• 대한음성학회지:말소리
• /
• 제27_28호
• /
• pp.27-56
• /
• 1994

Processes involving the change of vowel height are natural enough to be found in many languages. It is essential to have a better feature specification for vowel height to grasp these processes properly, Standard Phonology adopts the binary feature system, and vowel height is represented by the two features, i.e., [\pm high] and [\pm low]. This has its own merits. But it is defective because it is misleading when we count the number of features used in a rule to compare the naturalness of rules. This feature system also cannot represent more than three degrees of height, We wi31 discard the binary features for vowel height. We consider to adopt the multivalued feature [n high] for the property of height. However, this feature cannot avoid the arbitrariness resulting from the number values denoting vowel height. It is not easy to expect whether the number in question is the largest or not It also is impossible to decide whether a larger number denotes a higher vowel or a lower vowel. Furthermore this feature specification requires an ad hoc condition such as n > 3 or n \geq 2, whenever we want to refer to a natural class including more than one degree of height The altelnative might be Particle Phonology, or Dependency Phonology. These might be apt for multivalued vowel height systems, as their supporters argue. However, the feature specification of Particle Phonology will be discarded because it does not observe strictly the assumption that the number of the particle a is decisive in representing the height. One a in a representation can denote variant degrees of height such as [e], [I], [a], [a ] and [e ]. This also means that we cannot represent natural classes in terms of the number of the particle a, Dependency Phonology also has problems in specifying a degree of vowel height by the dependency relations between the elements. There is no unique element to represent vowel height since every property has to be defined in terms of the dependency relations between two or more elements, As a result it is difficult to formulate a rule for vowel height change, especially when the phenomenon involves a chain of vowel shifts. Therefore, we suggest a new feature specification for vowel height (see Chapter 3). This specification resorts to a single feature H and a few >'s which refer exclusively to the degree of the tongue height when a vowel is pronounced. It can cope with more than three degrees of height because it is fundamentally a multivalued scalar feature. This feature also obviates the ad hoc condition for a natural class while the [n high] type of multivalued feature suffers from it. Also this feature specification conforms to our expection that the notation should become simpler as the generality of the class increases, in that the fewer angled brackets are used, the more vowels are included, Incidentally, it has also to be noted that, by adopting a single feature for vowel height, it is possible to formulate a simpler version of rules involving the changes of vowel height especially when they involve vowel shifts found in many languages.

• Journal of Information Processing Systems
• /
• 제9권2호
• /
• pp.333-348
• /
• 2013

Mobile authentication/identification has grown into a priority issue nowadays because of its existing outdated mechanisms, such as PINs or passwords. In this paper, we introduce gait recognition by using a mobile accelerometer as not only effective but also as an implicit identification model. Unlike previous works, the gait recognition only performs well with a particular mobile specification (e.g., a fixed sampling rate). Our work focuses on constructing a unique adaptive mechanism that could be independently deployed with the specification of mobile devices. To do this, the impact of the sampling rate on the preprocessing steps, such as noise elimination, data segmentation, and feature extraction, is examined in depth. Moreover, the degrees of agreement between the gait features that were extracted from two different mobiles, including both the Average Error Rate (AER) and Intra-class Correlation Coefficients (ICC), are assessed to evaluate the possibility of constructing a device-independent mechanism. We achieved the classification accuracy approximately $91.33{\pm}0.67%$ for both devices, which showed that it is feasible and reliable to construct adaptive cross-device gait recognition on a mobile phone.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.768-771
• /
• 2006

In WSN(Wireless Sensor Network) environment, a large amount of sensors, which are small and heterogeneous, generates data stream successively in physical space. These sensors are composed of measured data and metadata. Metadata includes various features such as location, sampling time, measurement unit, and their types. Until now, wireless sensors have been managed with individual specification, not the explicit standardization of metadata, so it is difficult to collect and communicate between heterogeneous sensors. To solve this problem, OGC(Open Geospatial Consortium) has proposed a SensorML(Sensor Model Language) which can manage metadata of heterogeneous sensors with unique format. In this paper, we introduce a metadata model using SensorML specification to manage various sensors, which are distributed in a wide scope. In addition, we implement the metadata management module applied to the sensor data stream management system. We provide many functions, namely generating metadata file, registering and storing them according to definition of SensorML.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.213-218
• /
• 1991

A new model which contains the dynamics of the motor system and the kinematics of the timing belt system is derived for an inverted pendulum system in FAPA Lab. Generalized standard compensator configuration(SCC) which contains the variable design parameters Kl, K2, .., K5 is proposed so that any desired design specification can be achieved. The robust controller which has robust property against the influence of sensor noise, system parameter variation and model uncertainty is designed minimizing the H$_{\infty}$-norm of transfer function from exogenous input to controlled output. The method of solving the two Riccati equations in state space and determining the controller uses on iteration method where the unique stabilizing solution to two algebraic Riccati equation must be positive definite and the spectral radius of their product less than .gamma.$^{2}$. Some cases are derived by varying the design parameter for simulation on a digital computer and experimenting the H$_{\infty}$- controller on an analog computer. The design parameters of controller which satisfies the desired control specification is selected on the basis of the simulation result and experimenting. The reasonableness and validity of the simulation and the robustness of the controller is established.d.

