• 한국화재소방학회논문지
• /
• 제22권3호
• /
• pp.228-233
• /
• 2008

폭굉한계는 가연성물질의 화재 및 폭발 위험성을 결정하기 위해 사용되는 중요한 연소 특성치 가운데 하나이다. 본 연구에서는 가연성혼합물의 구성하는 각 순수성분의 연소열과 기상 조성을 이용하여 폭발한계를 예측하였다. 제시된 방법론에 의한 계산값은 적은 오차범위에서 문헌값과 일치하였다. 따라서 본 연구에서 제시한 방법론이 다른 가연성물질의 폭굉한계 예측에 폭넓게 적용되기를 기대한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.481-485
• /
• 2000

A new type of compliant press-fit pin has been developed and evaluated for use packaging of electronic telecommunications equipments. Main requirements for design are defined the upper limit of pin insertion force and the lower limit of pin retention force. Upper limit of pin insertion force is set to protect the copper plate of the inner PTH wall. Lower limit of pin retention force is set to satisfy a wire-wrapping specification. Results are represented by insertion force and retention force variations according to the front angle, rear angle and material, etc.

• 대한수학회보
• /
• 제50권1호
• /
• pp.175-184
• /
• 2013

In this paper, the reverse Bonnesen style inequalities for convex domain in the Euclidean plane $\mathbb{R}^2$ are investigated. The Minkowski mixed convex set of two convex sets K and L is studied and some new geometric inequalities are obtained. From these inequalities obtained, some isoperimetric deficit upper limits, that is, the reverse Bonnesen style inequalities for convex domain K are obtained. These isoperimetric deficit upper limits obtained are more fundamental than the known results of Bottema ([5]) and Pleijel ([22]).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.261-268
• /
• 2000

In this study the bearing capacity of the eccentrically loaded shallow footing is estimated by means of the upper bound method of limit analysis. In the case of applying the upper bound, the results depend on the failure mechanism. So the failure surface is correctly studied through the model test using sand. New method is proposed to estimate the bearing capacity of the eccentrically loaded shallow footing by means of the upper bound method to apply the failure mechanism based on the model test. The propriety of new method is verified by the results of various methods. And the influences of the variables eccentricity, embedment depth, variations of contact width factor by model test using sand are also studied in this paper

• 기술사
• /
• 제40권5호
• /
• pp.73-78
• /
• 2007

The apartment sale in lots price upper limit system was propelled from this month for stabilization of the residential policy that will lower the apartment sale in lots price. the private constructive industry presents how make activated the apartment enterprise, presents what kind of problems it has and points the complementary problems when the government enforcing it.

• Computers and Concrete
• /
• 제19권3호
• /
• pp.243-256
• /
• 2017

Epoxy-coated reinforcing bars are widely used to protect the corrosion of the reinforcing bars in the RC elements under their in-service environments and external loads. In most field surveys, it was reported that the corrosion resistance of the epoxy-coated reinforcing bars is typically better than the uncoated bars. However, from the experimental tests conducted in the labs, it was reported that, under the same loads, the RC elements with epoxy-coated reinforcing bars had wider cracks than the elements reinforced with the ordinary bars. Although this conclusion may be true considering the bond reduction of the reinforcing bar due to the epoxy coating, the maximum service loads used in the experimental research may be a main reason. To answer these two phenomena, service performance of 15 RC beam specimens with uncoated and epoxy-coated reinforcements under different fatigue loads was experimentally studied. Influences of different coating thicknesses of the reinforcing bars, the fatigue load range and load upper limit as well as fatigue load cycles on the mechanical performance of RC test specimens are discussed. It is concluded that, for the test specimens subjected to the comparatively lower load range and load upper limit, adverse effect on the service performance of test specimens with thicker epoxy-coated reinforcing bars is negligible. With the increments of the coating thickness and the in-service loading level, i.e., fatigue load range, load upper limit and fatigue cycles, the adverse factor resulting from the thicker coating becomes noticeable.

