• 대한토목학회논문집
• /
• 제36권6호
• /
• pp.991-998
• /
• 2016

초기평형상태를 만족하는 간략해석법(Jung et al., 2015)의 무응력길이를 이용하여 사장교의 임의 시공단계를 직접적으로 모사할 수 있는 무응력길이 기반의 시공단계 해석법을 제시하고, 이 방법의 효용성과 정확성을 보이고자 한다. MIDAS해석 시 unknown load factor기능을 이용한 초기형상해석과 lack of fit force기능을 이용한 순방향해석을 실시하는데 반하여 ULM (unstrained length method)해석법은 무응력길이만 알고 있으면 중간단계를 거치지 않고 직접적으로 특정중간단계를 해석할 수 있다. 2차원 인천대교모델을 구축하고 ULM과 MIDAS를 각각 적용하여 시공단계해석을 수행하고, 수치예제를 통하여 두 해석결과를 분석한 결과, 완공계의 주탑, 주거더의 길이 차이로 인한 오차를 제외하면 비교적 서로 일치하는 결과를 보였다. 아울러, 포장무게와 카운터웨이트를 역으로 재하하여 폐합해석을 수행하고, 결과비교를 통하여 두 해석결과의 타당성을 보였다.

• Structural Engineering and Mechanics
• /
• 제40권1호
• /
• pp.65-84
• /
• 2011

In this paper a simple mathematical model for approximate static analysis of combined system of framed tube, shear core and two outrigger-belt truss structures subjected to lateral loads is presented. In the proposed methodology, framed tube is modeled as a cantilevered beam with a box section and interaction between shear core and outrigger-belt truss system with framed tube is modeled using torsional springs placed at location of outrigger-belt truss; these torsional springs act in a direction opposite to rotation generated by lateral loads. The effect of shear lag on axial deformation in flange is quadratic and in web it is a cubic function of geometry. Here the total energy of the combined system is minimized with respect to lateral deflection and rotation in plane section. Solution of the resulting equilibrium equations yields the unknown coefficients of shear lag along with the stress and displacement distributions. The results of a numerical example, 50 storey building subjected to three different types of lateral loading obtained from SAP2000 are compared to those of the proposed method and the differences are found to be reasonable. The proposed method can be used during the preliminary design stages of a tall building and can provide a better understanding of the effects of various parameters on the overall structural behavior.

• 대한조선학회논문집
• /
• 제32권4호
• /
• pp.55-63
• /
• 1995

본 논문은 경계적분법에 의해 날개끝판이 부착된 프로펠러(EPP)의 성능을 해석하는 방법을 기술하고 있다. 나선 프로펠러 날개와 날개끝판을 사각형 판요소로 치환하고, 균일 세기의 쏘오스와 법선 다이폴을 분포하여 해석한다. 포텐셜을 기저로 하는 정식화 과정을 통해 적분방정식을 구하고, 나선날개와 날개끝판에서 동시에 법선방향 비침투조건을 만족시킴으로써 섭동 속도 포텐셜을 구하였다. Kutta조건은 반복작업을 통해 나선날개와 날개끝판의 뒷날에서 압력점프가 없어지도록 함으로써 만족시켰다. 예제계산을 통하여 날개끝판이 나선날개의 날개끝 부근의 하중을 증가시킴을 보였고, 동시에 날개끝판의 뒷날에 걸쳐 후연 보오텍스를 분산시킴으로써 강력한 날개끝 보오텍스의 형성을 피할 수 있음을 확인하였다. EPP의 성능을 추정한 결과는 실험결과와 좋은 일치를 보인다. 에너지절약 추진장치로 채택될 수 있는 EPP의 설계 및 해석을 위하여 본 연구에서 확립된 방법이 적용가능하리라 판단된다.

• Structural Engineering and Mechanics
• /
• 제78권5호
• /
• pp.585-597
• /
• 2021

This paper presents a comparative study of analytical method, finite element method (FEM) and Multilayer Perceptron (MLP) for analysis of a contact problem. The problem consists of a functionally graded (FG) layer resting on a half plane and pressed with distributed load from the top. Firstly, analytical solution of the problem is obtained by using theory of elasticity and integral transform techniques. The problem is reduced a system of integral equation in which the contact pressure are unknown functions. The numerical solution of the integral equation was carried out with Gauss-Jacobi integration formulation. Secondly, finite element model of the problem is constituted using ANSYS software and the two-dimensional analysis of the problem is carried out. The results show that contact areas and the contact stresses obtained from FEM provide boundary conditions of the problem as well as analytical results. Thirdly, the contact problem has been extended based on the MLP. The MLP with three-layer was used to calculate the contact distances. Material properties and loading states were created by giving examples of different values were used at the training and test stages of MLP. Program code was rewritten in C++. As a result, average deviation values such as 0.375 and 1.465 was obtained for FEM and MLP respectively. The contact areas and contact stresses obtained from FEM and MLP are very close to results obtained from analytical method. Finally, this study provides evidence that there is a good agreement between three methods and the stiffness parameters has an important effect on the contact stresses and contact areas.

