• Korean Journal of Organic Agriculture
• /
• v.23 no.4
• /
• pp.659-682
• /
• 2015

This study was conducted to suggest ideal management system for organic materials. As the performing method of the study, surveyed results on understanding of related persons (organic farmer 846, organic materials manufacture 70 and Organic materials Auditors 7) with eco-friendly farming were used. And the opinion on unintentional pollution source contained in organic materials was surveyed additionally. The issues pointed out by organic farmers on product of organic materials were high price (60% to total), poor efficacy (16%), disorder on distribution system (13%) and containing chemicals as a pesticide (10%). And notification system for organic materials was accepted in general (positive and so so 76%) while most interviewees preferred (89%) unification of certification system dominantly. As unintentional contamination source, pollution on imported row material was indicated as major reason, and other causes were confirmed as insertion during manufacturing process, agricultural by-products using as product additive et al. Based on these surveyed results, authors suggest bellows as considerable methods for effective improvement of management system on organic material. First, establish new integrated certification system which contains standard of quality certification and notification system on organic material. Second, for evaluation of efficacy, apply relative evaluation system of significance such as Duncan's multiple test instead of existing absolute evaluation system. Third, constitute and operate selection of standard comparison subcommittee in organic Agro-materials committee in RDA.

• Korean Journal of Organic Agriculture
• /
• v.31 no.4
• /
• pp.309-325
• /
• 2023

GMO labeling system in South Korea stipulates three labeling methods: GMO labeling, no labeling and Non-GMO labeling. Products labeled as Non-GMO are not allowed for unintentional commingling of GMO without tolerance. However, consumers vary their acceptance of Non-GMO label on the unintentionally commingled products and willingness to pay according to the mixing rate, rather than devalue the whole products as useless. Additionally, consumers do not believe that the acceptable mixing rate should be discriminated between non-labeled products, which allow up to 3% of unintentional GMO contamination, and Non-GMO labeled products. Information on unintentional GMO mixing mainly refers to the mixing rate, but the Non-GMO content remaining even after commingling is also important information. The decline in value is alleviated when consumers are exposed to positive information, such as Non-GMO content, rather than when exposed to negative information, such as the mixing rate. Loss Aversion Coefficient is relative depending on whether the information representing the loss is positive or negative. Information that a Non-GMO labeled product contains X% GMO is more sensitive than information that (100-X)% Non-GMO remains.

• Applied Microscopy
• /
• v.38 no.4
• /
• pp.383-386
• /
• 2008

In performing in situ heating transmission electron microscopy (TEM) for materials characterizations, arising concerns such as specimen drifts and unintentional Cu contamination are discussed. In particular, we analysed the thermal and mechanical characteristics of in situ heating holders to estimate thermal drift phenomena. From the experimental results, we suggest an empirical model to describe the thermal drift behavior so that we can design an effective plan for in situ heating experiment. Practical approaches to minimize several hindrances arisen from the experiment are proposed. We believe that our experimental recommendations will be useful for a microscopist fascinated with the powerful potential of in situ heating TEM.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.4
• /
• pp.260-269
• /
• 2021

BACKGROUND: Diquat dibromide is a fast-acting nonselective herbicide and plant growth regulator. In this study, in order to understand the possibility of unintentional pesticide contamination in the following crops, the phytotoxicity and transition of diquat dibromide residue in soil into the following crops such as pepper, radish, lettuce and corn have been assessed through phytotoxicity trial and residual evaluation in the unintentional contamination of the higher residual diquat dibromide. METHODS AND RESULTS: The pepper, radish, lettuce and corn were cultivated in the sandy soil and loam soil where the 35 mg/kg and 90 mg/kg diquat dibromide were applied, respectively. Mild growth inhibition symptoms were observed in radish, lettuce and corn crops at the 90 mg/kg- diquat dibromide treatment on the 30 day of cultivation. Diquat dibromide was analyzed using liquid chromatography QTRAP (LC-MS/MS). The recovery rates of diquat dibromide from soil and crop were determined within range from 89.1 to 116.4% with relative standard deviation less than 14.7%. Diquat dibromide residues in soil were found to be 23.90-30.22 and 69.59-82.57 mg/kg from the 35 mg/kg and 90 mg/kg of diquat dibromide-treated soil, respectively after 30 days of crop cultivation. This result implicates that diquat dibromide did not convert to metabolites and remained mostly in the soil, even though it was partially decomposed during crop cultivation. In addition, the diquat dibromide in pepper and radish that were grown for 47 days, and lettuce and corn that were cultivated for 30 days were detected to be 0.01 mg/kg or less in the sandy loam and loam soil where the 90 mg/kg diquat dibromide was applied. CONCLUSION(S): Diquat dibromide did not cause severe phytotoxicity in the following crops as well as it did not uptake and distribute to the following crops, even though it was considered to be residual in the soil.

