• 대한전자공학회논문지SP
• /
• 제41권4호
• /
• pp.75-86
• /
• 2004

본 논문에서는 water flow model의 개념을 적용한 문서영상 이진화 방법의 속도를 개선하는 방법을 제안한다. 제안한 방법은 문서영상에서 문자 주위를 관심영역(region of interest: ROI)으로 추출하고 3차원 영상지형에서 물이 뿌려지는 영역을 관심영역 이내로 제한한다. 국부 계곡에 누적되는 물의 양은 계곡의 깊이와 경사를 이용하여 자동으로 결정된다. 그리고 계곡의 최저 지점뿐만 아니라 그 주위에도 가중치를 부여하여 물을 누적함으로써 관심영역에 해당하는 영상지형에 물을 붓는 과정을 한번만 수행하여 충분한 양의 물이 계곡에 채워지도록 한다. 계곡에 형성된 연못의 깊이는 배경과 문자의 밝기 차에 따라 다양하므로 연못의 깊이를 기준으로 문자 분리를 위한 임계치를 적응적으로 결정한다. 실제 문서영상에 대한 실험에서 제안한 방법의 수행속도가 water flow model에 기반 한 이진화 방법과 비교하여 월등히 향상되었으며 이진화 품질도 매우 우수함을 보였다.

• 한국전문물리치료학회지
• /
• 제3권2호
• /
• pp.49-54
• /
• 1996

The purposes of this study were to measure skin temperature and blood flow on the contralateral upper extremity when heat is applied to one upper extremity, were to compare the effect of contrast bath. The subjects were 38 healthy adults with no history of peripheral vascular disease. The subjects of contrast bath were 18 persons and the subjects of warm bath were 20 persons. The subjects of one group were seated with their right arm in water($42^{\circ}C$) up to the mid-forearm. The subjects of the other group were seated with their right arm up to the mid-forearm in water which was changed from warm to cold using the contrast bath technique. The continually changing temperatures and blood flow were measured by an independent observer at intervals of 10, 15, 20, 25 and 30 minutes respectively after the start of the procedure. The results were as follows. The temperature of the warm bath group rose 4.28% over the pre-experimental temperatures and the temperature of the contrast bath group rose 3.41%. There was no statistically significant difference between the two groups. The blood flow of the warm bath group rose 8.31% over the pre-experimental blood flow and the blood flow of the contrast bath group rose 17.24%. There was a statistically significant between the two groups 20 minutes after the start of the procedure. Thus the contrast bath is a more effective method than the warm bath to increase blood flow.

• 대한기계학회논문집
• /
• 제8권5호
• /
• pp.442-449
• /
• 1984

본 연구에서는 두 분류가 교우되어 배합이 이루어지는 유동역에서 3차원 방향 에 대하여 평균속도분포, 난류강도분포, 난류전단응력분포, 상관계수의 분포 및 난류 운동에너지와 운동량의 변화 등을 측정 분석하였다.

• 한국게임학회 논문지
• /
• 제17권2호
• /
• pp.165-174
• /
• 2017

본 연구는 건강 기능성 게임인 흡연시뮬레이션 게임의 몰입을 결정하는 요인에 대해 파악하고 이들 요인들이 몰입에 어떠한 영향을 미치는지 분석하였다. 특히 게임 중에 발생하는 뇌 활동 패턴이 게임몰입과 어떠한 상관관계를 가지는지 뇌파측정과 몰입과의 관계를 규명하고자 하였다. 이를 위해 게임몰입의 정도를 종속변인으로 설정하고 몰입에 영향을 미칠 수 있는 감정이입, 건강관심도, 생리적 지표인 뇌파(${\alpha},{\beta}$)를 독립변인으로 설정하여 회귀분석을 실시하였다. 연구결과 흡연시뮬레이션 게임에서 몰입에 감정이입, 건강관심도, ${\beta}$파는 정적으로 영향을 미치고 있었으며, ${\alpha}$파의 경우 부적으로 영향을 미치고 있음이 확인되었다. 본 연구는 기능성 게임몰입에 영향을 미칠 수 있는 사용자 경험과 신경생리학적 변화에 대하여 자기 보고와 더불어 뇌파측정을 통해 실증적으로 분석하고 게임몰입의 결정요인을 규명하고 있다는 점에서 이론적 의미가 있다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.333-338
• /
• 2003

