• 환경생물
• /
• 제40권2호
• /
• pp.164-171
• /
• 2022

꽃노랑총채벌레(Frankliniella occidentalis)는 500종 이상의 기주를 가지고 토마토반점위조바이러스(Tomato spotted wilt virus; TSWV)를 매개하는 해충이다. 전 세계적으로 방제를 위해 노력하고 있지만 살충제를 이용한 방제는 저항성 그리고 환경 및 경제적 부담으로 인한 한계를 보였기 때문에 고정 정확도를 설정한 표본조사법(Fixed-precision level sampling plan)을 개발하였다. 고추(Capsicum annuum)의 꽃노랑총채벌레 성충 방제를 위한 표본 조사법은 공간분포분석, 표본추출 정지선 그리고 의사결정법으로 구성되었다. 표본추출은 식물체를 상단(지상에서 180 cm 이상), 중단(지상에서 120~160 cm 이상), 하단(지상에서 70~110 cm 이상)으로 나누어 각 높이별로 꽃 3개에서 나오는 꽃노랑총채벌레의 성충의 마리 수를 조사하였다. 표본 추출을 통해 꽃노랑총채벌레 성충의 밀도는 다른 식물체 위치(중단, 하단)보다 상단에서 높은 것으로 나왔다. 공간분포분석에서는 Taylor's power law (TPL)를 통해 도출한 각 위치별 계수를 공분산분석(ANCOVA)하여 차이를 비교하였다. ANCOVA 결과에서 도출된 절편과 기울기의 P 값이 각각 0.94, 0.87인 것을 통해 식물체 내 위치별로 차이가 없음을 확인한 후, 자료를 통합(pooling)하여 계산된 TPL 계수를 이용하여 표본추출 정지선을 구하였다. 꽃노랑총채벌레의 방제의사결정을 위한 방제밀도 수준(m₀)은 문헌을 참조하여 3과 18로 설정하였으며 설정값(m₀)을 이용해 최대표본수(N_max)도 조사하였다. 조사 결과, m₀=3, 18일 때 N_max값은 각각 약 97개, 1149개로 계산되었다. 개발된 모델의 적합성 검정을 위해 분석에 사용하지 않은 독립자료를 이용해 Resampling Validation for Sampling Program (RVSP) 프로그램으로 개발된 표본추출법의 적합성 평가를 실시하였고 적합한 정확도를 보이는 것으로 조사되었다.

• Journal of Nutrition and Health
• /
• 제42권1호
• /
• pp.78-96
• /
• 2009

본 연구는 D관공서 M 식당의 메뉴관리 및 식재료의 효율적 관리에 필요한 기초자료를 제공하고, 나아가 관공소급식소의 메뉴분석방법을 기초로 한 급식관리 필요성을 제시하고자 1982년 Kasavana와 Smith가 개발한 Menu Engineering 기법을 활용하여 2007년 1월부터 12월까지 1년간의 식단을 계절별, 년간 그리고 메뉴군별로 분석을 실시하여 다음과 같은 결과를 얻었다. 1) D 관공서는 토요일 휴무기관으로서 2007년도 급식 일수는 248일이었으며, 총 35,193명이 이용하여 1일 평균 이용 인원은 141명으로 나타나 주 고객층의 식당 이용률은 64.0%이었다. 2) M 식당의 주 고객은 총 220명으로 남자 183명 (83.2%), 여자는 37명 (16.8%)이었으며, 남자의 평균연령은 $44.1\;{\pm}\;6.3$세, 여자는 $32.7\;{\pm}\;6.4$세로 나타나 여자 보다 남자의 평균연령이 유의하게 높았다 (p < .0001). 3) 직급별 조사에서는 판사 (124명)가 56.4%, 일반직 (96명)이 43.6%로 나타났으며, 주 고객층의 과반수이상 (51.8%)이 남자 판사이었다. 4) 봄철 ($3{\sim}5$월)에는 갈비탕 외 81가지의 메뉴가 제공 되었으며, 공헌마진과 인기도가 높은 STAR로 판정된 메뉴는 김치볶음밥, 갈비탕, 대구매운탕, 동태매운탕 등 23가지 (28.0%)이었다. 공헌마진은 낮으나 인기도가 높은 PLOWHORSE로 판정된 메뉴는 봄나물비빔밥, 김치찌개, 삼계탕, 선지해장탕 등 26가지 (31.7%)이었고, 공헌마진률은 높으나 인기도가 낮은 PUZZLE로 판정된 메뉴로는 꽃게탕, 낙지연포탕, 돈까스 등 15가지 (18.3%) 이었다. DOG로 판정된 메뉴는 고등어구이, 단호박 영양밥, 마파두부덮밥 등 18가지 (22.0%)로 조사되었다. 5) 여름철 ($6{\sim}8$월)에는 총 74가지 메뉴가 제공되었으며 STAR로 판정된 메뉴는 날치알밥, 콩나물국밥, 동태매운탕 등 20가지 (27.0%), PLOWHORSE 메뉴는 김쌈밥, 마파두부덮밥, 산채비빔밥 등 28가지 (37.8%), PUZZLE 메뉴는 냉모밀국수, 돈까스, 된장찌개 등 8가지 (10.8%), DOG 메뉴는 고등어자반구이, 꽁치소금구이 등 18가지 (24.3%)로 나타났다. 6) 가을철 ($9{\sim}11$월)에는 총 75가지의 메뉴가 제공되었으며, STAR 메뉴는 김치콩나물국밥, 동태매운탕, 만두전골, 버섯전골, 어묵백반, 우거지갈비탕, 추어탕 등 23가지 (30.7%), PLOWHORSE 메뉴는 김쌈밥, 마파두부덮밥, 잡채덮밥 및 카레라이스, 김치찌개, 된장찌개, 선지해장국, 순두부찌개, 얼갈이해장국, 육개장 등 24가지 (32.0%), PUZZLE 13가지 (17.3%), DOG 15가지 (20.0%)로 나타났다. 7) 겨울철에는 총 74가지의 메뉴가 제공되었으며 STAR메뉴 김치볶음밥, 날치알밥, 갈비탕, 굴해장국, 청국장찌개, 추어탕 등 25가지 (33.8%), PLOWHORSE 메뉴는 김쌈밥, 낙지비빔밥, 마파두부덮밥, 떡만두국, 얼갈이해장국, 육개장, 불고기정식 등 21가지 (28.4%), PUZZLE 메뉴는 갈치구이, 고등어구이, 닭매운찜 등 14가지 (18.9%), DOG 메뉴는 간장닭찜, 고등어자반구이 등 14가지 (18.9%)로 조사되었다. 8) 사계절 STAR 메뉴는 김치볶음밥 등 8가지로 전체 메뉴 중 6.2%에 불과해 사계절 DOG 메뉴 14가지 10.9% 보다 낮은 비율이었다. PLOWHORSE 메뉴 (김쌈밥 등 14가지) 10.9%, PUZZLE 메뉴 (새우볶음밥/자장소스 등 17가지) 13.2%으로 나타났다. 9) 년간 제공된 128가지의 주메뉴를 메뉴군별로 분류한 결과 밥류 29가지 (22.6%), 국/탕류 27가지 (21.1%), 면류 18가지 (14.1%), 찌개/전골류 13가지 (10.2%), 조림/찜류 12가지 (9.3%), 구이류와 양식류 각각 8가지 (6.3%), 양식 8가지 (6.25%), 볶음류 7가지 (5.5%), 중국음식 4가지 (3.1%) 및 기타 (1.5%)로 조사되었다. 10) 년간 STAR 메뉴의 비율은 양식 (75.0%), 국/탕류 (48.1%), 찌개/전골류 (23.1%), 밥류 (17.2%) 순이었으며, 구이류와 조림/찜류에는 STAR 메뉴가 없었다. PLOWHORSE 메뉴는 구이류 (75.0%), PLOWHORSE 메뉴는 '구이류 (75.0%)', '국/탕류 (29.6%)', '밥류 (27.6%)', '조림/찜류 (27.3%)' 순이었으며, 찌개/전골류에서는 PUZZLE이나 DOG 메뉴가 없었다. PUZZLE 메뉴는 조림/찜류와 면류 (각각 33.3%), 밥류 (31.0%) 순이었고, DOG 메뉴는 중국음식 (75.0%)과 면류 (55.6%)에서 많았다. 11) 주메뉴 128가지에 대하여 STAR, PLOWHORSE, PUZZLE, DOG 메뉴에 대한 비율은 각각 23.4%, 30.5%, 23.4%, 22.7%로 나타나 공헌마진과 인기도 모두 낮은 DOG 메뉴가 29가지 (22.7%)나 되었다. 본 연구는 단체급식소에서의 과학적인 메뉴분석 기법을 적용한 정기적인 메뉴분석에 기초자료를 제공하며, 계절별 및 중 장기적인 메뉴분석결과를 기초로 하는 메뉴관리가 이루어져야 함을 제안하고자 한다. 향후에는 배식 후 잔반량 조사와 피급식자의 주관적인 평가도 메뉴분석방법에 반영된 연구가 이루어져야할 것으로 사료된다.

• 항공우주정책ㆍ법학회지
• /
• 제1권
• /
• pp.147-162
• /
• 1989

The current status of the application and interpretation of the Warsaw Convention and its subsequent Protocols in Asian countries is in its fredgling stages compared to the developed countries of Europe and North America, and there is thus little published information about the various Asian governments' treatment and courts' views of the Warsaw System. Due to that limitation, the accent of this paper will be on Korea and Japan. As one will be aware, the so-called 'Warsaw System' is made up of the Warsaw Convention of 1929, the Hague Protocol of 1955, the Guadalajara Convention of 1961, the Guatemala City Protocol of 1971 and the Montreal Additional Protocols Nos. 1,2,3 and 4 of 1975. Among these instruments, most of the countries in Asia are parties to both the Warsaw Convention and the Hague Protocol. However, the Republic of Korea and Mongolia are parties only to the Hague Protocol, while Burma, Indonesia and Sri Lanka are parties only to the Warsaw Convention. Thailand and Taiwan are not parties only to the convention or protocol. Among Asian states, Indonesia, the Phillipines and Pakistan are also parties to the Guadalajara Convention, but no country in Asia has signed the Guatemala City Protocol of 1971 or the Montreal Additional Protocols, which Protocols have not yet been put into force. The People's Republic of China has declared that the Warsaw Convention shall apply to the entire Chinese territory, including Taiwan. 