• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2127-2137
• /
• 2017

A virtual power plant (VPP) is a system that virtually integrates power resources based on the VPP participating customer (VPC) unit and operates as a power plant. When VPP operators manage resources to maximize their benefits, load reduction instructions may focus on more responsive VPCs, or those producing high profitability, by using VPC resources with high operation efficiency. VPCs may thus encounter imbalance problems during operation. This imbalance in operation time would bring more participation for some VPCs, causing potential degradation of their resources. Such an operation strategy would be not preferable for VPP operators in managing the relationship with VPCs. This issue impedes both continual VPC participation and economical and reliable VPP operation in the long term. An operation algorithm is therefore proposed that considers the operation time of VPC generators for mandatory reduction of power resource consumption. The algorithm is based on constraints of daily and annual operation times when VPP operators of local generators perform capacity-market power transactions. The algorithm maximizes the operator benefit through VPP operations. The algorithm implements a penalty parameter for imbalances in operation times spent by VPC generators in fulfilling their obligations. An evaluation was conducted on VPP operational effects by applying the algorithm to the Korean power market.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.179-180
• /
• 2011

This paper focuses on the Current-Voltage concurrent control method devoted to the multiple LED (light-emitting diode) string driver. Isolated DC to DC converter with cascaded chopping switch is proposed for smart lighting system such as light with sensor or back light unit of display, which need to control the current of parallel connected multiple LED stings and regulate DC voltage for micro controller for brightness control. The proposed circuit regulates the current of parallel connected multiple LED strings and additional DC voltage output simultaneously. To verify the performance, experimental results are presented based on the prototype board. 5V, 1A voltage mode electric load and two LED strings with different forward voltages are used for output loads. 23W output power is achieved and measured efficiency is in the range of 85%-87%

• 자원리싸이클링
• /
• 제15권3호
• /
• pp.30-37
• /
• 2006

최근 실내 공기질에 대한 관심이 집중되고 있으며, 본 연구에서는 자동차용 폐 라디에이터를 재활용하여 진동형 히트 파이프 (pulsating heat pipe : PHP)타입의 환기열 회수기로 제작하고, 그 성능에 대해 평가하였다. 작동유체로는 R-134a를 사용하였으며, 충전율은 내부체적비($\varphi$) 30% 및 40%로 PHP를 제작하였다. PHP의 높은 열전달 성능으로 인해 컴팩트 열교환기로 제작가능하였으며, 기존의 환기열 회수기와 대등한 성능을 보여주었다. 또한 부하변동에 따라 유닛의 개수를 증감할 수 있는 Cassette type일 뿐 아니라, 자동차용 폐 열교환기의 재활용으로 높은 경제성과 효율성이 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1215_1216
• /
• 2009

Most transformer use insulating and cooling fluids derived from petroleum crude oil, but mineral oil is some possibility of environmental pollution and fire with explosion. vegetable oil fluids extracted from seed has superior biodegradation and fire-resistant properties including an exceptionally high fire point enhancing fire safety. In this study, it is aimed at the practicality of substituting natural ester dielectric fluid for mineral oil in liquid insulation system of transformers. As a rise in coil winding temperature has a direct influence on transformer life time, it is important to evaluate the temperature rise of coil winding in vegetable oil in comparison with mineral oil. Three transformers for the test are designed with 10KVA, 13.2KV, one phase unit. The temperature are directly measured in insulating oil of these transformers with the two sorts of natural ester and mineral oil dielectric fluid respectively. Temperature of vegetable oil transformers was similar to temperature of mineral oil transformer in the same design at 80% load and above.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.33-35
• /
• 2006

배전 독립사업부제 도입 및 분산전원의 출현으로 배전계통은 계획 및 운영에 있어서도 변화가 일어 날 것이다. 예로, 기존의 방사상 구조의 배전 계통은 분산 전원의 출현으로 부분적인 그물망 구조로 변형될 수 있으며, 사업 구역이나 사업 지역으로 나누어진 배전계통에서는 서로 다른 관리 체제 하에서 운영이 필요하기 때문에 각 배전회사간의 정보 공유 문제가 발생할 수도 있다. 이러한 문제를 해결하기 위해 분화된 배전 계통의 특성을 고려하여 송전계통과 같이 전체 시스템에 대해 조류 계산하지 않고 배전 계통을 몇 개의 영역으로 나누고 다른 영역과의 경계 정보만을 이용하여 자신의 영역에 대한 조류 계산을 수행하는 알고리즘을 제안하였다. 이런 특성을 최대한 반영한 각 영역의 조류 계산은 분산 전원의 투입으로 인한 양방향 조류가 발생하게 되므로 그물망 구조로 된 구역과 기존의 방사상 구조로 된 영역으로 구분할 수 있다. 본 논문에서는 구역 특성에 맞고 배전 계통에 적용 가능한 알고리즘으로 먼저 분리 구역별 조류 계산을 수행한 후 그 다음 경계치 교환으로 배전 계통 전체의 조류 계산을 수행하는 알고리즘을 제안한다. 즉 방사상 구조 영역에서는 back/forward sweep 방법으로 수행하고 그물망 구조 영역에서는 Full Newton-Raphson 방법으로 구분하여 영역의 특성에 맞게 수행하였다.