Nano-imprint lithography(NIL) is a polymer embossing technique, capable of transferring nano-scale patterns onto a thin film of thermoplastics such as polymethyl methacrylate(PMMA) using this parallel process. Feature size down 10 nm have been demonstrated. In NIL, the pattern is formed by displacing polymer material, which can be squeeze flow of a viscous liquid. Due to the size of the pattern, a thorough understood of the process through experiments may be very different. Therefore we nead to resort to numerical simulation on the embossing process. Generally, there are two ways of numerical simulation on nano-scale flow, namely top-down and bottom-up approach. Top-down approach is a way to simulate the flow assuming that polymer is a continuum. On the contrary, in the bottom-up approach, simulation is peformed using molecular dynamics(MD). However, as latter method is not feasible yet. we chose the top-down approach. For the numerical analysis, two dimensional moving grid was used since the moving grid can predict the flow front. Effects of surface tension as well as the slip at the boundary were also considered.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.937-944
• /
• 2013

This paper describes an improved model that can be used for configuring a non-contact pneumatic head to handle a large sheet of glass. The cylindrical head model is of a large size (70 mm). It operates on vortex flow, which can simultaneously generate suction and repulsion over the flat object's surface. The head allows for the minimal non-contact lifting of objects weighing over 3N by using reference conditions (working pressure and head dimensions). Additionally, a functional flow-guide is applied for inducing a developing tangential vortex flow to increase suction and repulsion to the reference head. The cylindrical flow-guide is associated with relatively low tangential velocity. The improved model generates greater lifting force than the reference model, as verified experimentally.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권1호
• /
• pp.50-57
• /
• 2001

The thermal performance of cooling towers is affected by the temperature of inlet water, wet bulb temperature of entering air and water-air flow rate. In this stud${\gamma}$, the effects of these variables are simulated using NTU-method and experimentally investigated for the counter-flow cooling towers. The simulation program to evaluate these variables which affect the performance of cooling tower was developed. The maximum errors between the results of simulations and experiments were 3.8% under the standard design conditions and 5.4% under the other conditions. The performance was increased up to 46~50% as the water loading was increased from 6.8$m^3/hr{\cdot}m^2$ to 159$m^3/hr{\cdot}m^2$. The range was reduced up to 56~42% when the wet bulb temperature of the entering air was increased from 22${\circ}C$ to 29${\circ}C$.

• 한국추진공학회지
• /
• 제19권5호
• /
• pp.98-103
• /
• 2015

가속도추종 유로개방장치는 고속 비행체의 가압식 연료탱크에서 연료가 쏠림현상으로 인해 단절되는 것을 막아 연속적으로 흐르게 한다. 기개발된 이 유로개방장치를 실제 고속으로 시험하는 것은 까다로운 시험조건과 비용문제로 많은 어려움이 따른다. 따라서 본 논문에서는 저속 항공기에 탑재해 기본적인 역중력 시험(Negative-g test)을 수행하고 RecurDyn으로 해석한 결과와 비교하였다. 그리고 고속비행체의 비행궤적에 따른 유로개방장치의 동역학적 거동을 RecurDyn으로 알아보았다.

• 한국군사과학기술학회지
• /
• 제9권4호
• /
• pp.128-136
• /
• 2006

The purpose of this paper is to examine the dynamic stall characteristics of an elliptic airfoil when subject to constant pitch motions. In this study, which was motivated by the pressing need for a greater understanding of the reduced frequency$({\kappa})$ effects on flow patterns of elliptic airfoil, the various reduced frequencies were considered. The result confirms that the reduced frequency has a profound effects on the flow patterns. The increase of ${\kappa}$ accelerate the separation bubble bursting process up to ${\kappa}=0.10$, then diminish with further increase in ${\kappa}$. Compared with static condition, the dynamic pitching airfoil delays stall angle approximate $4{\circ}{\sim}5{\circ}$ during pitch-up stroke for ${\kappa}=0.10$. Results from this qualitative analysis provided valuable insight Into the control of dynamics stall.

• 한국소음진동공학회논문집
• /
• 제21권4호
• /
• pp.357-364
• /
• 2011

In this study, ring-shaped acoustic resonators were proposed to be installed in a silencer to increase the acoustic performance of silencer in the low-frequency range. Evaluation of noise reduction performance of acoustic resonator arrays was carried out by measuring the random-incidence absorption coefficient. It was found that the absorption coefficient of resonator array was measured up to 1 at 125 Hz of 1/3-octave band center frequency. Insertion losses of silencers with ring-shaped acoustic resonator arrays were measured based on ISO 7235. The results were shown that the ring-shaped resonator could increase the insertion loss up to 13 dB without flow, whereas 7 dB when flow speed reached 15 m/s. As increasing the flow speed above 15 m/s, the effect of acoustic resonator decreased due to the effect of nonlinear air damping of the resonator. It was also found that the increment of pressure drop by the presence of resonator arrays was about 9 % at flow speed of 25 m/s.