• 정보보호학회논문지
• /
• 제32권3호
• /
• pp.555-564
• /
• 2022

최근 사이버 공격은 지능적이고 고도화된 악성코드를 활용한 해킹 기법을 활용하여 재택근무 및 원격의료, 자동산업설비를 공격하고 있어서 피해 규모가 커지고 있다. 안티바이러스와 같은 전통적인 정보보호체계는 시그니처 패턴 기반의 알려진 악성 URL을 탐지하는 방식이어서 알려지지 않은 악성 URL을 탐지할 수 없다. 그리고 종래의 정적 분석 기반의 악성 URL 분석 방식은 동적 로드와 암호화 공격에 취약하다. 본 연구에서는 악성 URL 데이터를 동적으로 학습하여 효율적으로 악성 URL 탐지하는 기법을 제안한다. 제안한 탐지 기법에서는 머신러닝 기반의 특징 선택 알고리즘을 사용해 악성 코드를 분류했고, 가중 유클리드 거리(Weighted Euclidean Distance, WED)를 활용하여 사전처리를 진행한 후 난독화 요소를 제거하여 정확도를 개선한다. 실험 결과에 따르면 본 연구에서 제안한 머신러닝 기반 악성 URL 탐지 기법은 종래의 방법 대비 2.82% 향상된 89.17%의 정확도를 보인다.

• Steel and Composite Structures
• /
• 제41권5호
• /
• pp.697-711
• /
• 2021

In this work, a simple quasi 3-D parabolic shear deformation theory is developed to examine the bending response of antisymmetric cross-ply laminated composite plates under different types of mechanical loading. The main feature of this theory is that, in addition to including the transverse shear deformation and thickness stretching effects, it has only five-unknown variables in the displacement field modeling like Mindlin's theory (FSDT), yet satisfies the zero shear stress conditions on the top and bottom surfaces of the plate without requiring a shear correction factor. The static version of principle of virtual work was employed to derive the governing equations, while the bending problem for simply supported antisymmetric cross-ply laminated plates was solved by a Navier-type closed-form solution procedure. The adequacy of the proposed model is handled by considering the impact of side-to-thickness ratio on bending response of plate through several illustrative examples. Comparison of the obtained numerical results with the other shear deformation theories leads to the conclusion that the present model is more accurate and efficient in predicting the displacements and stresses of laminated composite plates.

• 한국빅데이터학회지
• /
• 제7권2호
• /
• pp.103-111
• /
• 2022

감염병 대응과 관련된 기관, 조직, 사이트 등의 다수 운영되고 있으나 코로나-19와 같은 팬더믹 상황이 수년간 지속됨에 따라 초기양상과 현재 양상의 수많은 변화가 있으며 이에 따른 정책과 대응체계도 진화하고 있다. 이에 따른 지역별 격차가 발생하고 정책에 대한 신뢰와 불신, 이행도에 따른 여러 가지 문제들이 산재해 있다. 따라서 본 연구에서는 정보전염이 포함된 소셜 데이터를 분석하는 과정에서 루머가 포함된 데이터를 수집하는 과정에서 팩트 체크가 되는 언론 매체와 다르게 정확한 출처를 알 수 없는 부정확한 정보들이 포함되는 주요 소셜 미디어 플랫폼 중의 하나인 트위터 데이터를 수집하여 사실과 무관한 내용을 사전 차단하는 시스템을 개발했다. 비정형데이터인 소셜데이터를 기반으로 감염병 위협을 자동 감지할 수 있는 알고리즘을 개발하여 감염병 위기 대응과 관련된 객관적인 근거를 창출함으로써 관련 분야 국제경쟁력을 공고히 하고자 한다.

• 대한핵의학회지
• /
• 제7권2호
• /
• pp.1-12
• /
• 1973

The most commonly used methods for determining thyroxine binding globulin(TBG) concentration as the total thyroxine-binding capacity utilize electrophoretic seperation of serum. Although technically simple, the electrophoretic method is time consuming and is limited in the number of samples which can be run in a single assay. The author presented a single $T_4$ load ion exchange resin method as an approach to simplify the technique as with clinical practicability and results were analyzed. For construction of the standard curves, serum mixtures were diluted with barbital buffer.which effectively blocked $T_4$-binding to TBPA. For each serum dilution, a constant amount of $T_4-^{125}I$ and increments of unlabelled $T_4$ were added. After incubation in water bath, resin beads were dispensed to the samples which binded all $T_4$ not bound to TBG. The radioactivity in the supernatant was counted in the gamma scintillation counter. Each standard curve was plotted from the percent counts in the supernatant and total $T_4$ in each tube. Unknown samples were diluted to 1:40 and ran at a single $T_4$ loading concentration, and the TBG capacity of the samples was able to be read on the standard isobars. The following results were obtained. 1) Mean and standard deviation for TBG capacity in normal population was $28.6{\pm}5.09{\mu}g\;T_4/100ml$. 2) $24.9{\pm}3.87{\mu}g\;T_4/100ml$ in hyperthyroidism showed low TBG capacity comparing to normal population.(p<0.025) 3) $31.0{\pm}2.40{\mu}g\;T_4/100ml$ in hypothyroidism showed high TBG capacity tendency comparing to normal population. 4) Reversed correlationship existed between TBG capacity and $T_3$ resin uptake(r=-0.624), TBG capacity and serum $T_4$ value (r=-0.859), and TBG capacity and free thyroxine index(r=-0.623). The author assumes that this method of assay is considerably simpler in instrumentation and technique than any other assays traditionally being used, and seems to be more practical for routine clinical laboratory use.

