• Journal of Ecology and Environment
• /
• v.30 no.3
• /
• pp.237-244
• /
• 2007

We investigated the foraging habitat preferences of herons and egrets in an agricultural area in Asan city, Chungcheongnam-do, Korea. In the study area, rice fields were the most abundant habitat type (86.8%) and total suitable feeding habitat was greater in the northern area (59.0%) than the southern area (22.5%) of the colony. Most feeding herons and egrets were located in the northern area of the colony. The number of feeding individuals in a given area was related to the available feeding area (Pearson correlation, r=0.773, p<0.001 for field habitats; r=0.901, p<0.001 for freshwater habitats). Feeding habitat preferences differed among species. Grey herons (Ardea cinerea), great egrets (Egretta alba), and black-crowned night herons (Nycticorax nycticorax) used reservoirs and ditches. However, intermediate egrets (E. intermedia) and cattle egrets (Bubulcus ibis) were dependent on rice fields. The little egret (E. garzetta) was a habitat generalist using all types of habitats. The two largest species, grey herons and great egrets, fed at deeper site than little egrets and foraged in deeper sites in reservoirs than in ditches (${\chi}^2-test,\;{\chi}^2{_3}=26.6$ and p<0.001 for grey herons, ${\chi}^2{_3}=17.5$ and p<0.001 for great egrets). All species displayed seasonal changes in feeding habitat use and these changes were related with changes in availability of feeding habitats.

• Journal of Environmental Science International
• /
• v.1 no.1
• /
• pp.35-43
• /
• 1992

Handling the emergency problems such as Chemobyl accident require real time prediction of pollutants dispersion. One-point real time sounding at pollutant source and simple model including turbulent-radiation process are very important to predict dispersion at real time. The stability categories obtained by one-dimensional numerical model (including PBL dynamics and radiative process) are good agreement with observational data (Golder, 1972). Therefore, the meteorological parameters (thermal, moisture and momentum fluxes; sensible and latent heat; Monin-Obukhov length and bulk Richardson number; vertical diffusion coefficient and TKE; mixing height) calculated by this model will be useful to understand the structure of stable boundary layer and to handling the emergency problems such as dangerous gasses accident. Especially, this simple model has strong merit for practical dispersion models which require turbulence process but does not takes long time to real predictions. According to the results of this model, the urban area has stronger vertical dispersion and weaker horizontal dispersion than rural area during daytime in summer season. The maximum stability class of urban area and rural area are "A" and "B" at 14 LST, respectively. After 20 LST, both urban and rural area have weak vertical dispersion, but they have strong horizontal dispersion. Generally, the urban area have larger radius of horizontal dispersion than rural area. Considering the resolution and time consuming problems of three dimensional grid model, one-dimensional model with one-point real sounding have strong merit for practical dispersion model.al dispersion model.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1018-1020
• /
• 2003

The costal area where takes up over 32% in domestic teritory is considered as very importantly because it has not only economic facilities such as harbor and an industrial complex but also recreation facilities. Moreover, the tidal flat area has been used as culture ponds and salt farms because this area is occupied by various oceanic species. Also, the tidal flat area has played an important role to purify ocean pollution and maintain an ecosystem. However, the costal ecosystem has seriously threatened by domestic reclamation projects and a large-scale tide embankment during recent 10 years in Korea. This serious problem results in loosing 34%(810$km^2$) of the entire domestic costal area. In this paper, the micro-landform in the tidal flat area, which is called as Garolim bay in Korea, is classified by using Landsat TM images also verified through a filed report. Through the result of this, the tidal flat area is expected to manage efficiently especially through analyzing sediment environment and characteristic of grain size by using satellite images.

• Current Photovoltaic Research
• /
• v.10 no.4
• /
• pp.111-115
• /
• 2022

For the high efficiency of the photovoltaic module, a high-output solar cell, which is the basis of photovoltaic power generation, is required. As the light receiving area of the solar cell increases, the light receiving area of the photovoltaic module also increases. Accordingly, recent trend is to use large-area solar cells such as M6 and M8 instead of M2-based solar cells for manufacturing the photovoltaic module and a study on the mechanical stiffness of the module with increased size is required. In this study, a mechanical load test corresponding to IEC-61215 was performed among the reliability tests of large-area photovoltaic modules. In order to confirm the degree to which the mechanical load test affects the photovoltaic module, the output and EL images were checked by sequentially increasing the pressure by 600 Pa at a pressure of 2400 Pa. Also, factors such as output and efficiency of large-area photovoltaic modules were verified through mechanical load testing of actual large-area photovoltaic modules and the rate of change was very small at 1%.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.1
• /
• pp.104-126
• /
• 1999

