• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.213-223
• /
• 1999

In this paper, input-output transmission characteristics of the Eclipse, which is a parallel machine tool capable of 5 face rapid machining, are investigated. By splitting the weighted Jacobian matrix into two parts, the force and moment transmission characteristics together with the velocity and angular velocity transmission characteristics are analyzed. A new manipulability measure, which combines the volume of the manipulability ellipsoid and the condition number of the splitted Jcobian matrix, is proposed. Two link parameters, the ratio of upper and lower platforms' radii and the length of a supporting link of the Eclipse, are designed by applying the new manipulability measure derived. Computer simulations are provided.

• Journal of the Korean Society of Costume
• /
• v.51 no.7
• /
• pp.147-165
• /
• 2001

The objective of this study was to develop the Jeogori Pattern for 9 to 10 year-old boys To determine the measurement items for the Jeogori Pattern making, applied factor analysis, correlation analysis and regression analysis to the 37 measurement items of the 9 to 10 year-old boys classified as a standard somatotype. To understand the shape and variation of the body surface, analyzed the replica of the upper body surface that was obtained by the method of using surgical tape. Be based on the results of the above studies, designed the Jeogori Pattern. The designed pattern was evaluated by the sensory test. The drafting methods of Jeogori Pattern obtained are as follows. $\circled1$ The measurement items are Bust Girth, Center Back Waist Length, Neck Width, and Hwajang Length. $\circled2$ Jeogori Length Center Back Waist Length$\times$4/3 $\circled3$ Front Body Girth(1/2) : B/2 + 1.5cm Back Body Girth(1/2) : B/2 + 3.5cm $\circled4$ Jin-Dong : B/4 + 3cm $\circled5$ Back Godae Width(1/2) : Neck Width/2 + 1.7cm Front Godae Width(l/2) : Back Godae Width(1/2) - 2cm $\circled6$Back Godae Point is 1.5cm higher than shoulder line, and Front Godae Point is 1.5cm lower than shoulder line. $\circled7$ Back Godae Depth: 1.2cm + 1.5cm = 2.7cm The Jeogori Pattern designed by the above method Is as (fig. 8) The results of the sensory test of the new pattern are as fellows. Except for 2 items, every mark of 24 test items has over 5.0 point and a total average mark is 5.25 point. Witch is a good mark. Therefore the new pattern is valid. Especially, the parts of Git, sleeves and back face have a high mark, so the appearances of those parts are excellent.

• Tunnel and Underground Space
• /
• v.11 no.1
• /
• pp.30-35
• /
• 2001

Focusing on the bench length, this paper presents the results of 3-dimensional elafto-plastic FE Analysis un tunnels of full face, mini-bench and short bench excavated in weathered rock. Influences of unsupported span, horizontal to vertical stress ratio, thickness of shotcrete on the behavior of rock and support were a1so studied. Results showed that displacements of mini-bench tunnels responded more sensitively to bench lengths than those of short bench. The effects of bench excavation on upper half displacement increased with longer unsupported span. Horizontal to vertical stress ratio showed a greater influence on displacement and preceding displacement ratio or sidewall rather than those of crown and invert.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.155-160
• /
• 2005

The aim of this study is to establish anatomical dimension of the lip in young population in Korean, using specially designed soft ware with photographic image. We measure 13 anatomical dimensions of lips in 2,229 young people. (917 male, 1312 female, Aged from 18-33 years. Average age 19.7). Statistical analysis of these measurements of large population could offer useful information in facial plastic surgery. The mean measurements are as follows 1. Lengths (male/female) Widths of philtrum: $1.11{\pm}0.19cm/1.02{\pm}0.21cm$ Heights of philtrum: $1.6{\pm}0.24cm/1.47{\pm}0.21cm$ Heights of cupid bow: $0.88{\pm}0.16cm/0.83{\pm}0.16cm$ Height of upper vermilion: $0.74{\pm}0.16cm/0.70{\pm}0.15cm$ Height of lower vermilion: $1.08{\pm}0.17cm/1.02{\pm}0.15cm$ Height of upper lip(Rt.): $1.24{\pm}0.2cm/1.23{\pm}0.2cm$ Height of upper lip(Lt.): $1.24{\pm}0.2cm/1.17{\pm}0.19cm$ Half horizontal length of lip: $2.2{\pm}0.26cm/2.11{\pm}0.2cm$ Horizontal length of lip: $4.41{\pm}0.4cm/4.25{\pm}0.36cm$ Height of lower face: $7.1{\pm}0.58cm/6.52{\pm}0.6cm$ 2. Angles Nasolabial angle: $97.77{\pm}11.97^{\circ}/95.5{\pm}11.34^{\circ}$ Mentolabial angle: $133.88{\pm}14.65^{\circ}/129.27{\pm}13.67^{\circ}$ Angle of Cupid's bow: $111.65{\pm}13.99^{\circ}/116.75{\pm}16.2^{\circ}$ Previous reported photogrammetric measurements was difficult to implement to surgical practice. Because these were printed photographies of the same size. Therefore, in this study, we can measure a lot of objects and items more conveniently and correctly by using proportional program on computer after taking a digital photograph. Consequently, proportional measurements with photogrammetry of lip could be useful and corrective substitute for anthropometrical measuring. These data could be useful reference for preoperative consultation, surgical planning and learning anatomical measurement of lips and adjacent structures.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.1
• /
• pp.53-60
• /
• 2009

