• 한국지반공학회논문집
• /
• 제20권9호
• /
• pp.177-189
• /
• 2004

되메움되는 공간의 형상은 현장의 여건에 따라 수직 및 대칭 경사 또는 비대칭 경사를 포함하는 다양한 형태를 취할 수 있다. Kellogg(1993)는 대칭적으로 경사진 되메움 공간에서의 응력은 수직한 조건에서의 응력과는 다른 경계 조건이므로 이를 고려한 되메움 토압 이론식과 수평응력비를 제안하였다. Kellogg(1993)는 경사진 벽면에서 발생되는 응력을 되메움 흙의 단순한 내부마찰각으로 가정하였다. 이에 문(1997)은 경사진 벽면에서의 응력의 상태는 벽면마찰과 주응력의 회전방향에 따라 달라질 것을 예상하여 되메움 공간이 비대칭으로 형성되는 경우, 기존의 Kellogg(1993) 이론식에 대한 수정 Kellogg 이론식을 제안한 바 있다. 본 연구에서는 비대칭한 되메움 공간의 수평응력을 문(1997)의 수정 Kellogg 이론식에 기존 Kellogg(1993)의 수평응력비를 적용한 경우와 비대칭인 좌, 우측의 되메움 경사를 고려한 평균 수평응력비를 적용한 경우에 대하여 실내모형 토조실험과 수치해석으로 비구 검토하였다. 결과에 의하면 수정된 Kellogg 이론식에 Kellogg(1993)의 대칭한 조건에서의 수평응력비를 비대칭한 조건에 적용시킬 경우 경사진 벽면에서의 수평응력은 실험, 수치해석 결과에 매우 유사한 양상을 보이고 있으나 보다 수직한 벽면에서의 수평응력은 그 크기가 실험, 수치해석의 결과와는 상이한 결과를 보였다. 한편 비대칭 경사면 좌, 우측의 평균수평응력비를 수정 Kellogg 이론식에 적용하였을 경우에는 보다 수직한 면에서의 수평응력은 실험 및 수치해석 결과와 매우 유사한 결과를 나타냈다. 이러한 결과는 되메움 공간이 비대칭 조건을 형성하는 경우에는 좌, 우측 벽면 경사에 대한 평균 수평응력비의 적용이 고려되어져야 할 것으로 판단된다.

• 지질공학
• /
• 제11권2호
• /
• pp.175-190
• /
• 2001

오염된 연약지반에 편재하중이 작용하는 경우에 있어서 지반의 소성화에 따른 측방유동에 대한 거동을 규명하기 위하여 기존의 이론적인 배경을 고찰하고, 모형실험을 통하여 실측한 결과를 상호 비교.분석하였다. 모형실험은 모형재하장치인 토조와 재하틀 및 재하판을 제작하여 토조 안에 함수비를 일정하게 유지한 상태에서 자연지반의 시료와 오염물질을 점진적으로 증가시킨 지반시료에 대하여 일정한 시간 간격으로 편재하중을 증가시키면서 침하량과 측방변위량 및 융기량 등을 관측하였다. 그 결과 한계하중은 실험값이 Tschebotarioff(q$_{cr}$=3.0$_{cu}$)의 제안값과 Meyerhof(q$_{cr}$=(B/2H+$\pi$/2)$_{cu}$)의 제안값에 근접하여 q$_{cr}$=2.78$_{cu}$값을 나타냈고, 극한하중은 Prandtl의 제안값에 근접하여 q$_{ult}$=4.84$_{cu}$값을 나타냈다. 측방유동압은 Matsui.Hong의 이론식에 의해서 산정함이 비교적 적절하며, 측방유동압의 최대값은 토층두께(H)의 0.3H 부근에서 발생하였으며, 복합형과 Poulos의 분포형태 및 오염되지 않는 연약점토(CL, CH)지반 보다 지표면측으로 상승하여 발생하였다. 안정관리방법은 지반의 측방유동에 의한 소성변위량을 많이 이용하고 있는 부영.교본, 자전.관구, 송미.천촌 등의 안정관리도에 적용한 결과 송미.천촌의{S$_{v}$-(Y$_{m}$/S$_{v}$)}관리도와 자전.관구의 {(q/Y$_{m}$)-q}관리도에서 얻어진 극한하중은 하중-침하량곡선 (q-S$_{v}$)에서 얻어진 극한하중 보다 적은 경향을 나타냈다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.920-922
• /
• 2002

