• Journal of Forest and Environmental Science
• /
• 제33권3호
• /
• pp.233-238
• /
• 2017

This study was carried out to figure out the number of logs for sawtimber by DBH and height class and to compare merchantable volume ratio by categorizing into sawtimber, lagging board and pulpwood, and others for Pinus densiflora, Pinus koraiensis, and Larix kaempferi. Logs for sawtimber were hardly produced in small DBH class of three species, but produced evidently from medium DBH class. In large DBH class, the number of logs for sawtimber were noticeably different among species: 4.3 logs for L. kaempferi, 2.6 logs for P. densiflora, and 1.0 logs for P. koraiensis on average. Similarly, merchantable volume ratio for sawtimber were largely different among species in large DBH class with higher than 15 m: 82% logs for L. kaempferi, 60% logs for P. densiflora, and 44% logs for P. koraiensis. When compared to the upper diameter and upper height by species with regard to the last log of a tree produced for sawtimber, upper diameter was smallest with 14.1 cm and upper height was highest with 12.2 m in L. kaempferi. Overall, L. kaempferi was considered as the more commercial species for sawtimber production than P. densiflora and P. koraiensis.

• 한국재료학회지
• /
• 제9권10호
• /
• pp.1032-1036
• /
• 1999

Pb($\textrm{Zr}_{0.5}\textrm{Ti}_{0.5}$)$\textrm{O}_3$ 강유전체의 상부 전극 크기를 변화시키며 펄스 전기장에 의한 전자 방출 특성 및 열화에 대하여 연구하였다. 상부 전극 크기 감소에 따라 상부 전극 모서리 부근에서 분극 반전에 기여하는 강유전체 분율이 증가되어 분극이 높아졌으며, ANSYS 5.3에 의한 전기장 시뮬레이션을 통하여 비대칭 전극 구조에서의 상부 전극 모서리 부근의 전기장이 증가한다는 것을 알 수 있었다. 분극 증가에 기여하는 상부 전극 모서리 주변의 강유전체의 부피 및 전극크기당 전자 방출량은 상부 전극 크기에 무관하였다. 전자 방출 횟수에 따라 상부 전극이 침식되어 분극 및 유전 상수는 감소하였으나 전극 복구에 의해 재생되었으며, 강유전체의 표면 손상에 의해 항전계 및 유전 손실은 증가되었다.

• 한국산림과학회지
• /
• 제106권4호
• /
• pp.480-486
• /
• 2017

본 연구는 국내 소나무, 잣나무, 낙엽송을 대상으로 입목의 총재적 중 상부직경 혹은 상부수고까지의 재적을 예측하는 이용재적모델을 개발하고자 수행되었다. 모델개발을 위하여 사용된 자료는 강원 및 경북지역의 소나무림, 잣나무림, 낙엽송림에서 수집한 총 131본의 수간석해목이었으며, 이용재적비율, 단순비율형태, 지수비율형태의 6개 이용재적식을 검토하여 최종모델을 개발하였다. 본 연구의 분석결과, 상부직경까지의 이용재적예측은 지수비율형태인 $V_d=V_t\{{\exp}[{\alpha}_1(d^{{\alpha}_2}/D^{{\alpha}_3})]\}$ 이 상부수고까지의 이용재적예측은 단순비율형태인 $V_h=V_t\{1+{\beta}_1(P^{{\beta}_2}/H^{{\beta}_3})\}$이 최종모델로 선정되었다. 본 연구에서 선정된 2개의 최적모델식을 정리하여 내재간곡선식을 도출하였으며, 이를 활용해 상부직경에 따른 상부수고와 상부수고에 따른 상부직경 예측이 가능하였다. 본 연구결과에서 개발된 모델은 높은 정확도뿐만 아니라 임업현장에서 편리하게 사용할 수 있어 활용도가 높을 것으로 판단된다.