'The application of the Warsaw Convention to one-way air carriage between a state which is a party only to the Warsaw Convention and a state which is a party only to the Hague Protocol' is of particular importance in Korea as it is a signatory only to the Hague Protocol, but it is involved in a great deal of air transportation to and from the united states, which in turn is a party only to the Warsaw Convention. The opinion of the Supreme Court of Korea appears to be, that parties to the Warsaw Convention were intended to be parties to the Hague Protocol, whether they actually signed it or not. The effect of this decision is that in Korea the United States and Korea will be considered by the courts to be in a treaty relationship, though neither State is a signatory to the same instrument as the other State. The first wrongful death claim in Korea related to international carriage by air under the Convention was made in Hyun-Mo Bang, et al v. Korean Air Lines Co., Ltd. case. In this case, the plaintiffs claimed for damages based upon breach of contract as well as upon tort under the Korean Civil Code. The issue in the case was whether the time limitation provisions of the Convention should be applicable to a claim based in tort as well as to a claim based in contract. The Appellate Court ruled on 29 August 1983 that 'however founded' in Article 24(1) of the Convention should be construed to mean that the Convention should be applicable to the claim regardless of whether the cause of action was based in tort or breach of contract, and that the plaintiffs' rights to damages had therefore extinguished because of the time limitation as set forth in Article 29(1) of the Convention. The difficult and often debated question of what exactly is meant by the words 'such default equivalent to wilful misconduct' in Article 25(1) of the Warsaw Convention, has also been litigated. The Supreme Court of Japan dealt with this issue in the Suzuki Shinjuten Co. v. Northwest Airlines Inc. case. The Supreme Court upheld the Appellate Court's ruling, and decided that 'such default equivalent to wilful misconduct' under Article 25(1) of the Convention was within the meaning of 'gross negligence' under the Japanese Commercial Code. The issue of the convention of the 'franc' into national currencies as provided in Article 22 of the Warsaw Convention as amended by the Hague Protocol has been raised in a court case in Korea, which is now before the District Court of Seoul. In this case, the plaintiff argues that the gold franc equivalent must be converted in Korean Won in accordance with the free market price of gold in Korea, as Korea has not enacted any law, order or regulation prescribing the proper method of calculating the equivalent in its national currency. while it is unclear if the court will accept this position, the last official price of gold of the United States as in the famous Franklin Mint case, Special Drawing Right(SDR) or the current French franc, Korean Air Lines has argued in favor of the last official price of gold of the United States by which the air lines converted such francs into us Dollars in their General Conditions of Carriage. It is my understanding that in India, an appellate court adopted the free market price valuation. There is a report as well saying that if a lawsuit concerning this issue were brought in Pakistan, the free market cost of gold would be applied there too. Speaking specifically about the future of the Warsaw System in Asia though I have been informed that Thailand is actively considering acceding to the Warsaw Convention, the attitudes of most Asian countries' governments towards the Warsaw System are still wnot ell known. There is little evidence that Asian countries are moving to deal concretely with the conversion of the franc into their own local currencies. So too it cannot be said that they are on the move to adhere to the Montreal Additional Protocols Nos. 3 & 4 which attempt to basically solve many of the current problems with the Warsaw System, by adopting the SDR as the unit of currency, by establishing the carrier's absolute liability and an unbreakable limit and by increasing the carrier's passenger limit of liability to SDR 100,000, as well as permiting the domestic introduction of supplemental compensation. To summarize my own sentiments regarding the future, I would say that given the fact that Asian air lines are now world leaders both in overall size and rate of growth, and the fact that both Asian individuals and governments are becoming more and more reliant on the global civil aviation networks as their economies become ever stronger, I am hopeful that Asian nations will henceforth play a bigger role in ensuring the orderly and hasty development of a workable unified system of rules governing international commercial air carriage.