• Weed & Turfgrass Science
• /
• v.3 no.3
• /
• pp.221-224
• /
• 2014

Genetically modified (GM) crops are not permitted to be cultivated in Korea, but can only be imported as food or feed purposes. The import of GM crops has sharply increased in recent years, thus raising concerns with regard to the unintentional escape of these crops during transport and manufacturing as well as the subsequent contamination of local, non-GM plants. Hence, monitoring of GM crops was studied in or outside of grain receiving ports as well as from feed-processing plants in Korea during July 2008. We observed spilled maize grains and established plants primarily in storage facilities that are exposed around the harbors and near transportation routes of the feed-processing areas. Based on the PCR analyses, a total of 17 GM maize plants and 11 seeds were found among the samples. In most cases, the established maize plants found in this study were at the vegetative stage and thus failed to reach the reproductive stage. This study concludes that, in order to prevent a genetic admixture in the local environment for GM crops or seeds, frequent monitoring work and proper action should be taken.

• Korean Journal of Materials Research
• /
• v.32 no.12
• /
• pp.522-527
• /
• 2022

Among efforts to improve techniques for the chemical vapor deposition of large-area and high-quality graphene films on transition metal substrates, being able to reliably transfer these atomistic membranes onto the desired substrate is a critical step for various practical uses, such as graphene-based electronic and photonic devices. However, the most used approach, the wet etching transfer process based on the complete etching of metal substrates, remains a great challenge. This is mainly due to the inevitable damage to the graphene, unintentional contamination of the graphene layer, and increased production cost and time. Here, we report the systematic study of an H₂ bubbling-assisted transfer technique for graphene films grown on Cu foils, which is nondestructive not only to the graphene film but also to the Cu substrate. Also, we demonstrate the origin of the graphene film tearing phenomenon induced by this H₂ bubbling-assisted transfer process. This study reveals that inherent features are produced by rolling Cu foil, which cause a saw-like corrugation in the poly(methyl methacrylate) (PMMA)/graphene stack when it is transferred onto the target substrate after the Cu foil is dissolved. During the PMMA removal stage, the graphene tearing mainly appears at the apexes of the corrugated PMMA/graphene stack, due to weak adhesion to the target substrate. To address this, we have developed a modified heat-press-assisted transfer technique that has much better control of both tearing and the formation of residues in the transferred graphene films.

• Journal of Food Hygiene and Safety
• /
• v.36 no.3
• /
• pp.239-247
• /
• 2021

In order to confirm the impact of the Positive List System (PLS) being applied to all agricultural products from January 1, 2019, we analyzed 28,693 points of inspection-related data on agricultural products distributed in Gyeonggi-do from 2018 to 2020. The ratio of cases exceeding the standard for the total inspection performance was 1.0% in 2018, 1.2% in 2019, and 1.2% in 2020. Out of the 114 cases exceeding the standard in 2019, 55 were applied on a Maximum Residue Limit (MRL) of 0.01 mg/kg, and out of the 115 cases exceeding the standard in 2020, 66 were applied on a MRL of 0.01 mg/kg. To improve this, it seems necessary to manage unintentional pollution, conventional use for unregistered crops, and illegal pesticides. Fluquinconazole detection resulted from unintentional contamination, and diazinon, chlorothalonil, and methabenzthiazuron detection resulted from conventional use in unregistered crops. Chinomethionat is a pesticide component that was discarded in the past and its current use has been attributed to the smuggling of pesticides. This study and future monitoring data can be used as reference data for system supplementation and on-site management reinforcement.