• 소성∙가공
• /
• 제4권3호
• /
• pp.257-266
• /
• 1995

A simulation method based on upper bound method is developed in order to characterize forging characters in forging of spur gears. In this paper, utilizing a kinematically admissible velocity field and applying it to investigate the effect of inner diameter of holow billet. In the analysis, to predict the variation of inner diameter of hollw billet, neutral surface has been introduced. The neutral surface of each step is assumed as a circle and determined in order to have minimum forging energy by golden section method. By this method, the variation of inner diameter of billet during spur gear forging is successfully predicted. As a result, the selection of inner diameter of initial billet is very important to reduce the forging load.

• 한국정밀공학회지
• /
• 제11권4호
• /
• pp.26-37
• /
• 1994

A kinematically admissible velocity field for the numerical analysis of closed-die forging process of spur gear is proposed. The velocity field is divided into three regions of deformation. In the analysis, the involute curve is approximated to be straight line and the upper-bound method is used to calculate energy dissipation rate. A constant frictional frictional factor has been assumed on the contacting surfaces. The effects of root diameter, number of teeth, and friction factor are determined on the relative forging pressure. The frictionless relative pressure is independent of root diameter for the same number of teeth, but increases with the number of teeth on a given root diameter. In the presence of friction, the relative forging presure increasing root diameter at the start of forging, but decreases with increasing root diameter in the processing of forging.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.187-194
• /
• 2010

Shape optimization of an upper plenum of PBMR type gas cooled nuclear reactor has been performed by using three-dimensional Reynolds-Averaged Navier-Stokes (RANS) analysis and surrogate modeling technique. The objective function is defined as a linear combination of uniformity of flow distribution in the core and pressure drop in the upper plenum and the core. The ratio of thickness of slot to diameter of rising channels, ratio of height of upper plenum to diameter of rising channels, and ratio of eight of the slot at inlet to outlet, are used as design variables for optimization. Design points are selected through Latin-hypercube sampling. The optimal point is determined through surrogate-based optimization method which uses 3-D RANS analyses at design points. The results show that the optimum shape represent remarkably improved performance in flow uniformity and friction loss than the reference shape.

• 한국전산유체공학회지
• /
• 제15권3호
• /
• pp.16-23
• /
• 2010

Shape optimization of an upper plenum of a PBMR type gas cooled nuclear reactor has been performed by using three-dimensional Reynolds-Averaged Navier-Stokes (RANS) analysis and surrogate modeling technique. The objective function is defined as a linear combination of uniformity of flow distribution in the core and pressure drop in the upper plenum and the core. The ratio of thickness of slot to diameter of rising channels, ratio of height of upper plenum to diameter of rising channels, and ratio of height of the slot at inlet to outlet, are used as design variables for optimization. Design points are selected through Latin-hypercube sampling. The optimal point is determined through surrogate-based optimization method which uses 3-D RANS analyses at design points. The results show that the optimum shape represent remarkably improved performance in flow uniformity and friction loss than the reference shape.

