• 한국의류산업학회지
• /
• 제12권4호
• /
• pp.513-522
• /
• 2010

The aim of this study is to investigate the actual state for the development of the thermally comfortable uniform for workers on a low temperature storage. Observation, interview and survey were executed focusing on the environment, clothing, and human factors which have effects on the comfort of workers. Of 400 distributed, 253 questionnaires were analyzed through descriptives, frequency, ANOVA, t-test, multi-response analysis, correlation analysis with SPSS 12.0. The results are following. Coming and going between a selling area and cold storages, the workers showed to experience a big temperature gap. They indicated to feel cold on face and hands which were not covered by clothing and have got sick because of low temperature. The workers wanted the uniform made of functional fabrics, especially heat insulation fabrics. Female workers rather than male workers, the older, and the longer their working period were, the more uncomfortable they revealed to feel. The workers who works on the daily products part or mainly on the freezer appeared to feel cold more than any other workers. In conclusion, it was found that the uniform which consider steady state and unsteady state heat transfer together must be developed.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.197-200
• /
• 2015

Understanding the slag flow behavior is important in an entrained coal gasifier for its influence of ash discharge and wall heat transfer rate. This study presents a new model to predict the transient behavior of the liquid and solid slag layers. Unlike the previous steady-state model, the solid slag layer was included in solving the governing equations in order to identify the temporal and spatial transformation between the solid-liquid slag, rather than treating the solid region as a boundary condition of the liquid layer. The performance of the new model was evaluated for changes in the slag deposition rate (${\pm}10%$) and gas temperature (${\pm}50K$) in a simple cylindrical gasifier. The results show that the characteristic times to reach a new steady-state ranged between 80 s to 180s for the changes in the two parameters. Because the characteristic times of the gasifier temperature and slag deposition rate by changes in the coal type and/or operating conditions would be almost instantaneous, the time-scale for the slag thickness at the bottom of the gasifier to stabilize was much larger.

• Wind and Structures
• /
• 제17권4호
• /
• pp.379-397
• /
• 2013

Large Eddy Simulations (LES) were carried out to investigate the aerodynamic characteristics of a rectangular cylinder with side ratio B/D=5 at Reynolds number Re=22,000 (based on cylinder thickness). Particular attention was devoted to the effects of velocity shear in the oncoming flow. Time-averaged and unsteady flow patterns around the cylinder were studied to enhance understanding of the effects of velocity shear. The simulation results showed that the Strouhal number has no significant variation with oncoming velocity shear, while the peak fluctuation frequency of the drag coefficient becomes identical to that of the lift coefficient with increase in velocity shear. The intermittently-reattached flow that features the aerodynamics of the 5:1 rectangular cylinder in non-shear flow becomes more stably reattached on the high-velocity side, and more stably separated on the low-velocity side. Both the mean and fluctuating drag coefficients increase slightly with increase in velocity shear. The mean and fluctuating lift and moment coefficients increase almost linearly with velocity shear. Lift force acts from the high-velocity side to the low-velocity side, which is similar to that of a circular cylinder but opposite to that of a square cylinder under the same oncoming shear flow.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.573-578
• /
• 2019

Anisotropic distribution of the turbulent kinetic energy and the near-field excitations are the main causes of the steady state Flow-Induced Vibration (FIV) which could lead to fretting wear damage in vertically arranged supported slender rods. In this article, a combined Computational Fluid Dynamics (CFD) and Computational Structural Mechanic (CSM) approach named two-way Fluid-Structure Interaction (FSI) is used to investigate the modal characteristics of a typical rod's vibration. Performance of an Unsteady Reynolds-Average Navier-Stokes (URANS) and Large Eddy Simulation (LES) turbulence models on asymmetric fluctuations of the flow field are investigated. Using the LES turbulence model, any large deformation damps into a weak oscillation which remains in the system. However, it is challenging to use LES in two-way FSI problems from fluid domain discretization point of view which is investigated in this article as the innovation. It is concluded that the near-wall meshes whiten the viscous sub-layer is of great importance to estimate the Root Mean Square (RMS) of FIV amplitude correctly as a significant fretting wear parameter otherwise it merely computes the frequency of FIV.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.555-562
• /
• 1998

비균일 자장이 도가니에 인가되어 있는 상황에서 정상상태의 Czochralski 유동장과 비정상상태의 산소농도장에 대한 연구가 수치해석적인 방법으로 연구되었다. 여기에서 기준 자장의 세기가 B=0.1T, 0.2T, 0.3T의 경우에 대한 연구가 수행되었다. 가열에 의한 부력의 효과와 자유표면의 표면장력에 의한 열모세관 효과에 의하여 유발되는 자오면 유동은 비균일 자장에 의하여 차등적으로 억제되고 있다. 자자의 세기가 증가하면 자오면 유동에서 발생하는 순환류의 중심은 결정으로 접근하며, 순환류의 크기도 작아진다. 결정으로 흡수되는 산소의 세기가 클수록 낮아지며 농도분포는 균일해지는 경향을 갖는다.

