• Advances in materials Research
• /
• 제6권1호
• /
• pp.45-63
• /
• 2017

In this article, static deflection and buckling of functionally graded (FG) nanoscale beams made of porous material are carried out based on the nonlocal Timoshenko beam model which captures the small scale influences. The exact position of neutral axis is fixed, to eliminate the stretching and bending coupling due to the unsymmetrical material change along the FG nanobeams thickness. The material properties of FG beam are graded through the thickness on the basis of the power-law form, which is modified to approximate the material properties with two models of porosity phases. By employing Hamilton's principle, the nonlocal governing equations of FG nanobeams are obtained and solved analytically for simply-supported boundary conditions via the Navier-type procedure. Numerical results for deflection and buckling of FG nanoscale beams are presented and validated with those existing in the literature. The influences of small scale parameter, power law index, porosity distribution and slenderness ratio on the static and stability responses of the FG nanobeams are all explored.

• Proceedings of the Korea Information Processing Society Conference
• /
• 한국정보처리학회 2006년도 춘계학술발표대회
• /
• pp.153-156
• /
• 2006

본 논문에서는 H.264 표준화 기구인 Joint Video Team(JVT) 권고안의 정수 단위 화소 움직임 예측을 위한 Unsymmetrical-cross Multi-Hexagon-grid Search(UMHexagonS) 알고리즘에서 Uneven Multi-Hexagon-grid Search(UMHGS) 부분을 개선한 알고리즘을 제안한다. 제안하는 알고리즘은 이전 프레임의 동일위치 또는 상위 모드에서 이미 선택된 움직임 벡터(MV: Motion Vector)를 이용하여 신호 대 잡음 비(PSNR: Peak Signal to Noise Ratio) 및 평균 비트 율(Average Bitrates)을 유지하면서, 현재 매크로블록의 검색영역을 줄이는 것이 가능하다. 제안하는 알고리즘의 성능은 Full Search Block Matching Algorithm(FSBMA) 및 UMHexagonS 알고리즘의 integer pel 에 대한 SAD(Sum of Absolute Difference) 연산횟수로 비교평가 하였다. 그 결과, FSBMA 에 비하여 평균 97.64%, UMHexagonS 에 비하여는 평균 17.48%의 연산횟수를 감소시키는 우수함을 보였다.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.816-821
• /
• 2001

The generation of isolated grids by pulsed converters with characteristics close to the mains of the utility companies is a pretentious task. For generation of three-phase four-wire isolated grids are presented possible topologies and the demands on the system control are processed. For control of all conceivable load and error conditions, an extensive control technology is necessary. This must permit unsymmetrical operating conditions for an unlimited period but recognize errors simultaneously and therefore an overloading the consumer and the power semiconductors reliable may prevent. Measurement results on an experimental plant show the problems to be solved.

• Journal of the Society of Naval Architects of Korea
• /
• 제32권1호
• /
• pp.132-140
• /
• 1995

The structural behavior of sandwich plates with unsymmetricaly thick faces are analysed using Raleigh-Ritz Energy method by comparing the bending stresses, shear stresses, local bending stresses, membrane stresses of skin and core materials including local bending effect. As for sandwich materials, the combination of two types of face materials and three types of core materials are used in the analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.127-133
• /
• 2001

Photoelastic isochromatic fringes related to the difference of principal stresses have some bandwidth whose light intensities are not constant and unsymmetrical in experimental image. Hence it is difficult to measure fringe order accurately at a data point by visual observation. In this study, the method of fringe sharpening, which can extract sharpened lines from both full-and half-order fringes by digital image processing, is developed. To test the method, various simple photoelastic fringe patterns are simulated and their image are processed to yield sharpened lines. The method is than applied to general problem such as image of a circular disk compressed by concentrated loads and a cylinder subjected to internal pressure. The procedure is proved to be capable of extracting sharpened lines accurately from photoelastic isochromatic fringes.