The purpose of this study was to compare and evaluate the stress distribution and displacement developed in the abutment teeth and residual ridge area by madibular unilateral distal extension removable partial denture with 2 different retainer designs. The retainers on right and left canine and right 2nd molar were Alters clasp in one model and telescopic crown in the other model. The stress distribution of abutment teeth and residual ridge area on two model were compared and analyzed with 3-dimensional finite element method. 150N and 400N forces were applied vertically, 30 degree and horizontally on the central fossa area of left 1st molar of the removable partial denture, and then stress distribution patterns were analyzed and compared. The results were as follows 1. As the magnitude and angulation of applied force were increased, the magnitude of stress on the right and central residual ridge area and the right canine of the telescopic type increased and comparing to those of the Alters clasp type. 2. As the magnitude and angulation of applied force were increased, the mesial direction of displacement on the right residual ridge area and the right tooth of the telescopic type increased and the distal direction of displacement on left residual ridge area and the left canine increased comparing to those of Akers clasp type. 3. As the vertical force was applied, the distal direction of the displacement of the right tooth were greater and that of the left canine was smaller and the upward displacement of the right canine was greater in telescopic partial denture than those of Akers clasp type. 4. As the 30 degree force was applied, the mesial direction of the displacement of the right tooth were greater and the distal direction of the displacement of the left canine was smaller and the upward displacement of the right canine was greater in telescopic partial denture than those of Akers clasp type. In the horizontal force the results were same in right area tooth but the distal direction of displacement was greater in left canine. 5. In both removable partial dentures, as the magnitude and degree of force were increased, the stress and displacement were increased. The compressive force was dominative than the ten sile force. 6. In both removable partial dentures, the magnitude of stress was greater on mucosal tissue area than that of the alveolar bone area on distal extension residual ridge area but the result was reversed on anterior residual ridge area. The displacement was always greater on mucosal tissue area than that of alveolar bone area.

• Journal of Korean Neurosurgical Society
• /
• v.54 no.3
• /
• pp.225-231
• /
• 2013

Objective : Spinal dysraphism defects span wide spectrum. Wound dehiscence is a common postoperative complication, and is a challenge in the current management of cerebrospinal fluid (CSF) leaks and wound healing. The purpose of this study is to evaluate the risks of CSF-related morbidity in the surgical treatment of spinal dysraphism. Methods : Ten patients with spinal dysraphism were included in this retrospective study. The median age of the cohort was 4.8 months. To assess the risk of CSF morbidity, we measured the skin lesion area and the percentage of the skin lesion area relative to the back surface for each patient. We then analyzed the relationship between morbidity and the measured skin lesion area or related factors. Results : The overall median skin lesion area was 36.2 $cm^2$ (n=10). The percentage of the skin lesion area relative to the back surface ranged from 0.6% to 18.1%. During surgical reconstruction, 4 patients required subsequent operations to repair CSF morbidity. The comparison of the mean area of skin lesions between the CSF morbidity group and the non-CSF morbidity group was statistically significant (average volume skin lesion of $64.4{\pm}32.5cm^2$ versus $27.7{\pm}27.8cm^2$, p<0.05). CSF morbidity tended to occur either when the skin lesion area was up to 44.2 $cm^2$ or there was preexisting fibrosis before revision with an accompanying broad-based dural defect. Conclusion : Measuring the lesion area, including the skin, dura, and related surgical parameters, offers useful information for predicting wound challenges and selecting appropriate reconstructive surgery methods.

• Diabetes and Metabolism Journal
• /
• v.42 no.6
• /
• pp.488-495
• /
• 2018

Background: Skeletal muscle plays a major role in glucose metabolism. We investigated the association between thigh muscle mass, insulin resistance, and incident type 2 diabetes mellitus (T2DM) risk. In addition, we examined the role of body mass index (BMI) as a potential effect modifier in this association. Methods: This prospective study included 399 Japanese Americans without diabetes (mean age 51.6 years) who at baseline had an estimation of thigh muscle mass by computed tomography and at baseline and after 10 years of follow-up a 75-g oral glucose tolerance test and determination of homeostasis model assessment of insulin resistance (HOMA-IR). We fit regression models to examine the association between thigh muscle area and incidence of T2DM and change in HOMA-IR, both measured over 10 years. Results: Thigh muscle area was inversely associated with future HOMA-IR after adjustment for age, sex, BMI, HOMA-IR, fasting plasma glucose, total abdominal fat area, and thigh subcutaneous fat area at baseline (P=0.033). The 10-year cumulative incidence of T2DM was 22.1%. A statistically significant interaction between thigh muscle area and BMI was observed, i.e., greater thigh muscle area was associated with lower risk of incident T2DM for subjects at lower levels of BMI, but this association diminished at higher BMI levels. Conclusion: Thigh muscle mass area was inversely associated with future insulin resistance. Greater thigh muscle area predicts a lower risk of incident T2DM for leaner Japanese Americans.