• 한국전산유체공학회지
• /
• 제15권1호
• /
• pp.1-8
• /
• 2010

RCCS is a passive safety-related system that removes the decay heat of VHTR when normal decay heat removal systems are in failure. Understanding thermo-hydraulics of RCCS is important to design a safer VHTR. RCCS consists of 292 cooling panels, which are placed in the reactor cavity. The layout of RCCS gives an idea that, for CFD simulations, cooling panels can be assumed to be one annulus tube. This assumption can reduce significantly the computational time, especially for the unsteady simulation. To simulate RCCS in an axisymmetric manner, three models were suggested and compared. Each model has (1) the same outer radius, (2) the same cross-sectional area (3) the same pressure drop, respectively, as the RCCS cooling panels. The steady-state simulation was conducted with these three models and the DO radiation model. It is found that over 90% of the heat from the outer wall of the reactor pressure vessel is transported to the RCCS by radiative heat transfer. The simulation with the third model, which has the same pressure drop as the design, estimates the closest wall temperature profiles to a thermo-hydraulic code, GAMMA+, result.

• 한국식품영양학회지
• /
• 제10권4호
• /
• pp.462-467
• /
• 1997

최근 건조 및 탈수공정으로 사용되고 있는 침지(soaking)에 의한 방법인 DIS 공정(dewatering and impregnation soaking process)은 상온에서 침지용액에 식품시료를 담금으로서 시료내의 수분이 탈수되는 현상을 이용한 공정으로서 이 때 용액 속의 용질들이 시료 속의 세포 내로 침투하는 확산현상도 동시에 발생한다. 따라서 영양분의 손실과 관능적 품질저하를 억제할 수 있으며, 건조시의 에너지를 절감하는 등의 특성을 갖는다. DIS 공정에서는 용질의 크기에 따라 원형질막 분리현상과 세포벽 붕괴현상이 발생하며, 시료의 조직상태와 운전조건에 의하여 그 탈수 정도는 차이가 나타난다. DIS 공정을 제어하기 위한 모형화는 주로 비정상상태에서의 Fick의 법칙과 물질수지를 기초로 한 여러 가지 모델들이 제안되어 등온상태에서 시간에 따른 탈수량과 용질 침투량을 정확히 예측하고자 하고 있다.

• 환경위생공학
• /
• 제24권4호
• /
• pp.80-89
• /
• 2009

In the organic waste, food waste is the most difficult controls. In the study, food waste was treatmented to removal only the dockage. To decrease the hydrogen sulfide($H_2S$) in the produced biogas, iron chloride put in the anaerobic digester. Respectively treatment quantity of the food waste, content of the methane($CH_4S$) gas in the biogas, produced gases quantity, put in the quantity of the Iron chloride, pH, TS, Alkalinity, VFA, Ammonia. The results obtained from the experiment are as follows: 1. The produced biogases quantity/the treatment quantity of the food waste was $83.82{\sim}129.41m^3/ton$. 2. The content of the hydrogen sulfide($H_2S$) in the produced biogas is below of the 500ppm. The iron chloride put in the anaerobic digester. 200~300kg of the iron chloride put in the anaerobic digester at the steady-state. 400~850kg of the iron chloride put in the anaerobic digester at the unsteady-state. 3. Factor of the operator was the pH: 7.7~8.4, content of mathane: 55~65%. 4. TS(total solid) of the digestor sludge was 17~20%, Alkalinity was 38,500~41,750ppm, VFA(Volatile Fatty Acids) was 2,800~2,420ppm, Ammonia was 4,300~3,650ppm.

• 대한기계학회논문집B
• /
• 제23권6호
• /
• pp.769-777
• /
• 1999

This paper presents models for the dynamic simulation of a regenerative gas turbine and describes dynamic behaviors of a small regenerative engine. A quasi-steady model is introduced where the inertia of the working fluid is assumed to be negligible compared with the mechanical inertia of the rotating shaft. Based on this quasi-steady model, the transient model for the heat exchanger is employed to simulate the unsteady heat exchange in the recuperator. The effect of the thermal inertia of the recuperator metal on transient behaviors is analyzed by comparing the predicted results of the transient and steady state heat exchanger models. For several load change modes such as sudden increase, decrease and periodic variation, engine dynamic characteristics are investigated by applying a fuel control logic for the constant shaft speed. It is found that the thermal inertia of the recuperator metal has a dominant effect on the whole engine dynamic behavior.

• 한국항공우주학회지
• /
• 제30권7호
• /
• pp.29-35
• /
• 2002

접는 미사일 조종날개의 공력탄성학적 특성을 조사하였다. 접는 미사일 조종날개는 2차원 익형 모델로 가정하였다. 초음속 DPM을 이용하여 초음속 비정상 공기력을 계산하였으며, 최소 상태 변수 근사법을 이용하여 비정상 공기력을 근사화하였다. 선형 및 비선형 플러터 해석을 위해 근궤적법과 시간적분법을 사용하였다. 비선형 플러터 해석을 위해 전개부의 힌지는 비대칭 이선형 스프링으로 가정하였으며, 기술함수를 이용하여 선형화하였다. 플러터 해석으로부터, 비선형 파라미터가 공력탄성학적 특성에 미치는 영향을 조사하였다.