• 자연과학논문집
• /
• 제14권1호
• /
• pp.83-121
• /
• 2004

본 연구는 영농규모화에 대한 전개과정과 충남지역 쌀 생산기반을 검토하고 쌀 산업의 미래지향적 방향의 한 축을 이어갈 쌀 전업농의 영농규모화를 통한 그 대안을 모색하는데 있다. 이 목적을 완성하기 위해 조사된 내용을 요약하면 다음과 같다. 1. 충남지역이 쌀 생산은 전국에서 가장 높으며 재배면적에서도 제2위를 차지하고 있다. 이는 그만큼 쌀에 대한 국제적 정세변화는 충남의 쌀 생산농가에게 지대한 영향을 미칠 수 있는 개연성을 높여준다. 쌀 생산의 핵심이 되는 전업농가 수는 도내 전체농가의 7.7%를 차지하고 있고, 이들의 평균 경작면적은 2.9ha 이다. 이 면적은 규모화사업을 위해 지원된 자금이 크게 주효한 결과라고 해석된다. 2. 1980년대 후반부터 2002년까지 추진된 충남지역 영농규모화사업은 충남지역에 쌀 전업농가의 경영규모를 19,484ha까지 증가시켰다. 또한 1995년부터 2002년까지 매매사업이 이루어진 농가 수는 6,431농가에 1,6517ha가 매매되었으며, 장기임대차사업은 같은 기간동안 7,059농가에 면적은 6,970ha에 이르렀다. 다만 농지교환분합사업은 210ha에 1,864농가가 참여하였는데 이처럼 농지교환.분합사업이 활발하지 못한 것은 은퇴자들이 영농에 넓은 면적을 요망하지 않아 구태여 규모화사업에 응하지 않더라도 생활에 지장이 없기 때문이다. 또한 교환과 분합작업에 따른 복잡성 등, 일반 사회적 여건도 농지의 교환분합사업에 부정적인 방향으로 작용했던 것으로 추정된다. 3. 영농규모화사업을 촉진하기 위해서 제안된 방안들은 다음과 같다. (1) 재촌탈농자 및 고령 은퇴자를 위한 전직 프로그램 및 사회보장프로그램을 수립하고 농지매매 촉진을 위한 각종 인센티브제를 도입하여야 할 것이다. (2) 효율적인 쌀 생산시스템을 확립하기 위하여 단위면적당 생산량을 증대시키고 생산비를 낮추는 제 방안이 강구되어야 한다. 이를 위해서는 쌀 생산기술과 경영적 능력을 갖춘 생산조직이 육성되어야 하며 시설의 적정배치 및 정보화가 완비되어야 한다. 그리고 영농시스템 구축에 바탕을 둔 지역종합의 다양한 구조개선도 병행하지 않으면 안 될 것이다. (3) 경영규모를 확대, 개선하기 위해서는 개별경영규모를 확대하거나 집단규모를 활용한 방안이 강구될 수 있을 것이다. 이상을 종합하면 충남의 영농규모화사업은 성공적으로 수행되어 왔다고 할 수 있으나, 궁극적으로 이 사업이 소기의 목적을 달성하기 위해서는 부수되는 제반 문제점을 적절히 해결해 가지 않으면 안 된다. 그리고 쌀 전업농에 대한 적절한 지원 및 탈농자 및 은퇴자에 대한 종합대책수립은 충남의 영농규모화사업을 완수하는데 반드시 선결되어야할 사항이다.