This paper investigates the cogging torque reduction in a brushless DC(BLDC) motor having an inner-rotor with surface-mounted segment-type permanent magnets. The kind of magnets for the BLDC motor could have different waveforms of magnetization such as square, trapezoidal and sinusoidal form. This paper discusses the effect of the unsymmetrical magnetization distribution in the segment-type permanent magnet, which is able to obtain through a segment structure that the number of poles per segments is 2 ($N_p/N_s$), on the cogging torque and EMF waveform. Where the existing magnetizer fixture for the square-type magnetization is used to magnetize the magnets in two segment structures of $N_p/N_s$ = 1 and 2. The effectiveness of the proposed designs had been confirmed by comparing cogging torque, and EMF waveform between conventional and new models which are analyzed by Finite Element Method (FEM).

• 대한토목학회논문집
• /
• 제14권4호
• /
• pp.977-988
• /
• 1994

본 연구는 연약지반상에 sand drain을 타설하고 성토하여 교대 및 교각을 시공하는 진월 인터체인지에서 기초지반의 침하, 융기 및 이미 시공된 교각기초부분의 수평방향 변위를 측정한 실측치와 Sekiguchi의 탄 점소성모델을 Biot의 압밀방정식과 결합하여 2차원 평면변형용조건으로 유한요소해석한 결과를 비교 검토하였다. 이때 교각기초인 강판말뚝은 등가의 강널말뚝벽으로 환산하였다. 그리고 환산한 벽체에 축력의 변화, 강성의 변화, 지지조건의 변화 및 고정점위치의 변화 동에 따른 기초지반의 거동과 강널말뚝벽체의 거동 특성을 밝혔다.

• Computers and Concrete
• /
• 제26권4호
• /
• pp.317-325
• /
• 2020

A precise estimation of the natural time period of buildings improves design quality, causes a significant reduction of the buildings' weight, and eventually leads to a cost-effective design. In this study, in order to optimise the reinforced concrete frames design, some symmetrical and unsymmetrical buildings composed of solid and hollow members have been simulated using finite element software SAP 2000. In numerical models, different parameters such as overturning moment, story drift, deflection, base reactions, and stiffness of the buildings were investigated and the results have been compared with strength and serviceability limit criteria proposed by Australian Standard (AS 3600 2018). Comparing the results of the numerical modelling with existing standards and performing a cost analysis proved the merits of hollow box sections compared to solid sections. Finally, based on numerical simulation results, two equations for natural time period of moment resisting reinforced concrete buildings have been presented. Both derived equations reflected higher degree of correlation and reliability with different complexities of building when compared with existing standards and relationships provided by other scholars. Therefore, these equations will assist practicing engineers to predict elastic behaivour of structures more precisely.

• Bulletin of the Korean Chemical Society
• /
• 제25권4호
• /
• pp.491-500
• /
• 2004

The Lewis acid-catalyzed reactions of anthrone with a variety of ethylenic substrates under various conditions have been studied. It has been observed that depending on kinds of ethylenic substrates and catalysts, products were varied. In particular, the $ZnCl_2$-catalyzed reaction of anthrone with ${\alpha},{\beta}$ -unsaturated ester gave bridged compounds 3 (Diels-Alder adduct type) and mono-Michael adduct 4 exclusively, while the base-catalyzed reaction gave 10,10-bis-Michael adduct as a major product independent of the amount of ethylenic substrate and base. Bridged compounds 3 were easily converted to the corresponding mono-Michael adduct 4 by a catalytic amount of base. Further Michael reaction of mono-Michael adducts with different ethylenic substrates in the presence of a catalytic amount of alkoxide gave unsymmetrical 10,10-bis Michael adducts in good or moderate yields.

