• International Journal of Fluid Machinery and Systems
• /
• v.2 no.4
• /
• pp.315-323
• /
• 2009

Pressure oscillations triggered by the unstable interaction of dynamic flow features of the hydraulic turbine with the hydraulic plant system - including the electrical design - can at times reach significant levels and could lead to damage of plant components or could reduce component lifetime significantly. Such a problem can arise for overload as well as for part load operation of the turbine. This paper discusses an approach to analyze the overload high pressure oscillation problem using computational fluid dynamic (CFD) modeling of the hydraulic machine combined with a network modeling technique of the hydraulic system. The key factor in this analysis is the determination of the overload vortex rope volume occurring within the turbine under the runner which is acting as an active element in the system. Two different modeling techniques to compute the flow field downstream of the runner will be presented in this paper. As a first approach, single phase flow simulations are used to evaluate the vortex rope volume before moving to more sophisticated modeling which incorporates two phase flow calculations employing cavitation modeling. The influence of these different modeling strategies on the simulated plant behavior will be discussed.

• Journal of Energy Engineering
• /
• v.10 no.4
• /
• pp.363-369
• /
• 2001

Process design and performance evaluation were made for medium-size gasification combined/cogeneration plant. Based on the designed plant process configuration, the effects of $NO_x$ reduction techniques on the $NO_x$ emission, the power output, the efficiency and the stability of plant are investigated by applying various $NO_x$ reduction methods such as unsaturated/saturated nitrogen injection and fuel saturation of gas turbine combustor. The $NO_x$ reduction by nitrogen injection is more remarkable than that by fuel saturation, and its effect can be more enhanced by using saturated nitrogen. In addition, the applications of $NO_x$ reduction techniques accompany the improvement of plant power output and efficiency with the decrease of $NO_x$ emission, while it can cause unstable gas turbine operation.

• Journal of Plant Biotechnology
• /
• v.4 no.1
• /
• pp.29-32
• /
• 2002

The ability to form embryiod from callus in satsuma mandarin is low and unstable. In this study, the conditions of embryogenic calli induced from nucellar tissue for promotion of plant regeneration in satsuma mandarin were investigated. The calli of I, II and III line were divided into two sizes of 0.5 mm and 1.0 mm in diameter and two weight gradients of percoll at 40% and 50% though the filter mesh. The frequency of embryo formation from $\phi$ 1.0mm-40% was slightly higher than callus that from others. Adventitious embryoids developed to a globular stage were transferred to regeneration medium. In 'Miyagawa Wase', the embryos from I and II line developed into a heart stage from most of $\phi$ 0.5 mm- 40% and $\phi$1.0 mm-40% calli, but it failed in 'Sugiyama Unshu'. In the cultivar of 'Miyagawa Wase', 63% of adventitious embryos transferred to the regeneration medium developed into the heart stage from the most $\phi$ 1.0 mm-40% calli of I line, but of 'Sugiyama Unshu' failed in some calli condition. The embryoids from two callus lines developed further to shoots and plantlets, while the embriods from III line abnormal failed to regenerate in the cultivar. From these results, it is suggested that the plant regeneration from embryogenic callus in satsuma mandarin could be affected by callus conditions.

• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.137-144
• /
• 2006

Oil-fired power plants usually use several burners and the combustion air is supplied to each burner through the complicated duct which is called windbox. A windbox should be designed to supply combustion air to each burner evenly but, due to the complicated duct shape, flow distribution in the windbox is unbalanced and uneven supplies of combustion air to each burner are induced by these unbalanced flow distribution in the windbox. These flow patterns tend to make flame unstable, increase the formation of pollutants and lower the overall combustion efficiency. To prevent these disadvantages, flow patterns in the windbox should be investigated for the uniform flow distribution. In this study, computational simulation method was used to investigate the flow distribution in the windbox and measured the velocities at the exit of burners in the real windbox to compare with CFD results. The results show two significant flow patterns. One is that the flow rates of each burner are different from each other and this means that all burners operate in different conditions of air to fuel ratio. The other is that the flow distribution at the exit of each burner is not axi-symmetric although the burner shape is axi-symmetric and this increases the pollutant products like CO.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.3
• /
• pp.240-250
• /
• 2000

In this study, DWTP Advisor developed from U.S. EPA was adapted for performance assessment in small water treatment plant and studied for improvement advice about the problem. From results of performance assessment, the ability of each major unit process meets to Peak Instantaneous Flow(PIF) as Type I (above 95% of PIF) in N WTP. But, outlet condition in the sedimentation basin are permitting the loss of solids from the basin and the lack of proper solids removal is degrading the performance in N WTP. From results of the hydraulic analysis using fluoride tracer, flow rate in sedimentation basin is rapidly more lower than upper. The Reynolds number, Re, and Froude number, Fr which are used to predict flow condition in sedimentation basin is calculated to be 3159.98 and $2.06{\times}10^{-7}$, respectively. There is possibility of occurrence of short-circuiting and turbulence. Also, the different type of effluent trough makes unstable flow in sedimentation basin and increases carry-overing of sedimented solids.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.85-92
• /
• 2005

