• 대한치과교정학회지
• /
• 제49권4호
• /
• pp.222-234
• /
• 2019

Objective: To investigate the three-dimensional lip vermilion changes after extraction and non-extraction orthodontic treatment in female adult patients and explore the correlation between lip vermilion changes and incisor changes. Methods: Forty-seven young female adult patients were enrolled in this study (skeletal Class III patients were excluded), including 34 lip-protruding patients treated by extraction of four first premolars (18 patients requiring mini-implants for maximum anchorage control and 16 patients without mini-implants) and 13 patients requiring non-extraction treatment. Nine angles, seven distances, and the surface area of the lip vermilion were measured by using pre- and post-treatment three-dimensional facial scans. Linear and angular measurements of incisors were performed on lateral cephalograms. Results: There were no significant changes in the vermilion measurements in the non-extraction group. The vermilion angle, vermilion height, central bow angle, height/width ratio, and vermilion surface area decreased significantly after the orthodontic treatment in the extraction groups, but the upper/lower vermilion proportion remained unchanged. Significant correlations were found between the changes in incisor position and those in vermilion angles, vermilion height, and surface area. Conclusions: Extraction of the four first premolars probably produced an aesthetic improvement in lip vermilion morphology. However, the upper/lower vermilion proportion remained unchanged. The variations in the vermilion were closely related to incisor changes, especially the upper incisor inclination changes.

• 한국산업융합학회 논문집
• /
• 제5권3호
• /
• pp.261-268
• /
• 2002

In this paper, the shape optimization is considered over the upper slab of reinforced concrete culvert. The sequential linear programming method (SLP) is used as a rational approach to this shape optimization. To make a comparison between the arch shaped member and the straight member for the upper slab, the culverts with 5~20m earth height were adopted. It is shown that the optimum rise/span is about 7%-13%, and the arch shaped member is more cheap (over 10%) than the straight member for the construction cost.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.581-582
• /
• 2009

Continuous deep girders which transmit the gravity load from the upper wall to lower columns have frequently long end shear spans between the boundary of the upper wall and the face of the lower column. This paper presents the results of tests and analyses performed on three 1:2.5 scale specimens with long end shear spans, (the ratios of shear-span/height : 2.0

• 대한치과교정학회지
• /
• 제8권1호
• /
• pp.39-48
• /
• 1978

The growth changes in craniofacial depth and height from seven to eleven years of age have been studied in thirty two Korean children, consisted of seventeen boys and fifteen girls. The data was obtained from lateral cephalometric radiographs analyzed by the Coben's coordinate system, and the main conclusions might be summarized as follows. 1. Among the craniofacial depth increments the lower facial depth dimension increased the most, mid-facial depth dimension increased loss, and cranial depth dimension increased the least. 2. In spite of the increasing depth dimensions, the mid-facial depth proportion had a tendency to remain stable. 3. The degree of overbite increased markedly from seven to eleven years of age. 4. Increment in the total anterior facial height dimension was larger than that in the total posterior facial height, and the upper anterior facial height increased more than the lower anterior facial height. 5. The lower facial depth proportion increased markedly, and the convexity of the face was reduced significantly. 6. The posterior facial height tended to show small proportional changes. 7. The growth increments in craniofacial complex were larger in the facial height than in the facial depth.

• 대한치과교정학회지
• /
• 제14권1호
• /
• pp.39-45
• /
• 1984

10years and 8 months old patient, who had been wearing Milwaukee brace for 5 months, was treated by multibanded system without extract on. She complianed severe protrusion and interdental spacing of upper anterior teeth. Cephalometric analysis revealed short anterior facial height, infraclusion of the lower first molars and severe profrusion of upper and lower anterior teeth. During orthodontic treatment Milwaukee brace was replaced by TLSO, so the orthopedic force on the dentofacial region was eliminated. After 2 years and 3 months, she gained raised bite, increased interincisal angle, salient reduction in the protrusion of upper central incisals with agreeable overjet, complete obliteration of interdental spacing and reduction of protrusion of upper and lower lips.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.187-194
• /
• 2010