• 대한화학회지
• /
• 제58권2호
• /
• pp.193-197
• /
• 2014

Dibenzo-18-crown-6, dibenzo-21-crown-7 and dihydroxy dibenzo-18-crown-6 were synthesized by Bayer-Villiger oxidation strategy. Dibenzo-18-crown-6 and dibenzo-21-crown-7 could be synthesized through a three-step protocol starting from salicylaldehyde. Salicylaldehyde was reacted with bis-(2-chloroethyl)ether using $K_2CO_3$ in acetonitrile to link the two phenolic groups with the oxyethylene bridge followed by conversion of the formyl group to the hydroxy group via a Baeyer-Villiger reaction and finally linking the two phenolic group with appropriate oxyethylene bridge. The two target crown ethers were obtained in overall yield, 24% and 30%, respectively. This method has a great potential for synthesis of symmetrical as well as unsymmetrical dibenzo crowns with varying oxyethylene bridges. Baeyer-Villiger oxidation could be used to prepare dihydroxy derivative of dibenzo-18-crown-6 through acetylation of dibenzo-18-crown-6 followed by Baeyer-Villiger oxidation. The Baeyer-Villiger oxidation could be substantially accelerated using trifluoroacetic acid.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.390-403
• /
• 2017

Smoothed Particle Hydrodynamics (SPH) method has a good adaptability for the simulation of free surface flow problems. There are two forms of SPH. One is weak compressible SPH and the other one is incompressible SPH (ISPH). Compared with the former one, ISPH method performs better in many cases. ISPH based on Rankine source solution can perform better than traditional ISPH, as it can use larger stepping length by avoiding the second order derivative in pressure Poisson equation. However, ISPH_R method needs to solve the sparse linear matrix for pressure Poisson equation, which is one of the most expensive parts during one time stepping calculation. Iterative methods are normally used for solving Poisson equation with large particle numbers. However, there are many iterative methods available and the question for using which one is still open. In this paper, three iterative methods, CGS, Bi-CGstab and GMRES are compared, which are suitable and typical for large unsymmetrical sparse matrix solutions. According to the numerical tests on different cases, still water test, dam breaking, violent tank sloshing, solitary wave slamming, the GMRES method is more efficient than CGS and Bi-CGstab for ISPH method.

• Structural Engineering and Mechanics
• /
• 제60권3호
• /
• pp.387-404
• /
• 2016

In this paper, the response and failure of sharp-notched 6061-T6 aluminum alloy circular tubes with five different notch depths of 0.4, 0.8, 1.2, 1.6 and 2.0 mm subjected to cyclic bending were experimentally and theoretically investigated. The experimental moment-curvature relationship exhibits an almost steady loop from the beginning of the first cycle. And, the notch depth has almost no influence on its relationship. However, the ovalization-curvature relationship exhibits a symmetrical, increasing, and ratcheting behavior as the number of cycles increases. In addition, a higher notch depth of a tube leads to a more severe unsymmetrical trend of the ovalization-curvature relationship. Focusing on the aforementioned relationships, the finite element software ANSYS was used to continue the related theoretical simulation. Furthermore, the five groups of tubes tested have different notch depths, from which five unparallel straight lines can be observed from the relationship between the controlled curvature and the number of cycles required to produce failure in the log-log scale. Finally, a failure model was proposed to simulate the aforementioned relationship. Through comparison with the experimental data, the proposed model can properly simulate the experimental data.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.39-44
• /
• 2017

This paper proposes a novel approach to determine symmetrical components of power system by applying method of least squares in time domain. For the modern power system stability, clearance of faults on high voltage transmission lines in zero response time is crucial and important. Symmetrical components have a great attention since last century. They have been found an effective tool for the analysis of symmetrical and unsymmetrical faults in power system. Moreover, magnitude of symmetrical components are also used as a caution about faults in system. With rapid changes in technology, Microprocessor assumed to be fastest machine of the modern era. Hence microprocessor based techniques were developed and implemented for last few decades. The proposed technique apply least square method in the computation of symmetrical components which is suitable as an application in microprocessor based monitoring and controlling power system in order to avoid cascading failures. Simulation of proposed model is carried out in MATLAB/SIMULINK and all results exploit the validity of model.