• 대한전자공학회논문지
• /
• 제22권2호
• /
• pp.6-12
• /
• 1985

프로세서로 제어기를 구성하여 직류 전동기의 속도제어에 적용하였다. 계단 입력과 계단파 입력에 대해서 tracking 정도와 수렴속도를 측정하였다. 또한 power supply의 전압변동과 마찰부하의 변화에 대해서 파라미터를 추정하지 않는 선형궤환 방식보다 잘 적응함을 보였다.

• 한국ITS학회 논문지
• /
• 제8권4호
• /
• pp.73-83
• /
• 2009

최근 물류분야를 비롯한 여러 산업분야에서 RFID 도입과 관련된 다양한 연구들이 이루어지고 있다. 본 연구는 일관수송용 파렛트의 RFID 부착에 따른 경제적 효과분석 및 RFID 도입비용 추정모형을 개발을 통하여 향후 물류분야 RFID 도입의 활성화 및 효율성 제고를 위한 기반을 마련하였다. 이를 위하여 50개 물류업체의 RFID 도입에 따른 의식도 조사자료를 이용하였으며, 경제적 효과분석결과 B/C 2.766, NPV 26억 원의 효과가 있는 것으로 분석되어 기업물류차원에서 상당한 편익을 가져올 것으로 나타났다. 이는 기존의 정성적인 기대효과 제시에 머무르고 있는 현시점에서 본 연구의 결과가 의미하는 부분이 상당히 크다.

• 제어로봇시스템학회논문지
• /
• 제20권4호
• /
• pp.474-479
• /
• 2014

LEON3 is a 32-bit synthesizable processor based on the SPARC V8. It can be connected to AMBA 2.0 bus and has a 7- stage pipeline, IEEE-754 FPU and 256[KB] cache. It can be easily implemented using FPGA and used for a SoC design. DSU which comes with LEON3 can be used to control and monitor the operation of LEON3. And DSU makes it easy to set a debugging environment for the development of both hardware and software for an embedded systems based on LEON3. This paper presents the summary of the debugging tool for LEON3 based embedded systems. The debugging tool can initialize the target hardware, find out how the target hardware is configured, load application code to a specified memory space and run that application code. To provide users a debugging environment, it can set breakpoints and control the operation of LEON3 correspondingly. And function call trace is one of key functions of the debugging tool.

• 대한기계학회논문집A
• /
• 제29권8호
• /
• pp.1146-1152
• /
• 2005

Recently, multi cell tube which is used for a cooling system of automobiles is mainly manufactured by the conform extrusion but this method is inferior as compared with direct extrusion in productivity per the unit time and in the equipment investment. Therefore, it is essential for the conversion of direct extrusion with porthole die. The direct extrusion with porthole die can produce multi cell tube which has the competitive power in costs and qualities compared with the existing conform extrusion. This study is designed to evaluate metal flow, welding pressure, extrusion load, tendency of mandrel deflection that is affected by variation of porthole shape in porthole die. Estimation is carried out using finite element method under the non-steady state. Also this study was examined into the cause of mandrel fracture through investigating elastic deformation of mandrel during the extrusion.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권11호
• /
• pp.568-574
• /
• 2001

This paper describes a current fed high frequency resonant inverter can be used as the power supply for wax-sealing. This circuit configuration is composed of conventional two unit inverter of single ended current find type in parallel. The proposed inverter can realize ZVS operation by using resonant capacitor to ZVS capacitor and has merits not only reduction of switch current distribution but also extension of load range in comparison with the conventional single-ended current fed high frequency resonant inverter. This analysis of proposed circuit uses normalized parameter and characteristic estimation which is needed in each step before design is generally described according to normalized frequency($\mu$), normalized resistance(λ) and parameters. On the basis of characteristic values, a method of the circuit design is presented. Also, the theoretical analysis is proved through experiment and this proposed circuit shows that it can be practically used as the power supply system for wax-sealing and DC-DC converter.