Maxillary deficiency, anterior cross bite, constriction of maxillary arch, malaligned teeth are frequently observed in patients with cleft lip and palate. Surgery and orthodontics, combined intervention are needed to correct maxillary deficiency. Distraction osteogenesis that currently used has many advantages like less relapse tendency, more advancement of maxilla, capable in growing patients. In case 1, 18 years old girl with BCLP had severe midfacial deficiency and multiple missing of teeth. LeFort I osteotomy, followed by maxillary distraction osteogenesis utilizing rigid external distraction device(RED) system, was performed. After a 6-day latency period, distraction proceeded at a rate of 1mm per day (at 1st week, 1.5mm/day). Total advancement was 19mm. The RED device left in place for the additional 4 weeks for consolidation. After the RED device was removed, face mask was applied with elastic traction for 5 weeks. After achieving acceptable facial appearance and occlusion, orthodontic appliance was removed. The results after 4 years follow-up was sustained pretty well without aggravation of velopharyngeal function. In case 2, 22 years old man with UCLP had severe midfacial deficiency and palatally erupted upper 2nd premolars due to arch length discrepancy, but the anterior segment of maxillary did not show constriction and crowding. patient had no arch width discrepancy, crowding was concentrated on premolar region. Segmental LeFort I osteotomy was performed. After a 6 - day latency period, using internal distraction device, distraction proceeded at a 0.5mm per day(at 1st week, 0.75 - 1 mm/day). Total advancement was 15mm. After internal distraction device was removed, face mask was applied with elastic traction for 4 weeks. After surgical-orthodontic treatment, facial appearance and occlusion was improved pretty good, and after 46 months follow-up the result was retained well.

• Journal of Korean Academy of Nursing
• /
• v.23 no.2
• /
• pp.157-169
• /
• 1993

The most effective modality for cold application and the length of the application have not been determined despite many studies about the use of cold. A quasi-experimental study was conducted to examine the most effective modality among three methods of cold application, the most effective length of time for the application and the continuing effect after each type of cold application. Thirty adult patients admitted to medical and neurosurgical unit and with high fever (above 38.2 ℃) were assigned randomly to each of three cold ap-plication methods : (a) ice bag: (b) cold compress; and (c) tepid water sponge bath. Each method was applied to the whole anterior surface except the face and neck with the patient in the supine pos-ition. Rectal temperatures and skin temperatures (mid chest, upper arm, thigh and leg) were measured be-fore each application and every 10 minutes during ,each application for a period of 60 minutes. They were also measured every 10 minutes for 30 minutes after each cold application was finished. The experiments were carried out from Dec. 22. 1992 through Feb. 26, 1993. The data were analysed using means, ANCOVA Sheffe test and Pearson's Correlation Coefficient. The results of this study are as follows : 1. There were no significant differences among the three cold application methods in the reduction of body temperature, 2. Among the ice bag, cold compress and tepid water sponge bath groups, the ice bag proved to be the most effective method for lowering skin temperature while the cold compress was least effective. 3. Both rectal and skin temperature continued to decrease during the 60 minutes of cold application, but the hunting phenomena was not observed at any of the cold application sites. 4. There were no significant correlations between mean rectal and skin temperatures. 5. Skin temperatures according to the cold application sites decreased to a range of 3.46℃ to 5.20℃ (mid chest), a range of 4.48℃ 4.96℃ (upper arm), a range of 3.86℃ to 5.05℃ (thigh), and a range of 5.42℃ -7.12℃ (leg ). 6. In continuing effect after the cold applications were finished, rectal temperatures according to ice bag, cold compress and tepid sponge bath decreased to 0.29℃, 0.23℃ and 0.09℃ respectively, while the mean skin temperatures increased to 2.39℃ , 2.04℃ and 2.22℃ respectively. In this experiment the ice bag was the most effective modality for lowering skin temperature. when-ever cold is applied for systemic effect, the continuing effect of cold should be considered. The determination of the most effective length of time for cold application needs further study.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.2
• /
• pp.259-271
• /
• 1992