• 한국잠사곤충학회지
• /
• 제25권1호
• /
• pp.34-43
• /
• 1983

1. 우리나라 養絲業은 ‘60年代 以後 ’70年代 前半期까지 急伸長하여 ‘76年에는 蠶繭生産量은 年平均 18.5%, 뽕밭面積은 年平均 16.4%가 減少하여, 養蠶生産基盤이 約 1/3로 萎縮되어, 生絲類 供給不足 現狀이 深化되어 養蠶基盤確保問題가 重要課題가 되고 있다. 2. 養蠶基盤 激減의 原因은 70年代 後半期 以後 國際景氣沈帶에서 오는 絲價의 下落, 輸入觀制等의 外部的 要因과 繭價引上率의 鈍化, 養蠶收益性의 相對的 底現狀이 두드러지게 나타났다. 이 現狀은 農業地帶別로 보면 ‘76年 대비 ’80年의 蠶繭生産量이 嶺南의 山間混作地帶가 33%減으로 가장 安定된 反面 江原道를 비롯한 準山間 田作地帶가 70%減으로 가장 크게 變動되었고, 이를 다시 行政單位別로 보면 慶南山淸等 6個郡은 20%未滿減인데 비해, 江原三陟等 16個郡은 80% 以上減이다. 面單位로 細分하여 보면 25個面은 오히려 增産되었고 143個面은 80% 以上이나 減少하는등 地域單位가 적어질수록 그 격차가 크게 나타나고 있음을 알 수 있다. 4. 蠶繭生産量의 增減과 가장 깊은 상관관계가 있는 것은 農家戶當 蠶繭生産量의 減少率로서 各道 다같이 正의 상관관계를 나타내었으며, 10a當 蠶繭生産量의 多寡와 一般耕地面積 및 밭面積中의 뽕밭面積 比率도 主要한 要因으로 作用하였다. 5. 養蠶經營 및 技術實態를 (79年 대비 81年) Computer에 의하여 精密調査하고자 農業地帶別로 17個郡 464里洞을 대상으로 調査한 결과는 다음과 같다. 1) 戶當蠶繭生産量 農業地帶別은 大差 없으나 比較的 安定된 里洞(79대비 81, 20%未滿減)은 戶當生産量이 ‘79年 100.8kg에서 81年이 122kg로 增産, 不安定里洞(40% 以上減)은 102.9.kg에서 82kg로 減産되었다. 2) 10a當 收繭量 山間地 보다 平野地가 많으며 安定里洞은 73.4kg, 不安定里洞은 55kg였다. 3) 가지뽕치기 普及率 山間地 보다 平野地가 높으며 安定里洞은 79年3 養蠶의 普及率.이 24.2%, 秋蠶은 16.7%에서 ‘81年4은 34.3% 10.1%로 各各 擴大된 경향이나, 不安定里洞은 81年이 春蠶 13.3%, 秋蠶 12.6%로 安定里洞에 비하여 크게 떨어지고 있다. 4) 養蠶複合經營의 類型 <養蠶十水稻十特作>이 55%로 가장 많고 <養蠶十水稻十一般作物>과 <養蠶十水稻가 各各 14%를 차지하고 있으며 養蠶所得이 農業所得에서 占하는 比重이 20%未滿 里洞이 81%나 되어 完全複合經營管 形態에는 이르지 못하고 있다. 5) 農業公害와 農藥型態 農業公害는 平野地에서는 主로 水稻에서 오는 것이 많고 그 被害 時期는 秋蠶期가 大部分을 차지하고 撒布農藥은 液劑가 65%, 粒劑가 35%로 粒劑使用 比重이 낮은 것은 價格이 비싼 때문이다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 농업과학연구
• /
• 제4권2호
• /
• pp.344-390
• /
• 1977

본(本) 연구(硏究)는 계획기간내(計劃期間內)의 재적수확량(材積收穫量)을 최대화(最大化)하고 각분기(各分期)의 수확량(收穫量)과 수확면적(收穫面積)을 일정(一定) 범위(範圍)로 제약(制約)하여 계획기간내(計劃期間內)의 보속수확(保續收穫)을 도모(圖謀)하는 동시(同時)에 후계림(後繼林)의 법정영급배치(法正令級配置)가 유도(誘導)될 수 있는 적정수확안(適正收穫案)을 선형계획법(線型計劃法)에 의하여 선정(選定)하고, 제약량(制約量)의 변화(變化)가 총수확량(總收穫量) 및 분기별(分期別) 수확량(收穫量)과 수확면적(收穫面積)에 미치는 영향(影響)을 구명(究明)하는데 목적(目的)이 있다. 서울 대학교(大學校) 농과대학(農科大學) 부속연습림중(附屬演習林中) 개벌작업급(皆伐作業級)에 속하는 219개(個) 소반(小班)을 대상(對象)으로 하였으며, 이 삼림(森林)은 영급구성면(令級構成面)에서 볼 때 유영급(幼令級) 임분(林分)이 많다는 점(點)에서 전국(全國) 삼림(森林)을 대표(代表)한다고 할 수 있다. 본(本) 연구(硏究)에서는 한 분기년수(分期年數)를 5년(年), 계획기간(計劃期間)을 10분기(分期), 1영급(令級)을 5영개(令皆)로 하였으며, 벌채영급(伐採令級)의 범위(範圍)는 5~9영급(令級)이다. 한편, 후계림(後繼林)은 현실림(現實林)이 수확(收穫)되는 즉시 조림(造林)되고, 미립목지(未立木地)는 1분기내(分期內)에 조림(造林)되며 다음 벌기(伐期)까지 충분(充分)한 입목도(立木度)가 이루어지는 것으로 전제(前提)하였다. 소반(小班)을 벌구(伐區)로 하여, 각벌구(各伐區)가 계획기간내(計劃期間內)에 벌채(伐採)될 수 있는 모든 가능(可能)한 대체수확안(代替收穫案)을 그의 영급(令級)에 따라 작성(作成)하고, 여기에 현실림(現實林)과 후계림(後繼林)의 벌기예상수확량(伐期豫想收穫量)을 대입(代入)하여 각대체안(各代替案)의 계획(計劃) 기간내(期間內) 수확량(收穫量)($V_{i,\;k}$)을 산정(算定)하였다. 