• 한국통신학회논문지
• /
• 제18권9호
• /
• pp.1395-1403
• /
• 1993

프로토콜의 적합성시험은 컴퓨터 통신에서 상호운용성과 비용의 효율성을 높이기 위해서 매우 중요하다. 적합성 시험은 구현된 내용이 프로토콜 규격에 적합하게 구현되었는지를 검사하는 것으로, 그것의 효율성과 오류검출능력은 시험 항목의 생성방법에 의해서 결정된다. 프로토콜이 유한상태기계로 표현될때 한상태에 여러개의 UIO(Unique Input Output)순서들이 존재할 수 있으므로 이들중 가장 적합한 순서를 선정함으로서 시험 길이를 최소화 할 수 있다. 따라서 본 논문은 시험 길이를 최소화하기 위해서 여러개의 UIO순서들간에 존재하는 최대중복성을 찾기 위한 알고리즘을 깊이트리를 이용하여 구성하였고, 이 알고리즘을 이용하여 최소길이의 시험 순서를 생성하는 예를 보여주었다.

• 디지털산업정보학회논문지
• /
• 제8권3호
• /
• pp.11-22
• /
• 2012

GIS have expanded the use-range to the various application area with the advantage of interface environment, the various geographical operation. topological analysis by the friendly user. Early GIS software was developed as monolithic tool in which all functions packed in the same software. But, these GIS software have the problems of the high cost of constructing system, closely related system architecture and the reusability. And there is a lack of interoperability between them because most of them have their own unique data format according to their practical application fields. So Component is a unit that it is cohesive software package which is able to be developed and arranged independently and connected with another component for necessary system composition. In this paper, we analyze the requirements for component design and component specifications based on the extracted components. Commonly used to extract components from the requirements of the GPS component-based development process is presented. These components extracted by the process can be used to assemble components only. In particular, applications for developers to add features specific case without affecting the other components that can be modify the component.

• Progress in Superconductivity
• /
• 제11권1호
• /
• pp.19-24
• /
• 2009

Among the various types of fault current limiters, superconducting fault current limiters could be the most preferable choice for high voltage electric power systems owing to the remarkable current limiting characteristics of superconductors. But, there have been no commercial superconducting fault current limiters which were installed into actual electric power systems until these days due to some remained technical and economical problems. Thus, in order to promote the development and application of the superconducting fault current limiters into real field, it is essential to understand the power utilities’ requirements for their networks and also suitable test method and some specifications should be prepared. This paper focuses on the matters of test requirements and standardization issues that should be prepared for commercialization of superconducting fault current limiters. The unique current limiting characteristics of superconducting fault current limiters were investigated and related other standards including circuit breakers, transformers, reactors, power fuse, and fused circuit breakers were compared to setup the basis of novel specification of superconducting fault current limiters. Furthermore, required essential test procedures for superconducting fault current limiters were suggested.

• 식물분류학회지
• /
• 제37권4호
• /
• pp.351-361
• /
• 2007

In angiosperms, leaves typically develop as three-dimensional structure with dorsoventral, longitudinal, and lateral axes. We have shown that the control of two axes of leaves, longitudinal and lateral axis, can be genetically separable, and four classes of genes are responsible for the polar cell expansion and polar cell proliferation in Arabidopsis. In monocots, unifacial leaf, in which leaf surface consists only of abaxial identity, has been evolved in a number of divergent species. The unifacial leaves provide very unique opportunities for the developmental studies of the leaf axes formation in monocots, because their leaf polarities are highly disorganized. In addition, the mechanism of the parallel evolution of such drastic changes in leaf polarities is of interest from an evolutionary viewpoint. In this article, we describe our recent approaches to reveal the mechanism of unifacial leaf development and evolution, including recent advances in the leaf polarity specification in angiosperms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.165-167
• /
• 2006

In this paper we present a new-generation sensor network processor which is not optimized in circuit level, but in system architecture level. The new design build on a conventional processor architecture, improving the design by focusing on application oriented specification, ISA, and micro-architectural optimization that reduce overall design size and advance energy-per-instruction. The design employs harvard architecture, 8-bit data paths, and an compact 19 bit wide RISC ISA. The design also features a unique interrupt handler which offloads periodical monitoring jobs from the main part of CPU. Our most efficient design is capable of running at 300 KHz (0.3 MIPS) while consuming only about few pJ/instruction.

• Corrosion Science and Technology
• /
• 제6권2호
• /
• pp.68-73
• /
• 2007

The toxicity of chromium that is used to impart corrosion resistance to galvanized steel created environmental and health-related concerns and generated a great deal of interest in developing chrome-free treatment coatings. In the present work, organic-inorganic composite coatings were used to coat electrogalvanized steel (EG) sheets for corrosion protection without degrading its weldability property. The new coatings composed of specially modified polyurethane dispersion hybridized with silicate and unique inorganic-organic inhibitors were developed during this work. It was found that about $1{\mu}m$ thickness of coating layer is secure enough in corrosion resistance of flat and formed part even after alkaline degreasing. Overall chemical resistances including fingerprint resistance and paint adhesion property were satisfied with the test specification of Sony technical standard of SS-00260-2002. Therefore, it is concluded that the newly developed chrome-free product can replace the conventional chromated product.