• Restorative Dentistry and Endodontics
• /
• v.46 no.2
• /
• pp.28.1-28.10
• /
• 2021

Objectives: This study evaluated the effect of repeated uses and autoclaving in the instrumented area, fracture resistance, and time of instrumentation of thermally treated nickel-titanium reciprocating systems. Materials and Methods: Two hundred simulated canals were instrumented using Reciproc Blue and WaveOne Gold. Each file was used up to 10 times or until fracture. The instrumented area was measured in pre- and post-operative images, using ImageJ software. Kaplan-Meier survival analysis evaluated the number of uses of instruments before fracture. Instrumented area and time of instrumentation were analyzed by Mann-Whitney U test and Kruskal-Wallis. Correlations among the number of uses and instrumented area were measured. The level of statistical significance was set at p < 0.05. Results: Reciproc Blue presented a higher estimated number of uses in comparison with WaveOne Gold (p = 0.026), but autoclaving did not affect the resistance to fracture of instruments (p > 0.05). The instrumented area was different among the evaluated groups (p = 0.039), and the instrumented area along the uses of both tested instruments was reduced. With the time of instrumentation, there was also a significant difference among the evaluated groups; the groups without sterilization cycles were faster, in comparison to those submitted to autoclaving (p = 0.010). Conclusions: Reciproc Blue was more resistant than WaveOne Gold, suffering later fracture. Additionally, the sterilization cycles did not influence the estimated number of uses of thermally treated reciprocating instruments, but the instrumented area of root canals was reduced along with the repeated uses of both instruments.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.3
• /
• pp.1-9
• /
• 2001

The purpose of this study was to evaluate the burning impacts of the surface and crown fire occured in yongsan-ri meongsok-myun of chinju-city, Gyeongnam. Environmental influences like surface runoff and soil erosion changes were investigated by comparisons analysis between burned and unburned area about some initial effects after fire. The results obtained from this study were as followed; 1. The average amount of surface runoff in burned area was more 1.7 times than in unburned area. But it was gradually tend to decrease in burned area as times passed. 2. Factors significantly correlated to amount of surface runoff in burned area shown in order to unit rainfall, accumulated rainfall and sand content, as 0.9466 of multiple correlation coefficient, where as the factors in unburned area were unit rainfall, soil erosion, bulk density and soil hardness, as 0.9738 of multiple correlation coefficient. 3. The average amount of soil erosion in burned area was more 11.2 times than in unburned area. But it was gradually tend to decrease in burned area as times passed. 4. Factors significantly correlated to amount of soil erosion in burned area were surface runoff and unit rainfall, as 0.6305 of multiple correlation coefficient. The factors in unburned area shown in order to surface runoff, sand content, bulk density and unit rainfall, as 0.7879 of multiple correlation coefficient.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.4
• /
• pp.27-35
• /
• 2019

Purpose: As the improvement in quality of medical environment and the spatial consideration for the prevention of infection in the hospital have become increasingly important in the recent years, specific and practical planning for air conditioning room's area has become a major issue accordingly. However, the air conditioning room tends to be discussed focusing on technical factors such as air conditioning systems that are irrelevant to building plans, while discussions of most departments related to the medical functions have actively taken placed. Therefore, this study aims to investigate the factors influencing the planning for the air conditioning room area, and through subsequent analysis of the area of the air conditioning room, to propose a way to improve effective planning for the air conditioning room area. Methods: This study examines the case hospitals that fall into two types: each floor supply system and concentrated supply system, and compares and analyzes the air conditioning room area-related factors and the characteristics of changes in the interior of air conditioning room before and after remodeling through air conditioning floor plan of those case hospitals. Results: The air conditioning room can be classified into the net area of the functional space such as duct passages, and the public area such as aisle space, and of those the public area is an important factor in calculating the area of the air conditioning room. The public area of the air-conditioning room should not be planned considering only the spaces for mobile passage or maintenance activities, but should be planned taking into account internal changes such as expansion and replacement of equipment in the future from the beginning. Implications: When planning a medical facility, it is used as basic data for the planning of the air conditioning room area, which is a significant fixed factor in the initial setting.