이때 각벌구(各伐區)의 벌기예상수확량(伐期豫想收穫量)은 기존(旣存) 임분수확표(林分收穫表)와 산림조사부(山林調査簿) 자료(資料)를 이용(利用)하는 범위내(範圍內)에서 추정(推定)하였으며, 각벌구(各伐區)에 소속(所屬)되는 대체수확안중(代替收穫案中)에서 $V_{i,\;k}$가 가장 큰 수확안(收穫案)을 적정수확안(適正收穫案)으로 선정(選定)하였다. 우선 제약조건(制約條件)이 없을 때의 적정수확안(適正收穫案)을 선정(選定)하여 분기별(分期別) 수확량(收穫量)과 수확면적(收穫面積), 총수확량(總收穫量)을 계산(計算)한 다음, 이를 기준(基準)으로 하여 분기별(分期別) 수확량(收穫量)의 상한(上限)($V_{j-max}$)과 하한(下限)($V_{j-min}$) 및 수확면적(收穫面積)의 상한(上限)($A_{j-max}$)과 하한(下限)($A_{j-min}$)을 결정(決定)하였다. 이러한 여러가지 제약조건하(制約條件下)의 적정수확안(適正收穫案)은 LP수확조절(收穫調節)모델을 유도(誘導)하여 선정(選定)하였으며, 제약조건(制約條件) 및 벌채영급범위(伐採令級範圍)의 변화(變化)가 총수확량(總收穫量)에 미치는 영향(影響)을 분석(分析)하고자 감응도분석(感應度分析)을 실시(實施)하였다. 본(本) 연구(硏究) 결과(結果)를 요약(要約)하면 다음과 같다. 1. 제약조건(制約條件) 없이 적정수확안(適正收穫案)을 선정(選定)한 결과(結果), 수확면적(收穫面積)이 분기별(分期別)로 큰 차이(差異)를 보였다. 즉, 총수확량(總收穫量)의 68.8%가 10분기(分期)에 편재(偏在)되어 있고 6~7분기(分期)에는 전(全)혀 수확량(收穫量)이 없으며, 분기별(分期別) 수확면적(收穫面積)도 이와 유사(類似)한 경향(傾向)을 보였다. 이와 같이 분기별(分期別) 수확량(收穫量) 및 수확면적(收穫面積)에 차이(差異)가 많은 것은 현실림(現實林)의 영급구성(令級構成)과 입목축적(立木蓄積)이 대단히 불규칙(不規則)하기 때문이다. 2. 수확량(收穫量)과 수확면적(收穫面積)의 분기별(分期別) 변동폭(變動幅)을 줄이면서 계획기간내(計劃期間內)의 재적수확량(材積收穫量)을 최대화(最大化)하고자, LP수확조절(收穫調節) 모델에 의하여 $A_{min}=150ha$ $A_{max}=400ha$, $V_{min}=5,000m^3$, $V_{max}=50,000m^3$일 때의 적정수확안(適正收穫案)을 선정(選定)한 결과(結果), 대체(大體)로 5분기(分期) 이후(以後)부터 보속수확(保續收穫)과 법정영급배치(法正令級配置)가 가능(可能)하게 되었다. 3. LP수확조절(收穫調節)모델에 간벌계획(間伐計劃)을 포함(包含)시켜 최적해(最適解)를 구(求)하면, 총수확량(總收穫量)이 증가(增加)함은 물론, 간벌계획(間伐計劃)을 포함(包含)시키지 않았을 경우(境遇)에 비하여 분기별(分期別) 보속수확(保續收穫)의 실현(實現)에 유리(有利)한 적정수확안(適正收穫案)을 선정(選定)해 주는 효과(效果)가 있다. 4. 보속수확(保續收穫)과 법정영급배치(法正令級配置)가 실현(實現)될 수 있는 시기(時期)는 제약량(制約量)의 강도(强度)가 높아짐에 따라서 빨라지며, 분기별(分期別) 수확량(收穫量)은 수확면적(收穫面積)에 비하여 제약량(制約量)의 변화(變化)에 따른 평준화(平準化) 경향(傾向)이 뚜렷하고, 분기별(分期別) 수확량(收穫量)의 평준화(平準化)가 이루어지면 분기별(分期別) 수확면적(收穫面積)은 이에 종속(從屬)되어 평준화(平準化)하는 경향(傾向)이 있다. 5. 제약조건(制約條件)의 강도(强度)가 높아짐에 따라 총수확량(總收穫量)은 점감적(漸減的)으로 감소(減少)하므로 빠른 시기(時期)에 엄정보속(嚴正保續)과 엄정영급배치(嚴正令級配置)를 의도(意圖)할 수록 총수확량(總收穫量)의 손실(損失)은 그만큼 더 증가(增加)한다. 6. 같은 계획기간(計劃期間) 및 제약조건하(制約條件下)에서의 총수확량(總收穫量)은 벌채영급(伐採令級)을 낮추고, 그 범위(範圍)를 넓힐수록 증가(增加)한다. 또한 벌채영급(伐採令級) 범위(範圍)의 상한(上限)을 고정(固定)하고, 그 하한(下限)을 1영급(令級)씩 높였을 때에 총수확량(總收穫量)이 감소(減少)되는 속도(速度)는, 그 범위(範圍)의 하한(下限)을 고정(固定)하고 상한(上限)을 1영급(令級)씩 낮추었을 때의 감소(減少) 속도(速度)보다 크다. 7. 본(本) 연구(硏究)에 제시(提示)된 LP수확조절(收穫調節)모델은 영급구성(令級構成)이 복잡(複雜)한 임분(林分)에 적용(適用) 가능(可能)하며, 간벌계획(間伐計劃)을 간단히 포함(包含)시킬 수 있고, 제약량(制約量)의 변화(變化)에 따른 총수확량(總收穫量)의 손실(損失)을 쉽게 계측(計測)할 수 있는 등 여러가지 장점(長點)이 있으므로, 우리나라의 현행(現行) 삼림수확조절법(森林收穫調節法)을 보완(補完)하기 위해서도 이 기법(技法)이 유효(有效)하게 이용(利用)될 수 있을 것으로 보인다.

