• 한국입자에어로졸학회지
• /
• 제5권4호
• /
• pp.189-197
• /
• 2009

Wet-type particulate removal system is employed in most of ironmaking processes. These de-dusting systems require additional downstream aggregates for treatment of water and for drying of the collected slurry. Thus dried slurry can be pressed in shape of briquettes and recycled in the steelmaking process. Different from the wet-type, the dry-type particulate removal systems generate no slurry. A high-temperature, high-pressure de-dusting system with inertial inlet was developed. The target application of this system was to remove particulate matter generated from the novel ironmaking process and other steelmaking processes. In this study we conducted tests with this newly developed system to evaluate the performance of the silica-carbide (SiC) ceramic filters. In addition, for purpose of comparison, we also conducted tests with a unit which has conventional direct inlet. Fe-Particles collected from the novel ironmaking process were used in our tests as test dusts. The temperature and the pressure were kept constant at their respective values $800^{\circ}C$ and $3kg_f/cm^2$.

• 한국압력기기공학회 논문집
• /
• 제11권2호
• /
• pp.13-19
• /
• 2015

Steam generator is one of the most important component of nuclear power plant, and it's integrity and reliability are to be assured to high level by pre-service inspection and in-service inspection. To improve the reliability of steam generator heat exchanger tubes and to secure the management of nuclear power plant safely, KHNP CRI recently has developed eddy current testing system for steam generator. KHNP CRI have performed a series of experimental verification and field application to confirm the performance of the developed ECT system in accordance with ASME Code requirements. The ECT system consists of a remote data acquisition unit, an ECT signal acquisition and analysis software, a water chamber robot controller and a probe push-puller. In this paper, we will details of the developed ECT system and the software and their experimental performance. And also we will report the field applying performance and the issues for further steps.

• 한국지반신소재학회논문집
• /
• 제6권2호
• /
• pp.9-15
• /
• 2007

콘크리트 표면 차수벽형 석괴댐(CRFD)에서의 표층부기초지반은 콘크리트 차수벽을 균등하게 지지할 수 있는 지지력과 사면안정을 위한 소요강도를 확보하여야 하며, 콘크리트 차수벽의 누수시 세립토의 유실을 억제할 수 있는 차수성을 유지하여야 한다. 본 연구에서는 사면부 표층기초지반에 대하여 시험시공을 실시하여 다짐회수에 대한 제체의 변위량과 현장다짐밀도의 변화, 살수량에 따른 함수비 변화 등을 측정하여 효율적인 다짐관리기준을 마련하고자 하였다. 일련의 현장다짐시험결과 CFRD에서의 표층부기초지반은 층별 포설두께 및 다짐회수에 따라 영향 받고 있음을 확인할 수 있었다.

• Biomolecules & Therapeutics
• /
• 제8권2호
• /
• pp.199-205
• /
• 2000

On the inter-order protoplast fusants of Lentinus edodes and Ganoderma lucidum was the antitumor activity test performed and the fusant P22 was selected. The hot water extract of the cultured mycelia of P22 were purified by DEAE-cellulose chromatographya and the resulting purified fraction was designated as P22A. It was found to be a proteoglycan whose molecular weight was 47 kDa. When examined for immunopotentiation activity, P22A increased the number of colony forming unit in the bone marrow stem cells to 3-folds. It also potentiated the secretion of nitric oxide in activated macrophages to 2-folds. In humoral immune response, it increased the activities of the alkaline phosphatase in differentiated B cells to 1.6-folds and the number of plaque forming cells to 1.8-folds. In cellular immune response, it restored the depressed response of delayed type hypersensitivity in tumor bearing mice to normal level. These results suggest that P22A have potential to restore the decreased immune activity of the tumor bearing mice to normal level.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.569-574
• /
• 2008

Recently, the domestic remodeling market is increased in scale. This study is to develop the sanitary piping system which improves quality of life and facility performance when the aged public housing is remodeled. Above all, we found out three standard floor plans in bathrooms of the public housing. And then, the plan and section types of the sanitary piping system were developed for the on-floor piping, a construction cost of each section types was estimated to review the economical fact. Also, the field mock-up test was performed in the type of the pipe shaft with on-floor pit. In result, the developed sanitary piping system was available for the remodeling public housing without a great facility cost. Additionally, the sanitary pipe was replaced easily through the shaft and on-floor fit. And a noise was reduced to a lower unit when the water flowed down.