• 대한치과보철학회지
• /
• 제52권1호
• /
• pp.34-41
• /
• 2014

연구 목적: 임플란트의 종류가 다양해짐에 따라 임플란트 드라이버의 호환성에 대한 연구가 필요하여 임플란트 제품별 드라이버의 형태를 분류하고 직경을 측정하여 비교 분석하였다. 연구 재료 및 방법: 단국대학교 부속치과병원에서 사용 중인 12개회사[Nobel Biocare (Nobel), Institute Straumann (Straumann), Zimmer Dental (TSV), Shinhung (Luna), Astra Tech Dental (Astra), Dentium (Dentium), Osstem Implant (Osstem), DIO Implant (DIO), BIOMET 3i (3i), NeoBiotech (Neo), Megagen Implant (Megagen), SNUCONE (SNUCONE)] 임플란트 제품 드라이버를 연구대상으로 하였으며 임플란트 드라이버의 형태를 분류하고 이 중 호환이 가능한 Hexagon과 torx에 해당하는 드라이버들의 유효길이, 유효길이별 상단, 중단, 하단의 직경을 각각 10개씩 측정하였다. 각 직경의 측정값을 호환성 분석공식에 대입하여 호환성을 산출하였다. 결과: 분석결과, 유효길이 상단에서는 Neo, 3i, Megagen, DIO, SNUCONE, Luna들은 같은 직경(1.20 mm)을 가졌으며 Osstem (1.17 mm)은 호환 가능한 범위에 있었다. Dentium, Astra는 같은 직경(1.25 mm)을 가지며 TSV (1.23 mm) 가 이들과 호환 가능하였다. 유효길이 중단에서는 Dentium과 Astra가 같은 직경(1.35 mm)을 가졌고 3i, DIO, Osstem, TSV도 1.25 mm의 동일한 직경을 가졌다. Neo와 Megagen은 가장 작은 직경(1.22 mm)로 나머지와 호환되었다. 유효길이 하단에서는 일부 드라이버에 호환성이 확인되었으나 대부분 나사의 연결부 깊이가 2 mm 이내인 점을 감안하면 유효하지 않은 결과로 판단되었다. Nobel은 Straumann에 사용할 수 있는 것으로 나타났으며 대부분의 hexagon driver를 trox에 사용할 수 있었다. 결론: 임플란트 드라이버의 각 부위별 직경을 측정한 결과 임플란트 제품간의 호환성이 존재한다는 것을 알 수 있었다. 그러나 호환성이 있는 드라이버의 반복적인 사용이 임플란트 나사와 드라이버에 미치는 영향에 대한 연구가 아직 부족하므로 응급상황 시에만 제한적으로 사용할 것을 권장하며 이에 대한 추가적인 연구가 필요할 것으로 사료된다.

• Nuclear Engineering and Technology
• /
• 제37권6호
• /
• pp.557-564
• /
• 2005

Air-water countercurrent flow limitation at perforated plates with four holes was investigated in a vertical tank to see the effects of the plate thickness, the number of hole, and the diameter of the hole on the onset of CCFL. The thickness of plates was 1 cm and 4 cm, with a relatively large hole diameter of 5 cm. The collapsed water level formed on the perforated plate and its distribution in the upper plenum were measured. The gas flow rate in the multi-hole plate is relatively higher than one in the single tube because some of holes in the multi-hole plate provide a flow path fur liquid with less air-liquid resistance than in the single tube. The onset of CCFL occurred at nearly the same air flow rate regardless of the plate thickness. The negligible effect of the plate thickness on CCFL means that the flooding is initiated at the top of the plate rather than at its bottom. It turns out that $j_k$ and $K_k$ better fit the data than $H_k$ when hole diameter is greater than 2.86 cm. In our experimental ranges, the collapsed water levels at the onset of CCFL ranged from 7.5 cm to 10.5 cm. There was no three dimensional distribution of water level before and after the onset of CCFL.

• 동아시아식생활학회지
• /
• 제7권1호
• /
• pp.87-95
• /
• 1997

One- to three-month-old infants (n=232) were compared their upper arm cumference and skinfold thickness(triceps, subscapular) by feeding methods in cross-sectional study. There were two groups : breast-fed(BF) and formula-fed groups(FF). As reported previously, weight, length, head and chest circumferences of these infants were good, and overall growth status was not significantly different by feeding methods, but weight, weight velocity and chest circumference of formula-fed infants were higher than breast-feds at 3month, significantly. Hear, the triceps skinfold thickness of infants at 1, 2, and 3 postpartum months were 7.4, 9.5 and 10.5 mm, respectively. The triceps skinfold thickness of breast-fed infants were higher than formula-feds at 1 and 2 postpartum month, but at 3 month that of formula-fed infants was greater than breast-fed infants, insignificantly. The subscapular skinfold thickness of infants were 6.4, 9.2 and 10.6 mm at 1 to 3 postpartum months, respectively. The upper arm circumference of infants were 11.7, 13.4, 14.3cm, and the arm muscle diameter were 34.5,39.3 and 41.7cm at one to three postpartum months, respectively. The upper arm circumference of male infants was higher than females at 2, 3 postpartum months. Overall, there were no signifiant differences between feeding methods in triceps and subscapular skinfold thickness, upper arm circumference and arm muscle diameter. But 3-month-old formula-fed male infant showed bigger significantly in arm circumference than the breast-feds. From this survey, long-term survey on growth and body composition of large scales might be necessary to determine the effect of feeding methods of infants after 3 months and to set proper body composition standard for infant.