• 한국작물학회지
• /
• 제8권1호
• /
• pp.129-177
• /
• 1970

수도작에 있어서 수량성의 향상과 경영의 합리화률 기하기 위한 집단재배의 기술체계를 확립하고자 지역과 지대별로 임의선정된 18개소에서 집단재배와 개별재배를 한 수도에 대하여 경종 및 생육ㆍ수량구성요소의 변이를 조사연구하였으며 460개소의 집단재배와 개별재배에 대하여 경종ㆍ경영 및 조직운영등을 비교조사하고 집단재배와 개별재배의 경제성을 분석하여 그 결과를 요약하면 아래와 같다. 1. 집단재배와 개별재배의 경종 및 생육ㆍ수량형질에 관하여 연구한 결과는 다음과 같다. (1) 육묘에 있어서 집단재배가 비료의 3요소 특히 인산과 가리의 사용량이 많았고 약제살포의 횟수도 많았다. (2) 본답에 있어서의 경종기술은 집단재배가 개별재배보다 ${\circled1}$ 이앙기가 빨랐고 ${\circled2}$ 재식밀도에 있어서 1주당 재식묘수는 적으나 단위면적당의 포기수는 많으며 \circled3 시비량은 질소, 인산, 가리 및 퇴비의 시용량이 현저히 많았고 ${\circled4}$ 분시횟수도 많았으며 ${\circled5}$ 살충제 및 살균제의 살포횟수도 역시 집단재배에서 많았다. (3) 도북의 정도는 집단재배가 약간 더 하였고 병해충의 발생정도는 잎도열병, 목도열병 그리구 멸구, 이화명충 1화기 및 2화기의 발생이 집단재배가 적었다. (4) 집단재배를 한 수도의 간장 및 수장은 길고 고중도 무거웠다. 그리고 조고비율은 집단재배에 있어서 80.9%, 개별재배가 69.9%로서 높은 유의차가 있었다. (5) 수량구성요소인 수수와 1수평균영화수가 집단재배에서 현저히 많았고 현미 1000립중도 무거웠으며 등숙율은 개별농가의 벼와 차이가 없었고 그 변이계수는 집단재배가 개별재배에 비하여 모두 작은 값을 보였다. (6) 현미수량은 평균 10a당 집단재배 459.0kg, 개별재배 374.8kg으로서 84.2kg이나 전자가 많았으며 그들간의 변이계수는 집단재배에서 작게 나타났다. (7) 기간재배기술과 수량구성요소의 상관관계에 있어서 고도의 유의상관을 보인 것은 파종기와 1수영화수, 못자리 약제살포횟수와 1수영화수, 이앙기와 1수영화수, 본답의 인산시용량과 수량, 본답의 가리시용량과 등숙율, 분시횟수와 수량등에서 정(+)상관을 보였고 파종기와 등숙율간에는 부(-)상관을 보였다. 2. 집단재배와 개별재배의 경종\ulcorner경영 및 조직운영에 대하여 종합적으로 조사비교한 결과는 다음과 같다. (1) 집단재배의 품종수는 13개이고 개별재배에서는 47품종으로서 개별재배가 품종의 단순화를 기하지 못하고 있다. (2) 육묘기술에 있어서 비료3요소 특히 인산과 가리의 시용량이 많았고 약제살포횟수가 많다는 것은 1ㆍ의 실험결과와 같으며 이밖에 집단재배의 경우에는 종자소특이 100% 실시되었으며 파종량도 3.3$m^2$당 표준파종량인 3.6～5.4이 파종이 많이 실시되었으나 개별재배에서는 박파와 밀파가 많아 파종량의 변이가 컸었다. (3) 이앙기, 재식밀도, 병충해방제, 약제살포횟수, 시비량 및 분시횟수등은 1.의 결과와 같으며 추경 및 객토와 동력경운기의 사용은 집단재배에서 많았으며 이앙방식은 종전의 정방형식에서 극단적인장방형식으로 많이 바뀌었으며 물관리에 있어서는 중각낙수와 간단관수가 비교적 많이 실시되었다. (4) 현미수량은 평균 10a당 집단재배가 466kg이고 개별재배는 380kg으로서 전자가 86kg 많았다. (5) 병충해방제작업이 집단재배에서 집단방제로 많이 실시되었고 종자소독도 80% 이상의 공동으로 이루어 졌으며 수확, 수확물의 운반, 탈곡, 논갈이 작업등도 개별재배에서 보다 많이 공동으로 이루어졌다. (6) 집단재배에서 객토 및 퇴비의 사용이 현저히 많았으며 그 작업도 공동으로 이루어진 비율이 높고 또한 노동력의 투입도 많았다. (7) 육묘 및 본답의 물관리작업은 집단재배가 개별재배보다 노동력의 투입이 적었다. (8) 비료, 농약 및 노동력등의 비용가액은 집단재배가 개별재배보다 많았으며 약 2배에 가까웠다. (9) 경영규모는 3ha로부터 7ha 이상의 범위에 있으며 5ha내외의 것이 많았고 1개소의 집단재배는 10～20개 정도의 필지로 되어있는 것이 대부분이었다. (10) 경영자 및 경작자의 학력은 집단재배의 회장, 재배반장, 방제반장 및 수리반장 모두 국민학교졸업 이상이 93.7%이며 개별재배는 83%를 보였고 그들의 연령은 40～45세가 가장 많으며 이러한 경향은 양자가 비슷하였다. (11) 집단재배의 운영에 관한 주요설문에 대한 경작자들의 반응은 집단재배를 함으로서 확실히 수량은 증가하였는데 이것은 시비법개선과 병충해방제의 효과가 가장 컸다고 생각하는 사람이 많았고 집단재배를 함으로서 영농자재의 입수와 모든 작업이 적기에 이루어 졌다고 하는 것이 많았다. 또한 경작노력은 적게 들었다는 것이 66.8%이며 이앙노력은 집단재배가 오히려 더 들었다는 것 그리고 관의 간섭이 많았다는 것 등이 특이한 것이며 집단재배의 계속을 원하는 농가가 74.5%이고 원치 않은 농가가 25.5%였었다. 3. 집단재배와 개별재배의 경제성을 분석한 결과는 다음과 같다. (1) 경영비의 비용가액중 퇴비, 금비, 농약대 및 고용노임은 집단재배에 있어서 개별재배보다 각각 335원, 199원, 388원 및 303원이 더 투입되어 큰 차이를 보였으나 기타생산비목들은 집단재배와 개별재배간에 큰 차이가 없었다. (2) 총수익에서 경영비를 뺀 소득은 집단재배에서 24,302원이였고 개별재배에서는 20,168원으로 집단재배에서 10a당 4,134원의 소득증대를 나타내었다. 본 연구에서 수도집단재배는 새로운 기술의 적용도를 높이고 경영의 합리화를 기하여 안전다수확으로 개개 농가의 소득증대에 기여하였을 뿐만아니라 농민에게 새 기술의 적용이 유익했다는 실증을 보여 줌으로서 농민 스스로의 생산과정에 파급적이며 영속적인 변화를 촉진시킬것이라는 또 하나의 결론을 얻었다.

