hyungsan medicine, Bangpungtongseong-san was found efficacious in bloodshot eyes, brandy nose, loss of hair, various skin problems, tetanus, acute alcoholism, paralysis of hand and foot, deafness, and tinnitus.