• Journal of the Korean Society of Costume
• /
• v.55 no.2 s.92
• /
• pp.116-128
• /
• 2005

The aim of this study is to understand problems with both fit and sizing system of gloves by analyzing the glove production industries with an emphasis on the sizing system, production measurement system, and general marking situation. Also, to suggest the basic raw materials for improving sizing system for gloves, actual glove control sizes were compared to the anthropometric data of the previous study Fifteen domestic production companies were participated in this study-Domestic glove production companies established their own sizing system by copying inter-national brand's glove sizing system or by their experience. The Korean Standard of gloves and the 1997 Korean Standard Anthropometrics Measurement for producing glove patterns are not considered because of its discordance with the reality of the required measurements. Domestic glove production companies used different size designation and labeling system. Size measurement unit also showed difference among the glove production companies. Some companies used 'cm', some used 'mm', some used 'inch' for the measurement unit. In general, companies produced 5 to 4 sizes in one design of glove and the production was the highest in M and L size. In 9 out of 15 companies preferred control size as hand length and hand circumference. For reference size, most of the companies preferred finger circumference, finger length, palm length, hand breadth, crotch height, and hand thickness. Actual glove sizes were compared to the anthropometric data of the previous study. The results indicated that most of the measurements of actual glove sizes were significantly larger than the anthropometric data.

• Journal of Environmental Health Sciences
• /
• v.41 no.6
• /
• pp.438-448
• /
• 2015

Objectives: This study was performed to examine the effects of storage time and temperature and their interaction on the hygienic quality parameters of shell eggs. Methods: Eggs from 40-week-old Hy-Line Brown hens were sampled immediately after being laid and subjected to storage periods of four weeks at a refrigerated temperature ($4-5^{\circ}C$) or room temperature ($13.0-19.7^{\circ}C$). Interior/exterior qualities were examined every one week. Results: Weight loss was 2.4-3.1%. The initial specific gravity of the eggs was maintained until one week at both temperatures. Air cell size exceeded 4 mm when stored for one week at room temperature, and two weeks at refrigerated temperature. Albumen index and Haugh unit were significantly decreased at both temperatures after one week (p<0.001). Rapidly increased pH of the albumen with one week of storage was observed, regardless of temperature (p<0.001). Extension of the storage for up to four weeks at room temperature resulted in remarkable deterioration of eggshell quality and instrumental color as redness (a). Air cell size, albumen and yolk indices, Haugh unit, pH of albumen and yolk were found to be influenced by storage time and temperature (p<0.001). Interaction effects between storage time and temperature were also significant for air cell size, pH of albumen and yolk (p<0.001). Conclusion: The results suggest that air cell size and pH of albumen and yolk were important parameters influenced by storage time and temperature in shell eggs. Storage time was more influential for air cell size, and temperature for the pH of yolk. Both variables almost equally influenced the pH of albumen.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.10
• /
• pp.1269-1279
• /
• 1995

A mobile robot in a nuclear power plant is usually needed to equip the ability of going up and down stairs for a some kind of inspection. For this purpose, it is necessary for the mobile robot to figure out the size of stairs laid on a navigation path to gurantee robot's moving freely. In this paper, to measure the size of stairs existing in front of a mobile robot we designed the stair size recognition unit which can measure the stair's height and width using an ultrasonic sensor and/or a CCD camera. Also to obtain higher reliability of ultrasonic sensing data we proposed the horizontal sensing method. On the assupmtions that the mobile robot generates a trajectory while ascending stairs, we simulated it on a IBM compatible computer. The result showed that the suggested method satisfied our purpose. In a stair size estimation, the detected stair's height error was about .+-.3mm, and width was about .+-.5mm.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.49-54
• /
• 2006

The purpose of this study was to determine the effect of expansion joint spacing (slab size) on the life cycle costs of owning Portland Cement Concrete (PCC) airfield pavements. Previous research has shown that slab size has a statistically significant impact on pavement performance. A probabilistic life cycle cost analysis was performed to determine if the effect of slab size on pavement performance would affect the total cost of ownership of PCC pavements. Data from 48 Pavement Condition Index (PCI) inspections of military and civilian airfields were used to develop probability-of-distress-by-condition curves, which were then used to develop probabilistic cost-of-repair-by-condition curves. A present worth life cycle cost analysis was then performed for various slab sizes, using construction costs, rehabilitation costs, and maintenance costs. Maintenance costs were determined by assuming a condition deterioration rate appropriate for each slab size and applying the cost-by-condition curves. The probabilistic cost-of-repair-by-condition curves indicated that smaller slabs are more expensive to repair on a unit cost basis. Life cycle cost analysis showed that larger slabs have a higher total cost of ownership than smaller slabs due to a faster rate of deterioration.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.2
• /
• pp.157-165
• /
• 1999

Grain size of steels is one of the most important parameters which influence yield strength and fracture toughness. Ultrasonic wave propagating in polycrystalline materials is mostly attenuated by scattering at grain boundary. Effect of ultrasonic attenuation on average ferrite grain size of carbon steels with tensile strength $40{\sim}60kgf/mm^2$ consisting of multi phases such as ferrite + pearlite and ferrite + pearlite + bainite was evaluated. The attenuation of these steels rapidly increased with average ferrite grain diameter. Average ferrite grain diameter ($D_{av}$, ${\mu}m$) could be expressed as $1.79+22.97*a^{1/2.03}$, where a is attenuation with unit of nepers/cm. From this study, it was confirmed that nondestructive ultrasonic method could be used in measuring average ferrite grain size indirectly.