This study was designed to investigate the criteria of the perfect smile that was necessary to improve the esthetic problem in oral and maxillo-facial region and treating the anterior tooth region. The author took the facial straight photograph of 240 university students(male : 129, female : 111) in a resting and a smiling position, measured and analized the lip pattern and the relation between the lip and the teeth when they were smiling. Besides, 10 members of committee for appraisal (dentist : 5 persons, professor of the college of fine arts : 5 persons) estimated the smiling pattern. After that the author have compared and analyzed the obtained results. The results obtained were as follows : 1. In the shape of the upper lip, when the upper lip curved downward, it was 42.92% , straight was 45.00% and curved upward was 12.08%. The group in which the upper lip curved upward was the most esthetic. 2. In the relation between the upper lip and the teeth, high smile was 29.17%, average smile was 55.83% and low smile was 15.00%. The group of average smile was the most esthetic. 3. In the parallel relation between the lower lip and maxillary anterior incisal curvature, the group of paralled was 60.42%, the group of straight was 34.17% and the group of reverse was 5.41%. The group of parallel was the most esthetic. 4. In the relationship between maxillary anterior incisor and lower lip, the group of the maxillary anterior incisor were slightly covered by the lower lip was 10.42%, the group of the maxillary anterior teeth touched to the lower lip was 35.83%, and the no-touching was 53.75%. The group of the maxillary anterior teeth touched to the lower lip was the most esthetic. 5. In the teeth displayed in a smile, displayed to the canine was 0.84%, displayed to the first premolar was 19.17%, displayed to the second premolar was 57.92%, displayed to the first molar was 20.00% and displayed to the second molar was 2.08%. The group of displayed to the first molar was the most esthetic. 6. At smiles, the width of the mouth corner was 0.46 times of the full face width, 0.95 times of the interpupillary distance, and 1.23 times of the resting position. 7. At smiles, the lengh of the upper lip was 0.71 times and lower lip was 0.93 times of the length in the resting position.

• The korean journal of orthodontics
• /
• v.23 no.3 s.42
• /
• pp.341-358
• /
• 1993

This study was investigated to evaluate the morphologic characteristics of deepbite tendency as multiple factors. The subjects consisted of 60 control subjects(male 25, female 35) and 137 deephite patients(68 male, 69 female). The deepbite group was composed of 4 subgroups(Class I 44, Class II div. 1 40, Class II div. 2 13, Class III 40). The mean age was 21.57 year for the control group 21 year for deepbite group lateral cephalograph in centric occlusion were taken, traced, and digitized for each subject. The statistically computerized analysis was carried out with SAS program. The results were as follows ; 1. In deepbite group, saddle angle is lesser than that of normal group. 2. The vertical dysplasia is prominent on anterior lower face and is closely related with mandibular form and inclination. 3. Without consideration of sagittal relationship, the dental factors such as curve of Spee, interincisal angle, U1 to upper lip length were prominent in the deepbite group. 4. Although there were individual variances in the perioral soft tissue profile, the lip presented more protruded pattern. 5. There was no significant difference in hyoid bone position and inclination between normal and deepbite group. 6. The multivariate discriminant analysis between normal and Class I deepbite group showed that curve of Spee, AB-MP angle, interincisal angle, articular agnle were critical in the determination of deepbite as multiple factors.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.24-30
• /
• 2008

One of the characteristics of the Maglev Train is the prominent capability of upgoing. Maglev train with the aim of longitudinal slope 7/100 is under development by the Center for Urban Maglev Program in Korea. To realize these slope, vertical curves must be inserted before and after the slope. The inserted curve has the radius of 3,000m generally. The insertion of these vertical curve results in the additional differences between the girder upper face and the guide rail, and the alignments are controlled by cast in place concrete at present. In this study, for longitudinal curved route with longitudinal slope 6/100, the applicability of PSC-U type girder and precast deck was evaluated for the span length 25m, 30m and vertical curve radii with 3,000m and 1,500m with respect to longitudinal slope 6/100.

• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.657-673
• /
• 1992

Orthodontic treatment of cleft patients is difficult as the growth is different from that of normal ones. So it is very important to know the characteristic features of the craniofacial morphology and growth pattern in unilateral cleft lip and palate patients. The materials for this study consisted of 55 normal males and 50 unilateral cleft lip and palate ones who received cheiloplasty and palatoplasty previously. The cleft subjects were divided into 4 groups according to their ages kto find out the growth pattern of hard and soft tissue, and to compare the features with those of normal ones. Each cephalogram analysed by McNamara method and others. The obtained results were as follows 1. In the unilateral cleft lip and palate subjects, forward growth of the maxilla was smaller than that of normal ones from 9 years old. So the maxilla was retruded. The maxillary incisors were severely retruded in all age groups. 2. The mandibular overall length and its anteroposterior position did not show any significant differences between two groups. But the height of ramus was very short and the mandible had vertical growth tendency to compensate for undergrowth of the maxilla in cleft subjects after 12 years of age. 3. Horizontal growth of the soft tissue in middle face was smaller than that of any other facial region from 9 years old. The vertical growth rate of upper lip was decreased as growing old. 4. In cleft subjects, the upper and lower facial component angle and the facial convexity angle were large. So their facial profile changed to straight or concave as growing old.