Shape optimization of an upper plenum of PBMR type gas cooled nuclear reactor has been performed by using three-dimensional Reynolds-Averaged Navier-Stokes (RANS) analysis and surrogate modeling technique. The objective function is defined as a linear combination of uniformity of flow distribution in the core and pressure drop in the upper plenum and the core. The ratio of thickness of slot to diameter of rising channels, ratio of height of upper plenum to diameter of rising channels, and ratio of eight of the slot at inlet to outlet, are used as design variables for optimization. Design points are selected through Latin-hypercube sampling. The optimal point is determined through surrogate-based optimization method which uses 3-D RANS analyses at design points. The results show that the optimum shape represent remarkably improved performance in flow uniformity and friction loss than the reference shape.

• 치과방사선
• /
• 제6권1호
• /
• pp.7-14
• /
• 1976

This study was done using the 45° oblique lateral old, 18 males and 27 females, with normal occlusion, premolars and molars on upper and lower jaws. Axial inclination to nasal floor, occlusal plane and inter-axial inclination were examined. In addition the position of each tooth was examined in height and depth in upper and lower jaws. The results were obtained as follows; 1. The inclination of long axis of upper 1st premolar was most nearly perpendicular, upper canine was tilted mesially, and 2nd premolar and molars were tilted distally. 2. The inclination of long axis of lowers molar were tilted mesially. 3. There were no severe variation on the inter-axial inclination of canine to mandibular plane, and 2nd molar.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.170-177
• /
• 1999

The natural period calculation equations specified in the current building code are empirical formulas that depend on height and material type of the structure. Building with the upper wall and lower frame type is a unique structure which composed of two different structural system This type of structure needs either the deep transfer girder or the thick transfer plate that brings the sudden change of stiffness and mass. Therefore the natural period equations recommended by the current code can not be applied directly. In this study the natural period of building with typical plan obtained by dynamci analysis is compared with that of various codes. Ad approximate estimation equation for the natural period of building with the upper wall and lower frame type obtained by regression analysis is recommended. by the current code can not be applied directly. In this study the natural period of building with typical plan obtained by dynamic analysis is compared with that of various codes, And approximate estimation equation for the natural period of building with the upper wall and lower frame type obtained by regression analysis is recommended.

• The Korean Journal of Ecology
• /
• 제22권2호
• /
• pp.65-68
• /
• 1999

In December-January of 1996-1997 and 1997-1998, information was gathered about vertical distribution of foraging sites of tits in 34 flocks in coniferous and deciduous forests. There was a significant effect of forest type on the distribution of foraging sites of each species. Habitat was classified into 5 height layers vertically: ground, bushes (usually＜1.5 m, up to 3 m), tree layer 1 (up to 1/3 of tree height), tree layer 2 (1/3-2/3 tree height). and tree layer 3 (＞2/3 tree height). There were differences among species: great tit (Parus major) foraged mostly on the ground, coal tit (P. ater) and long-tailed tit (Acrocephalus caudatus) - on the highest tree layer, marsh tit (P. palustris) was often seen on bushes, and varied tit (P. varius) - in tree layer 2. Smaller species used upper and outer parts of trees. suggesting that, like in most other similar studies. larger dominant species prevented smaller species from using inner parts of trees.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.511-516
• /
• 2004

The objective of this study is to optimally design FRP-concrete members of a bridge structure. Using the GENESIS7.0 that is a commercial optimization program we performed an optimal design with design parameters that consist of height, width of FRP member, height of concrete. And we practiced an optimal design with the design variables, thickness of upper flange, bottom flange, and web. The results of these studies are summarized as follows : (1) Thickness of composite-concrete is proper at over loon (2) FRP member reaches the optimal section when the width of the FRP member is 20cm its height is 10cm and the height of the composite-concrete is 12cm.