• 한국화재소방학회논문지
• /
• 제31권6호
• /
• pp.83-90
• /
• 2017

전선에 정격이상의 과전류가 흐르게 되면 온도가 상승하고 전선피복이 열화되어 단락현상이 발생한다. 과전류의 크기에 따라 전선의 온도 상한치는 변화하며, 각각의 온도 상한치에서 단락이 발생할 때, 단락온도와 전선표면온도간 온도차로 인해 응고과정에서 냉각속도 차이가 발생한다. 이때 용융단면에 형성되는 수지상 조직의 패턴특징이 상이하게 된다. 본 논문에서는 과전류 크기에 따라 변화하는 전선온도의 상한치를 측정하고, 이때 단락을 발생시켜 수지상의 2차 가지 간격(Dendrite Arm Spacing : DAS)을 분석하여 수치를 정량화 하였다. 실험결과, 과전류 크기가 커짐에 따라 전선온도의 상한치는 증가하였으며, 전선온도가 높아질수록 2차 가지 간격이 증가하는 것을 확인하였다.

• 한국환경과학회지
• /
• 제31권1호
• /
• pp.61-76
• /
• 2022

In this study, surface particulate matter (PM_2.5) concentrations were calculated based on empirical equations using measurements of ceilometer backscatter intensities and meteorological variables taken over 19 months. To quantify the importance of meteorological conditions on the calculations of surface PM_2.5 concentrations, eight different meteorological conditions were considered. For each meteorological condition, the optimal upper limit height for an integration of ceilometer backscatter intensity and coefficients for the empirical equations were determined using cross-validation processes with and without considering meteorological variables. The results showed that the optimal upper limit heights and coefficients depended heavily on the meteorological conditions, which, in turn, exhibited extensive impacts on the estimated surface PM_2.5 concentrations. A comparison with the measurements of surface PM_2.5 concentrations showed that the calculated surface PM_2.5 concentrations exhibited better results (i.e., higher correlation coefficient and lower root mean square error) when considering meteorological variables for all eight meteorological conditions. Furthermore, applying optimal upper limit heights for different weather conditions revealed better results compared with a constant upper limit height (e.g., 150 m) that was used in previous studies. The impacts of vertical distributions of ceilometer backscatter intensities on the calculations of surface PM_2.5 concentrations were also examined.

• 한국지반공학회논문집
• /
• 제38권8호
• /
• pp.75-84
• /
• 2022

현재 인장형 지반앵커는 그 사용목적, 사용기간에 따라 가설과 영구로 구분하여 성능평가를 별도로 제시하고 있다. 현재의 성능평가 상한선과 하한선 기준을 실무에 적용하는 데 있어 타당한 것으로 보인다. 하지만, 압축형 지반앵커는 주로 영구로 사용되어 온 점으로 인해 가설과 영구의 구분 없이 영구에 해당하는 기준이 제시되어 있어 제거형과 같이 가설로 사용하는 지반앵커에 있어서는 엄격한 기준이 되고 있다. 기존 성능평가 기준선을 고찰해 본 결과, 하한 기준선은 가설과 영구 구분 없이 적용할 수 있는 것으로 판단되나 상한 기준선은 가설과 영구를 구분하여 제시하는 것이 바람직한 것으로 판단된다. 압축형 지반앵커에서 상한선 기준의 적용에 있어서 앵커의 정착지반상태(암반 또는 토사), 사용기간, 특히 하중-변위 곡선의 탄성상태 유지 여부 등을 고려하여 상한선을 조정할 필요성이 있다.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.42-48
• /
• 2016

The usage of the correct combustion properties of the treated substance for the safety of the process is critical. For the safe handling of n-nonane being used in various ways in the chemical industry, the flash point and the autoignition temperature(AIT) of n-nonane was experimented. And, the explosion limit of n-nonane was calculated by using the flash point obtained in the experiment. The flash points of n-nonane by using the Setaflash and Pensky-Martens closed-cup testers measured $31^{\circ}C$ and $34^{\circ}C$, respectively. The flash points of n-nonane by using the Tag and Cleveland open cup testers are measured $37^{\circ}C$ and $42^{\circ}C$. The AIT of n-nonane by ASTM 659E tester was measured as $210^{\circ}C$. The lower explosion limit by the measured flash point $31^{\circ}C$ was calculated as 0.87 vol%. And the upper explosion limit by the measured upper flash point $53^{\circ}C$ was calculated as 2.78 vol%. It was possible to predict lower explosion limit by using the experimental flash point or flash point in the literature.