• Structural Engineering and Mechanics
• /
• 제44권5호
• /
• pp.585-600
• /
• 2012

This paper presents a Modified Tikhonov Regularization (MTR) method in model updating for damage identification with model errors and measurement noise influences consideration. The identification equation based on sensitivity approach from the dynamic responses is ill-conditioned and is usually solved with regularization method. When the structural system contains model errors and measurement noise, the identified results from Tikhonov Regularization (TR) method often diverge after several iterations. In the MTR method, new side conditions with limits on the identification of physical parameters allow for the presence of model errors and ensure the physical meanings of the identified parameters. Chebyshev polynomial is applied to approximate the acceleration response for moderation of measurement noise. The identified physical parameter can converge to a relative correct direction. A three-dimensional unsymmetrical frame structure with different scenarios is studied to illustrate the proposed method. Results revealed show that the proposed method has superior performance than TR Method when there are both model errors and measurement noise in the structure system.

• Magazine of the Korean Society of Agricultural Engineers
• /
• 제37권E호
• /
• pp.72-78
• /
• 1995

To support some knowledge in planning irrigation system, short or long-term irrigation scheduling or determining irrigation reservoir capacity, it is necessary to estimate peak irrigation requirements and seasonal distribution of water demands for various return periods. In this paper Dry Day Index and Probable Evapotranspiration were evaluated to decide seasonal consumptive use of paddy rice for a design year using several decades' daily rainfall data and 5 years'('82~'86) actual evapotranspiration data, respectively. To obtain Dry Day Index that is defined as the number of probable dry days for a given period, Slade unsymmetrical distribution function was adopted. Dry Day Index was analysed for 5 and 10-day intervals. Each of them was evaluated with return periods of 1, 3, 5, 10 and 20 year. Their singnificance was tested by X$^2$ method. Based on these values, the Probable Evaportanspiration, that is the average daily ET both in dry days and rainy days during a given period, was estimated. Crop coefficient was also determined by the modified Penman equation proposed by Doorenbos & Pruitt.

• Proceedings of the Korean Information Science Society Conference
• /
• 한국정보과학회 2001년도 가을 학술발표논문집 Vol.28 No.2 (3)
• /
• pp.841-843
• /
• 2001

인터넷의 사용자가 급증하여 고가용성과 확장성을 지닌 고성능의 인터넷 서버들이 요구된다. 클러스터 시스템은 이러한 요구사항을 만족시킬 수 있는 서버이다. 본 연구에서는 N-node heartbeat 을 구현하였고, 이것을 기반으로 하는 고가용 부하분산 클러스터, PersistentCluster를 구현하였다. PersistentCluster는 로드 벨런서가 사용자의 요구를 서버들에게 분산시켜주는 LVS 시스템에서 로드벨런서가 고장나면 나머지 서버중에 하나가 그 역할을 인계 받아 계속 수행하는 고가용성 클러스터링 솔루tus이다. PersistentCluster는 로드벨런서만 heartbeat 메시지를 전송하는 비대칭 heartbeat을 채택하여 시스템의 메시지 전송 및 처리 오버헤드를 감소시켰다. 비대칭 heartbeat을 적용할 경우에 나타나는 각 노드의 부하 감소량을 실측하며 비대칭 heartbeat 의 성 능을 평가하였다.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.307-309
• /
• 2005

This paper studies the effects caused by symmetrical and unsymmetrical voltage sags on three-phase transformer and induction machine. The voltage sag on transformer and induction machine gives rise to inrush current. This inrush current makes sag more severe. These effects depend or many elements such as sag magnitude and duration, type of sag, and fault and recovery voltage instants.

• Journal of the Korean Institute of Rural Architecture
• /
• 제7권1호
• /
• pp.73-87
• /
• 2005

The purpose of this study is aimed at grasping the architectural characteristics of modern buildings in Gangneung from 1910's to 1970's. The results are as follows. 1) The commercial buildings are mostly unsymmetrical flat type and others except commercial buildings are mostly symmetrical flat type. 2)Up until the 1940's, staircases were located inner of building between the first and the second floor, however after the 1950's, they were separately located in one side of the building to ensure perpendicularly more space and easier mobility than before. 3)Windows were widely used in order to avoid monotonous wall elevation after 1950' s. 4)Striped decorations were put to use to decorate the front elevation of building. 5)Parapet which had decorative stripes to the top was generally used to hide roof.