Oil-fired power plants usually use several burners and the combustion air is supplied to each burner through the complicated duct which is called windbox. A windbox should be designed to supply combustion air to each burner evenly but, due to the complicated duct shape, flow distribution in the windbox is unbalanced and uneven supplies of combustion air to each burner are induced by these unbalanced flow distribution in the windbox. These flow patterns tend to make flame unstable, increase the formation of pollutants and lower the overall combustion efficiency. To prevent these disadvantages, flow patterns in the windbox should be investigated for the uniform flow distribution. In this study, computational simulation method was used to investigate the flow distribution in the windbox and measured the velocities at the exit of burners in the real windbox to compare with CFD results. The results show two significant flow patterns. One is that the flow rates of each burner are different from each other and this means that all burners operate in different conditions of air to fuel ratio. The other is that the flow distribution at the exit of each burner is not axi-symmetric although the burner shape is axi-symmetric and this increases the pollutant products like CO.

• Korean Journal Plant Pathology
• /
• v.3 no.3
• /
• pp.198-202
• /
• 1987

Toxic metabolites ('Toxins'), produced by Helminthosporium sativum causing leaf blotch in barley and root rot in barley and wheat were partially purified through C-18 column. The partially purified toxins appeared heat unstable and lipophilic. The responses of toxins to wheat and barley root corresponded with those to lettuce growth with the different concentrations. The determination of the concentration of toxins produced was developed using the dilution end-points. The equation [Y = a log X + b) was obtained from the semi-log­graphy with the linear analysis. The values 'a' and 'b' were discussed with the responses of several plants on the toxin produced by H. sativum.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.1
• /
• pp.10-18
• /
• 2004

The urban ecosystem, unlike the natural ecosystem, has been affected by the urban environment, so the existences of normal creatures have been threatened and eventually the stability has declined to consist of those that have adapted to such. Therefore, by creating a list of such organisms, their number of variety can be found out and their ecological distinction can be understood. Because flora is known to be an ecological index reflecting region's effects of human and societal environments, weather, and climates, it is a useful method of finding out the ecological position and distinctiveness of that region. The study site is part of watershed at Yangjae Stream, Kahngnam-ku, Seoul. In this study, the difference of flora in each land use type are investigated by plant identification. The purpose of this study is to evaluate the city's plant surviving environment, and eventually to contribute to the restoration of urban green spaces by finding out the plants which are appropriate for the corresponding environment. After doing the study, it was found that the urban forest is the most stable urban ecosystem while the urban park is seriously disturbed, and ecologically unstable. The urban stream is also disturbed continuously.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.4
• /
• pp.614-623
• /
• 2015

When the speed of a coaxial rotor helicopter in forward flight increases, the wake skew angle of the rotor increases and consequently the position of the vena contracta of the upper rotor with respect to the lower rotor changes. Considering ambient air and the effect of the upper rotor, this study proposes a nonuniform inflow model for the lower rotor of a coaxial rotor helicopter in forward flight. The total required power of the coaxial rotor system was compared against Dingeldein's experimental data, and the results of the proposed model were well matched. A plant model was also developed from first principles for flight simulation, unknown parameter estimation and control analysis. The coaxial rotor helicopter used for this study was manufactured for surveillance and reconnaissance and does not have any stabilizer bar. Therefore, a feedback controller was included during flight test and parameter estimation to overcome unstable situations. Predicted responses of parameter estimation and validation show good agreement with experimental data. Therefore, the methodology described in this paper can be used to develop numerical plant model, study non-uniform inflow model, conduct performance analysis and parameter estimation of coaxial rotor as well as other rotorcrafts in forward flight.

• Journal of the Korean Society of Combustion
• /
• v.11 no.1
• /
• pp.1-10
• /
• 2006

Oil-fired power plant usually uses several burners and combustion air is supplied to each burner through the complicated duct which is called windbox. A windbox should be designed to supply combustion air to each burner uniformly but, due to the complicated duct shape, flow distribution in the windbox is unbalanced and non-uniform supplies of combustion air are induced by these unbalanced flows in the windbox. These flow patterns tend to make flame unstable, increase the formation of pollutants and lower the overall combustion efficiency. To prevent these disadvantages, flow patterns in the windbox should be investigated for the uniform flow distribution. In this study, computational simulation method was used to investigate the flow distribution in a windbox and measured the velocities at the exit of burners in a real windbox and model tests to compare with CFD results. The results show two significant flow patterns. One is that the flow rates of each burner are different from each other and this means that all burners operate in different conditions of air to fuel ratio. The other is that the flow distribution at the exit of each burner is not axi-symmetric although the burner shape is axi-symmetric. Additionally some modifications of windbox shape and installation of baffles were proposed to make the uniform flow in the windox.