• 한국산림과학회지
• /
• 제15권1호
• /
• pp.1-38
• /
• 1972

우리나라는 근래(近來) 고도경제성장(高度經濟成長)으로 인(因)하여 목재수요(木材需要)가 급증(急增)하고 있으나 국내생산재(國內生産材)가 공급율(供給率)은 수요량(需要量)의 20% 정도(程度)에 지나지 않아 많은 외재(外在)를 도입(導入)하고 있으므로 장래(將來)의 목재(木材) 수요공급(需要供給)의 균형(均衡)을 이룩하기 위하여 강력(强力)한 산림자원(山林資源) 조성사업(造成事業)의 추진(推進)이 요망(要望)된다. 산림자원(山林資源) 조성사업(造成事業)을 추진(推進)하는데 있어서 가장 중요(重要)한 것은 조림의욕(造林意慾)을 높이고 조림사업(造林事業)에 필요(必要)한 산업자본(産業資本)을 산림(山林)에 유치(誘致)하도록 하는 일인데, 이러한 역할(役割)을 할 수 있는 경제적시설(經濟的施設)의 하나가 산림보험제도(山林保險制度)의 실시(實施)인 것이다. 산림보험(山林保險)을 실시(實施)하면 산림재해(山林災害)가 보상(補償)되므로 자본가(資本家)는 안심(安心)하고 조림투자(造林投資)를 할 수 있을 뿐만 아니라 산림(山林)을 담보(擔保)로 한 금융(金融)의 길도 열리어 투자(投資)한 산림(山林)에 환금성(換金性)이 주어지므로 산업자본가(産業資本家)가 산림투자(山林投資)를 회피(回避)하지 않게 되어 산림자원(山林資源) 조성사업(造成事業)이 촉진(促進)될 수 있다. 이러한 관점(觀點)에서 외국(外國)에서는 19세기말(世紀末)부터 산림보험제도(山林保險制度)가 실시(實施)되기 시작(始作)하여 주요(主要) 임업선진국(林業先進國)에서는 모두 산림보험(山林保險)을 실시(實施)하고 있는 것이다. 산림보험(山林保險)을 실시(實施)하는데 있어서 가장 중요(重要)한 것은 장기간(長期間)에 걸친 산림재해(山林災害)의 통계자료(統計資料)를 정확(正確)히 조사(調査)하는 일과 그 나라의 여건(與件)에 맞는 산림보험제도(山林保險制度)를 창설(創設)하는 일이다. 과거(過去) 10년간(年間)(1961~1970)의 년평균(年平均) 산림재해상황(山林災害狀況)을 조사(調査)한 결과(結果)는 산림화재(山林火災)가 9,000여정보(餘町步), 곤충피해(昆蟲被害)가 570,000정보(町步), 병균피해(病菌被害)가 694정보(町步)로 나타났다. 특(特)히 그중 외국(外國)의 산림보험(山林保險)에서 재해보상(災害補償) 대상(對象)의 으뜸이 되고 있는 산림화재(山林火災) 피해상황(被害狀況)을 과거(過去) 18년간(年間)(1953~1970)에 걸쳐서 조사(調査)한 결과(結果)에 의하면 산화면적(山火面積) 위험율(危險率)이 $\frac{1.1853}{1,000}$였고 1960~1969년(年) 사이의 전국(全國) 산림화재면적(山林火災面積) 위험율(危險率)은 $\frac{1.3045}{1,000}$로서 유우럽에 비(比)하여 높았으나 일본(日本)에 비(比)하여 그리 높지 않았다. 또 과거(過去) 5년간(年間)(1966~1970)의 전국(全國)의 산화재적(山火材積) 위험율(危險率)은 $\frac{0.1991}{1,000}$로서 대단(大端)히 낮은데 이것은 우리나라 산림(山林)의 축적(蓄積)이 빈약(貧弱)한데서 온 결과(結果)였다. 이러한 산림재해상황(山林災害狀況)에 비추어 우리나라에서 산림보험(山林保險)을 실시(實施)하려면 어떠한 내용(內容)의 산림보험제도(山林保險制度)를 설립(設立)하는 것이 좋겠는가 하는 질문조사(質問調査)의 결과(結果)는 다음과 같았다. 1. 산림보험(山林保險)의 필요성(必要性) 산림보험(山林保險)은 산림담보(山林擔保)에 의(依)한 금융(金融)의 길을 열어주고(5.65%), 산림피해(山林被害)를 당(當)하였을 때 재조림비(再造林費)를 확보(確保)하게 하여(35.87%), 조림투자(造林投資)를 보증(保證)하는 수단(手段)(46.74%)으로 반드시 실시(實施)되어야 한다고 응답(應答)하였다. 2. 산림보험법(山林保險法) 산림(山林)의 특수성(特殊性)에 비추어 일반(一般) 손해보험(損害保險) 규정(規程)을 준용(準用)할 것이 아니라(8.35%), 산림보험(山林保險)을 위한 특별볍(特別法)을 제정(制定)하여야 한다고 응답(應答)하였다(88.26%). 3. 보험경영업체(保險經營業體)의 종류(種類) 일반(一般) 보험회사(保險會社)(17.42%)나 산림소유자(山林所有者) 상호조합(相互組合)(23.53%)에서 산림보험(山林保險)을 취급(取扱)할 수도 있겠으나, 산림보험(山林保險)의 특이성(特異性)에 비추어 국(國) 공영산림보험(公營山林保險)의 별도(別途)로 운영(運營)되어야 한다고 반응(反應)하였다(56.18%). 4. 보험사고(保險事故)의 종류(種類) 산림보험(山林保險) 사고(事故)를 산화(山火)에 국한(局限)시키거나(23.38%), 산화(山火) 및 기상해(氣象害)만을 포함(包含)시키면 된다는 의견(意見)도 있으나(14.32%), 산림보험(山林保險) 사고(事故)에 산화(山火), 기상해(氣象害), 병충해(病蟲害)까지 포함(包含)시켜야 한다는 의견(意見)이 가장 많았다(60.68%). 5. 보험사고(保險事故) 취급대상(取扱對象)의 종류(種類) 산림보험(山林보험) 취급대상(取扱對象) 수종(樹種)은 침엽수(針葉樹) 인공림(人工林)에 한정(限定)시키거나(13.47%), 침엽수(針葉樹)와 활엽수(濶葉樹)의 인공림(人工林)만을 포함(包含)시키기를 원(願)하는 반응자(反應者)도 있었으나(23.74%), 많은 반응자(反應者)가 수종(樹種), 임종(林種)(인공(人工), 천연(天然)) 구별(區別)없이 모두 포함(包含)시켜야 된다고 반응(反應)하였다(61.64%). 