• 대한치과보철학회지
• /
• 제39권6호
• /
• pp.659-681
• /
• 2001

Platelet-rich plasma(PRP) has been known to increase the rate and degree of bone formation by virtue of growth factors in concentrated platelets. Although its great healing effect on bone defect or pre-implantation site preparation in conjunction with bone substitute has been reported, the effect associated with implant is unknown. The purpose of this study was to investigate the effect of PRP on rapid osseointegration of endosseous dental implants in the rabbit tibiae. Twenty two adult female New Zealand white rabbits, weighing approximately 2.7-3.3kg, were used for this study. Twelve of the 22 animals were used for histomorphometric analysis and ten of the 22 were for removal torque test. Each animal received two implants in each tibia (two treated with PRP and two as control) and was given fluorochrome intramuscularly. For histomorphometric analysis, rabbits were divided into four groups according to the healing period. At 1 week, 2 weeks, 4 weeks and 8 weeks postoperatively, each three animals were sacrificed serially and the amount and rate of bone formation around dental implant were examined on the undecalcified sections under fluorescent microscope, polarized microscope and light microscope connected to a personal computer equipped with image analysis system. For removal torque test, rabbits were divided into two groups and removal torque tests were performed at 4 weeks, 10 weeks after implant placement. In total, 88 screw shaped, commercially pure titanium implants (Neoplant, Neobiotech, Seoul, Korea) were used in this study. Labeling pattern reflected differences of two groups in bone formation rate at each period. Histomorphometrically, PRP group showed significantly higher bone volume within threads compared to control group at 2 weeks ($70.30{\pm}4.96%$ vs. $50.68{\pm}6.33%$; P < .01) and 4 weeks ($82.59{\pm}5.94%$ vs. $72.94{\pm}4.57%$; P < .05 ). PRP group at 1, 2 and 4 weeks revealed similar degree of bone volume formation comparable to control group at 2, 4 and 8 weeks, respectively. On the other hand, while PRP group showed higher bone-implant contact ($47.37{\pm}8.09%$) than control group ($33.16{\pm}13.47%$) at 2 weeks, there were no significant differences between PRP group and control group for any experimental period. Removal torque values also showed no significant differences between PRP group and control group at any experimental period (P > .05). These findings imply that PRP could induce rapid, more bone formation around implant during early healing period and get faster secondary stability for reducing healing period, though it has not induced bone maturation enough to resist functional loading.

• 콘크리트학회논문집
• /
• 제24권2호
• /
• pp.205-214
• /
• 2012

균열폭은 콘크리트 구조물의 사용성을 평가하는 측면에서는 매우 중요하다. 균열폭을 일정값 이하로 유지할 수 있다면 낮은 투수성을 유지할 수 있으므로 콘크리트의 피복만으로도 염소이온에 의한 부식을 방지할 수 있다. 따라서 내구적인 구조물을 설계하기 위해서는 인장 균열에 대한 충분한 정보가 필요하다. 그러나 균열폭을 정확하게 계측하는 데는 몇 가지 어려움이 있다. 먼저, 균열의 생성 위치를 미리 알기 어렵다. 또한 변형률 게이지 등 탄성영역에서 사용되는 게이지는 사용할 수 없다. 이러한 문제를 극복하기 위해서 화상상관기법 및 고해상도 CCD를 이용한 균열 및 변위계측 시스템을 개발하였다. 이를 통해서 임의의 위치에 생성되는 인장균열폭을 측정하는 방법을 제시하였다. 변위계측 정밀도 검증을 실시한 결과 평균오차는 0.069 픽셀, 표준편차는 0.050 픽셀이었다. UHPC를 이용하여 직접인장 실험을 수행하였다. 노치 구역과 비노치 구역에서 각각 균열을 측정하는 방법을 제시하고, 하중단계에 따라서 클립인 게이지의 결과와 비교하여 설명하였다. 시편의 전면에서 변위벡터를 구성하고, 등변위도 및 변형률도를 작성하였다. 다양한 실험에 적용할 수 있는 범용의 기법이기 때문에 임의의 균열폭 혹은 전면변위 측정 분야에서 많이 활용될 수 있을 것이다.