Browse > Article

Retentive Force of Adjustable Dental Impression Trays with Different Synthetic Resin Materials  

Lee, In-Seob (Department of Prosthodontics, School of Dentistry, Wonkwang University)
Lee, jin-Han (Department of Prosthodontics, School of Dentistry, Wonkwang University)
Kim, Yu-Lee (Department of Prosthodontics, School of Dentistry, Wonkwang University)
Dong, Jin-Keun (Department of Prosthodontics, School of Dentistry, Wonkwang University)
Publication Information
Journal of Dental Rehabilitation and Applied Science / v.22, no.1, 2006 , pp. 11-21 More about this Journal
Abstract
The adjustable dental impression trays were made for being adjusted their width automatically along the width of patient's dental arch. The purpose of this study was to investigate the retentive force of adjustable dental impression trays made of different synthetic resin materials. Three pairs of adjustable trays were made of ABS(acrylonitrile butadiene styrene) synthetic resin, polyurethane synthetic resin and polycarbonate synthetic resin with a hole and without a rim on the border area of them. The experiment was done with the horse-shoe shaped metal plate to pull out the set impression body from the tray jig which was made for holding the tray on the lower part of Universal Testing Machine(UTM, Zwick Z020, Zwick Co., Germany). After the alginate impression in the tray was allowed to set four minutes, a tensile force was applied at right angles to the tray which had been previously seated on the jig. The force was applied to measure a maximum force by use of UTM at a constant strain rate 100mm per minute. The results obtained in this study were as follows : 1. The upper trays were showed higher retentive force than lower trays in three tray materials. 2. There was no significant difference in the retentive force of the tray materials(p>0.05).
Keywords
Citations & Related Records
연도 인용수 순위
  • Reference
1 zarb GA, Bolender CL, Hickey JG ,Carlsson GE, Boucher'S Prosthetic Treatment for Edentulous Patients. 10th ed. St Louis : CV Mosby 150-151, 1990
2 송대성, 진태호, 동진근. 한국인 성인에 대한 기성트레이의 적합도에 관한 연구. 대한치과보철학회지 1989;27(2):131-140
3 Jordan LG. Alginate Impression Materials. J Am Dent Assoc 1945;32:985-986   DOI
4 Atkinson HF, Gill HI, and Shepherd RW. Some notes on alginate impression material. Austrailian Dent J 1958;3:184-185   DOI
5 Morrow RW, Brown Jr CE, Powell JM, Rudd KD. Compatibility of alginate impression materials and dental stones. J Prosthet Dent 1971;25(5):556-566   DOI   ScienceOn
6 Milward PJ, Murphy WM. Custom impression trays with a new hypoallergenic material. J Prosthet Dent 1994;72(5):572-573   DOI   ScienceOn
7 Mitchell JV, Damele JJ. Influence of tray design upon elastic impression materials. J Prosthet Dent. 1970 ;23:51-7   DOI   ScienceOn
8 Reisbick MH, Matyas J. The accuracy of highly filled elastomeric impression materials. J Prothet Dent 1975;33:67-72   DOI
9 Goldfogel M, Harvey WL, Winter D.Dimensional change of acrylic resin tray materials. J Prosthet Dent. 1985 ;54:284-6   DOI   ScienceOn
10 Fusayama T, Nakazato M. The design of stock trays and the retention of irreversible hydrocolloid impressions. J Prosthet Dent 1969;21:136-142   DOI   ScienceOn
11 Johnson GH, Craig RG. Accuracy of addition silicones as a function of technique. J Prosthet Dent. 1986;55: 197-203   DOI   ScienceOn
12 최민호, 김민정, 오상천, 동진근, 유지형태에 따른 치과 인상용 트레이의 유지력에 관한 연구. 대한치과턱관절기능교합학회지 2004;20(1):43-50
13 Eames WB, Sieweke JC, Wallace SW, Rogers LB. Elastomeric impression materials: effect of bulk on accuracy. J Prosthet Dent. 1979 ;41:304-7   DOI   ScienceOn
14 Dong JK, Oh SC, Kim MJ. Development of adjustable dental impression trays. 10th Meeting of the International College of Prosthodontists. Halifax, Canada 2003 ; abstract No.51
15 김경남. 알지네이트 인상재. 대한 치과 기재학회지 1986;13:27-32
16 동서문화사. 파스칼 세계대백과사전. 2005