6. 보험사고(保險事故) 취급대상(取扱對象)의 범위(範圍) 산림보험(山林保險) 사고(事故) 취급대상(取扱對象) 범위(範圍)는 10년(年) 이하(以下)의 유령림(幼齡林)만 취급(取扱)하기를 원(願)하는 자(者)(15.23%), 20년(年) 이하(以下)의 임목(林木)만을 대상(對象)으로 하면 족(足)하다는 반응자(反應者)가 있었으나(32.95%), 많은 반응자(反應者)가 40년생(年生) 이하(以下)의 임목(林木)까지 포함(包含)하기를 바라고 있었다(46.37%). 7. 보험계약(保險契約) 기간(期間) 산림보험(山林保險) 계약기간(契約期間)은 1년(年) 단위(單位)가 좋다는 자(者)도 상당(相當)히 있었으나(31.74%), 과반수(過半數)가 5년(年) 단위(單位)로 계약(契約)하는 것을 바라고 있었다(58.68%). 8. 보험계약(保險契約)의 제한(制限) 5정보(町步) 미만(未滿)의 소면적(小面積)은 산림보험(山林保險) 대상(對象)에서 제외(除外)하고(20.78%), 단위(單位) 면적당(面積當) 일정(一定) 재적(材積) 또는 주수(株數)를 보유(保有)하고 있는 산림(山林)만을 계약대상(契約對象)으로 하는 것이 좋다고 반응(反應)하였다(63.77%). 9. 계약방법(契約方法) 산림보험(山林保險) 계약방법(契約方法)은 임의(任意)로 산림(山林)을 선택(選擇)하여 계약(契約)하기를 원(願)하는 자(者)(32.13%), 임의(任意)로 계약(契約)하되 소유산림(所有山林) 전체(全體)를 일괄(一括) 계약(契約)하도록 하는 방법(方法)을 택(擇)하여야 한다는 자(者)(33.48%), 특정임지(特定林地)(신식지(新植地), 보조조림지(補助造林地), 고가임지(高價林地))는 의무적(義務的)으로 계약(契約)하도록 하여야 한다는 반응자(反應者)(31.92%)로 나타나 비슷한 반응(反應)을 보였다. 10. 보험료율(保險料率) 산림보험(山林保險) 요율(料率)은 지역(地域)에 따르는 위험정도(危險程度)를 참작(參酌)하여 면적비례(面積比例)로 결정(決定)하여야 한다는 의견(意見)(31.59%)과 지역(地域) 위험율(危險率)을 참작(參酌)하여 보험가액(保險價額)에 따라 정(定)해야 한다는 의견(意見)이 있었으나(31.59%), 우리 나라에는 지역적(地域的) 위험율(危險率)에 큰 차이(差異)가 없을 것이므로 전국(全國) 일률적(一律的)인 보험료(保險料)를 보험가액(保險價額)에 따라 정(定)하기를 원(願)하는 경향(傾向)이 높았다(39.55%). 11. 보험료(保險料)의 납부(納付) 산림보험료(山林保險料)는 단기(短期)는 일시불(一時拂), 장기(長期)는 매년(每年) 납부(納付)하게 하는 의견(意見)도 있으나(13.80%), 단기(短期)는 고율(高率), 장기(長期)는 저율(低率)로 하되 단기(短期), 장기(長期)를 막론(莫論)하고 매년(每年) 납부(納付)하도록 하여야 한다고 반응(反應)하였다(86.71%). 12. 보험사무(保險事務) 취급기관(取扱機關) 산림보험(山林保險) 사무(事務)의 취급(取扱) 즉(即) 창구업무(窓口業務)의 취급(取扱)을 산림행정기관(山林行政機關)에 위탁(委託)하거나(18.75%), 일반(一般) 보험회사(保險會社)에 맡기기보다는(35.76%) 산림조합(山林組合)에 위탁(委託) 취급(取扱)하게 하고 보험료(保險料)의 일정율(一定率)을 환부(還付)해주는 것이 좋다고 반응(反應)하였다(44.22%). 13. 손해보상(損害補償)의 한도(限度) 산림보험(山林保險)의 손해보상(損害補償)은 유령림(幼齡林)이 피해(被害)를 입었을 때에는 재조림비(再造林費)를 한도(限度)로 하여 보상(補償)하는 것을 원칙(原則)으로 하고 성림(成林)의 경우(境遇)에는 손해액(損害額)의 80%정도(程度)를 한도(限度)로 하여 보상(補償)하기 보다는(29.70%) 실손(實損) 현재가액(現在價額)을 보상(補償)하거나(31.07%) 조림비(造林費)의 복리계산(複利計算) 합계액(合計額)을 보상(補償)하는 것을 바라고 있었다(36.99%). 14. 보험기금(保險基金)의 조성(造成) 산림보험(山林保險)의 기금조성(基金造成)은 손해(損害) 보상액(補償額)에서 일정액(一定額)을 공제(控除) 적립(積立)하여 조성(造成)하거나(15.65%), 임야세(林野稅)를 신설(新設)하여 기금(基金)을 확보(確保)하기 보다는(33.79%), 산림보험(山林保險) 무사고(無事故)로 인(因)한 잉여금(剩餘金)에서 일정액(一定額)씩을 적립(積立)하여 산림보험기금(山林保險基金)으로 하자는 의견(意見)에 많은 반응(反應)을 하였다(44.81%). 15. 산화(山火)의 원인(原因) 산림관계직(山林關係職)에 종사(從事)하고 있는 사람들의 과거(過去)의 경험(經驗)에 비추어 본 우리나라 산화(山火)의 주요원인(主要原因)은 실화(失火)(원인불명(原因不明), 32.39%), 담배불(28.89%), 화전(火田)(19.85%)에 의한 것으로 나타났는데 산림통계(山林統計)에 나타나 있는 산화(山火)의 주요원인(主要原因)과 일치(一致)하였다. 16. 산화경방(山火警防) 산림화재(山林火災) 경방조치(警防措置)로서 가장 중요(重要)하고 실효성(實効性)이 있으며 실천(實踐)할 수 있는 삼대대책(三大對策)으로는 (1) 방화선(防火線) 설치(設置)(23.84%), (2) 건조기(乾燥期)의 입산금지(入山禁止)(21.10%), (3) 메스콤에 의한 계몽교육(啓蒙敎育)(18.01%)이라고 반응(反應)하였다.