• Journal of Ecology and Environment
• /
• v.36 no.1
• /
• pp.11-17
• /
• 2013

The life cycle of butterflies is closely related to the growth of food plants and, through a prolonged coevolutionary process, has undergone an ecological adaptation. So, it is important that control the egg-laying number and place to secure enough food plant by female adult to guarantee the survival of the larvae. To study whether oviposition control of the Luehdorfia puziloi takes into greater consideration food plant leaf biomass or leaf abundance, correlation among the egg cluster size, the leaf size, and the number of leaves around egg clusters was investigated. According to the results, the egg clusters size exhibited positive correlation with the leaf size of food plants on which eggs had been laid but did not do so with the number of surrounding leaves. In addition, the number of egg clusters laid exhibited positive correlation with the number of surrounding food plant leaves but not with the leaf size on which eggs had been laid. Consequently, for the Luehdorfia puziloi, the females' recognition of the leaf size seems to be the most important factor in the egg cluster size, and the number of egg clusters had positive correlation with food plant density per unit area.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.227-238
• /
• 2006

Line density index(LDI) was developed to quantify a densely isothermal line rate as standard index in the ocean environment. Theoretical background on the LDI development process restricting index range 0 to 100 was described. And validation test was done for the LDI application condition that total line length is not greater than 1/10 of unit area. NOAA SST(Sea Surface Temperature) data were used for the experimental application of LDI in the South Sea of Korea. Using GIS, $0.1^{\circ}C$ isothermal lines were linearized as vector data form SST raster data, and unit area were built as polygon data. For the LDI calculation, spatial overlapping(line in polygon) was implemented. To analyze the effect of unit area size for the LDI distribution, two cases of unit area size were designed and descriptive statistics was calculated including performing normality test. The results showed no change of LDI's essential characteristics such as mean and normality except for the range of value, variance and standard deviation. Accordingly, it was found that complex structure of thermal front and even smaller scale of front width than unit area size could influence on the LDI distribution. Also, correlation analysis performed between LDI and difference of temperature(${\Delta}T^{\circ}C$), and horizontal thermal gradient(${\Delta}T^{\circ}C/km$) on the front was obtained from linear regression model. This obtained value was compared with the results from previous researches. Newly developed LDI can be used to compare the thermal front regions changing spatio-temporally in the ocean environment using absolute index value. It is considered to be significant to analyze the relationship between thermal front and marine environment or front and marine organisms in a quantitative approach described in this study.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.90-95
• /
• 2009

This paper presents a new lithium ion unit-cell and pack battery by using a new formulation ratio of material. The three types of formulation ratio for the unit-cell were used. The life cycle and basic properties of the lithium ion unit-cell$({\Psi}18{\times}65(mm))$ about one of them were acquired by the charge-discharge experiment. The nominal voltage, nominal capacity and cycle life output of the lithium ion unit-cell is respectively 3.7V, 2.4Ah, and above 500cycle. Pack type lithium ion battery has the size of $29.5{\times}73.5{\times}115(mm)$ and the weight of 300g. As the results, the weight and bulk of lithium ion battery used to a safety lamp were decreased to 1/4 and 1/7. In addition, the comparison of the new lithium ion battery and lead storge battery for confirming the effectiveness of the new lithium ion battery have been performed.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.05a
• /
• pp.227-230
• /
• 2007

The expansion of open education and the 7th revision of educational curriculum have brought big changes in the school facilities. In response to the integrated curriculum for the first and second grades of elementary school, various plans, such as open classroom, expanded classroom size, and the installation of multi-purpose space, have been attempted. However, such plans have appeared in the form of an open classroom--a uniform spatial composition. As a result, a plan for unit learning space to support the educational curriculum and activities for low grade levels is still insufficient. In the case of advanced countries, a lot of studies on space are being actively conducted to develop the creativity of children and to facilitate free-style learning, and such space is actually applied to a real educational environment. Therefore, this study will analyze the spatial composition of unit learning space for low grade level elementary schools in Korea. From the cases of advanced countries, a more concrete proposal will be suggested to diversify unit learning space for low grade levels.

• Journal of Environmental Science International
• /
• v.22 no.10
• /
• pp.1345-1351
• /
• 2013

Leaf characteristics of two representative deciduous-tree species in Korean peninsula were compared to assess directional ridge effect on leaf traits of both species. Leaf mass per unit area (LMA) of Rhododendron schilippenbachii in south-facing ridge slope was significantly higher than that in north-facing ridge slope, while Quercus mongolica did not change LMA. Leaf mass of Q. mongolica was increased depending on leaf size irrespective of slope. However, leaf mass of R. schilippenbachii changed differently in responding to expansion of leaf area between both slopes resulting from retardation of leaf expansion in south-facing slope. R. schilippenbachii showed higher leaf nitrogen concentration per unit area (LNCA) in south-facing slope than that in north-facing slope, while Q. mongolica indicated no difference in LNCA between southand north-facing slopes. However, both species revealed no significant difference in leaf nitrogen concentration per unit mass (LNCM) between south- and north-facing slopes. LNCA of Q. mongolica was about two times higher than that of R. schilippenbachii. These results indicate that there is a difference in leaf characteristics including leaf thickness and nitrogen allocation between Q. mongolica and R. schilippenbachii, suggesting the difference of plasticity.