17 Collard EW, Caputo AA, Standlee JP, Trabert KC. Dynamic stresses encountered in impression removal. J Prosthet Dent. 1973;29: 498-506   DOI   ScienceOn
18 Stackhouse Jr JA. The accuracy of stone dies made from rubber impression materials. J Prosthet 1970;24:377-386   DOI   ScienceOn
19 Shigeto N, Murata H, Hamada T. Evaluation of the methods for dislodging the impression tray affecting the dimensional accuracy of the abutments in a complete dental arch cast. J Prosthet Dent. 1989;61:54-8   DOI   ScienceOn
20 Mendez AJ, The influence of impression trays on the accuracy of stone casts poured from irreversible hydrocolloid impressions. J Prosthet Dent 1985;54:383-388   DOI   ScienceOn
21 Wilson HJ, Smith DC. The bonding of alginate impression materials to impression trays. Brit Dent J 1963;115:291-294
22 Shigeto N , Murata H , Hamada T. Evaluation of the methods for dislodging the impression tray affecting the dimensional accuracy of the abutments in a complete dental arch cast. J Prosthet 1989;61:54-58   DOI   ScienceOn
23 SCHNELL RJ, PHILLIPS RW. Dimensional stability of rubber base impressions and certain other factors affecting accuracy. J Am Dent Assoc. 1958;57:39-48   DOI
24 Pagniano RP, Scheid RC, Clowson RL, Dagefoerde RO, Zardiackas LD. Linear dimensional change of acrylic resins used in the fabrication of custom trays. J Prosthet Dent. 1982 ;47:279-8   DOI   ScienceOn
25 Woodward JD, Morris JC, Khan Z. Accuracy of stone casts produced by perforated trays and nonperforated trays. J Prosthet Dent. 1985 ;53:347-50   DOI   ScienceOn
26 Eames WE, Sieweke JC, Wallace SW, Rogers LB. Elastomeric impression materials: effect of bulk on accuracy. J Prosthet Dent. 1979;41:304-7   DOI   ScienceOn
27 Linke BA, Nicholls JI, Faucher RR. Distortion analysis of stone casts made from impression materials. J Prostet Dent 1985;54:794-802   DOI   ScienceOn
28 송기범, 김성록, 박광수, 김유리, 동진근. 유지형태에 따른 가변형 치과 인상용트레이의 유지력에 관한 연구. 대한치과보철학회지. 2005 :43:15-28
29 Phillips RW, Schnell RJ. Diensional stability of rubber base impressions and certain other factors affecting accuracy. J Am Dent Assoc 1958;57:39-48   DOI
30 Ciesco JN, Malone WF, Sandrik JL, Mazur B. Comparison of elastomeric impression materials used in fixed prosthodontics. J Prosthet Dent. 1981:45:89-94   DOI   ScienceOn
31 송대성, 강석구, 조혜원, 동진근. 한국형 유치악용 기성 트레이의 개발에 관한 연구. 대한치과보철학회지 1996;34(4);755-779
32 신수정, 박정용, 오상천, 동진근. 한국형 유치악용 기성 트레이의 적합도에 관한 연구. Journal of Wonkwang Dental Research Institute 1997;7(1):193-209
33 이선형. 고무 인상재의 정확도에 관한 연구. 대한치과의사협회지 1983; 21:237-243
34 de Araujo PA, Jorgensen KD. Effect of material bulk and undercuts on the accuracy of impression materials. J Prosthet Dent. 1985;54: 791-4   DOI   ScienceOn
35 Walters RA, Spurrier S. An effect of tray design and material retention on the linear dimensional changes in polysulfide impressions. J Prosthet Dent. 1990 ;63:277-81   DOI   ScienceOn
36 Myers GE, Stockman DG, Factors that affect the accuracy and dimensional stability of the mercaptan rubber-base impression materials. J Prosthet Dent 1960; 10:525-535   DOI
37 Kaloyannides TM, Orristidou L. Elasticity of impression materials:IV Permanent deformation as a function of time. J Dent Res 1975;54:168-173   DOI   ScienceOn
38 Ansari IH. Making a custom tray for elastomiric impression materials without a primary cast. J Prosthet Dent 1994;72(5):569-571   DOI   ScienceOn
39 Bomberg TJ, Hatch RA, Hoffman W Jr. Impression material thickness in stock and custom trays. J Prosthet Dent. 1985;54: 170-2   DOI   ScienceOn
40 Fusayama T, Nakazato M. The design of stock trays and the retention of irreversible hydrocolloid impressions. J Prosthet Dent 1969;21:136-142   DOI   ScienceOn
41 Breeding LC, Dixon DL, Moseley JP. Custom impression trays: part l-Mechanical properties. J Prostet Dent 1994;71 :31-34   DOI   ScienceOn