• 한국기계가공학회지
• /
• 제8권3호
• /
• pp.82-89
• /
• 2009

The purpose of this study is to investigate the actual field application of the linear piston pump for the solid transferring driven by the hydraulic power unit. In this paper, the numerical analysis and performance evaluating experiments were performed. CFX program has been used to obtain the solutions for the problems of three-dimensional, turbulent water flow in the linear piston pump. The velocity and the pressure distributions are obtained using the turbulent $k-\varepsilon$ model. To evaluate the performance of the linear piston pump, the performance test stand and data acquisition system were manufactured. The numerical predictions agree favorably with experimental results within 7% error. Speed of the piston which is satisfied the flow rate 3,000l/min which considers from basic design became 0.33m/s. This paper could be applied to the design of the linear piston pump for the fish transferring.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.531-536
• /
• 2008

This paper presents experimental result of characteristics about Closed circuit Cooling Tower having a rated 2RT. The experimental apparatus has been set-up with a conventional type system. The test section is heat exchangers of cooling tower that consist of different vertical tubes, 15.88mm with 10 rows and columns and 19.05 mm with 8 rows and 12 columns. The main results were summarized as follows : The values of heat and mass transfer coefficients of cooling tower operating with two paths are higher than these with one path. Cooling capacity per unit volume using 15.88mm tubes are higher than 19.05mm tubes.

• 한국초등과학교육학회지:초등과학교육
• /
• 제24권1호
• /
• pp.9-20
• /
• 2005

The purpose of this study was to examine the effect of integrated science inquiry teaming method through literature materials on the learner's science concept formation, inquiry ability, and attitude related to science when it was applied to the unit 'The temperature of atmosphere and winds', 'The journey of water' in the 5th grade, and to find out the effect on science learning according to teaming styles. To study these subjects, 4 classes of 5th grade in J elementary school in Busan were selected. The result of this study were as follows: First, Integrated science inquiry learning method through literature materials was more effective for concept formation than conventional teaching method. In science inquiry ability, there was not significant difference at all between the comparison group and the experimental group. In attitude related to science, the experimental group showed significant difference only in the interest in occupation related to science. The visual modality learners within the experimental group showed significantly higher statistics than the other modality learners in the post-investigation into the science concept and there was significant difference between the visual and the kinesthetic modality learners in the result of post-test on science inquiry ability.

• 전기학회논문지
• /
• 제64권12호
• /
• pp.1666-1672
• /
• 2015

Small islands are quite adequate places where microgrid system with renewable sources can replace diesel engines as operation costs of diesel engine in most small islands are very high. To get the large amount of renewable energy, the microgrid system has very large capacity of renewable sources. The system with large capacity of renewable sources can meet the case when supplied energy is greater than the load and the fluctuation of source output is very large. The battery energy storage system can be a solution to stabilize the system with large capacity of renewable sources. In this case, BESS can be utilized as a master source for the synchronous operation of all sources including diesel engine, wind turbine and PV. The diesel generators can be used as a backup in case the BESS SOC goes below a certain level. In this paper, we suggest a novel unit commitment of diesel generators and operation schedule of pump for water supply service with the information of wind forecast, PV forecast, and load forecast. The proposed methods has been implemented and tested at the test bed in Gasa-Island.

• Restorative Dentistry and Endodontics
• /
• 제25권2호
• /
• pp.219-224
• /
• 2000

The purpose of this study is for evaluating the effect of MS Coat desensitizing agent in clinical situation. In this study total 60 teeth of 30 patients who is feeling hypersensitivity after periodontal surgery were treated with MS Coat desensitizing agent, and 20 teeth with saline solution for placebo effects and evaluated. All teeth were cleaned with rubber cup and pumice, after then the antibacterial agent was applied for 20 seconds and simply isolated using cotton roll Desensitizing agent was applied with a specific instrument in the manufacturers package by abrading motion for 10 seconds and re-done 8 times. Tactile stimulus with sharp explorer, air stimulus with syringe of dental unit, $7^{\circ}C$ cold water stimulus using micropipette applicator was done to evaluate hypersensitivity before apply test agent, immediate after application, 1 week after, and 3 month after application. The degree of hypersensitivity was recorded using 100mm Visual Analogue Scale and compared between group and evaluation times. From this clinical study sensitivity to the stimulus was significantly induced in both groups and MS Coat made a significant reduction in VAS score than placebo group did(p<.01). The results of this study could demonstrate that MS Coat desensitizing agent can use effectively to heat dentinal hypersensitivity.