• 한국통신학회논문지
• /
• 제31권3C
• /
• pp.237-244
• /
• 2006

본 논문에서는 2차원 결합 가우시안 Q-함수(Two-dimensional joint Gaussian Q-function)를 이용하여 AWGN(Additive White Gaussian Noise) 환경에서 M-PSK(M-ary Phase Shift Keying) 신호의 I/Q 위상 불균형(Phase unbalance) 존재 시 수치 적분이 필요 없는 정확하고 일반화된 closed-form 형태의 비트 오류율(Bit Error Rate) 표현을 유도한다. 새롭게 유도된 표현은 평균 BER 뿐만 아니라 k-번째 비트의 BER에 대하여도 일반화된 식으로 되어 있어 다양한 환경으로의 적용이 용이하여 M-PSK를 적용하는 많은 디지털 통신 시스템에서 복조 시 발생할 수 있는 I/Q 위상 불균형에 의한 시스템 성능 변화에 대하여 정확한 이론적 성능 기준을 제공할 것으로 기대된다.

• Environmental Engineering Research
• /
• 제25권4호
• /
• pp.498-505
• /
• 2020

This study analyzes the velocity and pressure incurred by protruding shapes installed within the inlet part of a pressurized membrane module during operation to determine the fluid flow distribution. In this paper, to find the flow distribution within a module, it investigates the velocity and pressure values at cross-sectional and outlet planes, and 9 sections classified on outlet plane using computational fluid dynamics. From the Reynolds number (Re), the fluid flow was estimated to be turbulent when the Re exceeded 4,000. In the vertical cross-sectional plane, shape 4 and 6 (round-type protrusion) showed the relatively high velocity of 0.535 m/s and 0.558 m/s, respectively, indicating a uniform flow distribution. From the velocity and pressure at the outlet, shape 4 also displayed a relatively uniform fluid velocity and pressure, indicating that fluid from the inlet rapidly and uniformly reached the outlet, however, from detailed data of velocity, pressure and flowrate obtained from 9 sections at the outlet, shape 6 revealed the low standard deviations for each section. Therefore, shape 6 was deemed to induce the ideal flow, since it maintained a uniform pressure, velocity and flowrate distribution.

• Journal of Biosystems Engineering
• /
• 제14권4호
• /
• pp.272-281
• /
• 1989

It is desirable for the vertical wind tunnel which can build uniform air flow across the vertical duct to be used for the purpose of the investigation of the aerodynamic properties of grains. This study was conducted to examine how the air velocity profile in the vertical duct is influenced by the various alternations of the elements of the wind tunnel, and to prepare design guidance of the vertical wind tunnel which can be used for investigating aerodynamic properties of grains. In addition, several tests were conducted to locate the test section which can be applicable for determining the terminal velocity of grain. The following conclusions were obtained from the study: 1. The size and the location of the outlet of the plenum chamber should be determined such that the outlet air flow is less affected by the air flow and the back pressure by the side wall of the chamber. 2. The honeycomb was not helpful for attaining uniform air flow in case that the air flow profile at the bottom of the vertical duct is serverely different from the ideal one. 3. Even though considerable pressure drop was resulted from the screens installed within the vertical duct, the screens were helpful for attaining uniform air flow in the duct. 4. It is desirable for the test section to be located at the position that not only the air flow of the duct is not disturbed by the distorted back pressure in the plenum chamber, but also less boundary layer is developed.

• 한국전자파학회논문지
• /
• 제28권8호
• /
• pp.670-677
• /
• 2017

본 논문에서는 바이스태틱 역합성 개구면 레이다(Bistatic ISAR: Bi-ISAR) 영상 형성에 적합한 회전운동보상(Rotational Motion Compensation: RMC) 기법을 제안한다. 이를 위해 추적된 표적의 궤적, 송신기, 수신기의 위치정보들을 이용하여 바이스태틱 각도 변화에 의해 기인된 기하학적 왜곡 현상을 보상한다. 다음으로, 관측각도의 변화율을 일정하게 하는 새로운 시간변수를 정의한 후, 보간법을 통해 기 정의된 시간 변수에 대한 레이다 신호를 획득함으로써 RMC를 수행한다. 이에 대한 결과로, Bi-ISAR 기하구조에서 표적의 비균일 회전성분을 적절히 보상함으로써 초점이 맞는 Bi-ISAR 영상을 획득할 수 있다. 바이스태틱 기하구조에서 기동하는 비행기 모델 시뮬레이션을 통해 본 논문에서 제안된 Bi-ISAR RMC 기법의 효용성을 검증하였다.

• 대한치과교정학회지
• /
• 제28권4호
• /
• pp.563-580
• /
• 1998

치열의 치군 후방이동을 유발하는 교정력에 의해 발생되는 개개 치아의 초기 변위와 응력분포를 평가하고자 본 연구를 시행하였다. 유한요소법을 이용하여 상악 치아와 치근막, 그리고 치조골의 해부학적 형태와 생체적 특성을 컴퓨터로 재현하고 모형화된 브라켓을 부착한 3 차원 유한요소 모델을 형성하였다. 치열의 치군 후방이동에 사용되는 구외력과 II급 악간고무, ideal arch wire와 MEAW(Multiloop Edgewise Arch Wire), 그리고 호선에 부여된 tip back bend 에 의해 야기되는 치아 변위를 비교, 분석하였다 그리고 이러한 치료방법을 상악 제 2 대구치를 발거한 경우와 발거하지 않은 경우에 각각 적용하여 상악 제 2대구치 존재유무에 따른 치아이동 양상의 변화를 분석한 결과 다음과 같은 결론을 얻었다. 1. 전치부 헤드기어에 의해 발생되는 치아변위는 후방 치체변위와 후방 경사변위, 그리고 수직변위 모두 치열 전방부에 집중되어 있었다. 2. Ideal arch wire에 II급 악간고무를 적용한 경우, 치아변위가 치열 전방부에 집중되었으나 ideal arch wire에 tip back bend를 부여하면 악간고무에 의한 견인력이 후방으로 전달되었다. 부여하는 tip back bend의 양이 증가할수록 전치부의 후방 치체변위와 설측 경사변위는 감소하였고 구치부의 후방 치체변위와 경사변위는 증가하였으며 II급 악간고무에 의한 전치부 정출이 감소하였다. 3. MEAW와 II급 악간고무를 적용한 결과, 치아변위 경향은 ideal arch wire와 II급 악간고무를 사용한 경우와 유사하였으나 작은 양의 치아변위와 함께 치열내 개개치아의 비교적 균등한 이동양상을 보였다. 4. 상악 제 2 대구치가 존재하는 유한요소 모델에 상악 제 1 대구치까지만 교정장치를 장착하고 후방이동을 시도한 결과 상악 제 1 대구치 치아이동이 감소하는 경향을 보였다.

• Structural Engineering and Mechanics
• /
• 제37권4호
• /
• pp.401-413
• /
• 2011

The aerodynamic stability of orthotropic tensioned membrane structures with rectangular plane is theoretically studied under the uniform ideal potential flow. The aerodynamic force acting on the membrane surface is determined by the potential flow theory in fluid mechanics and the thin airfoil theory in aerodynamics. Then, based on the large amplitude theory and the D'Alembert's principle, the interaction governing equation of wind-structure is established. Under the circumstances of single mode response, the Bubnov-Galerkin approximate method is applied to transform the complicated interaction equation into a system of second order nonlinear differential equation with constant coefficients. Through judging the stability of the system characteristic equation, the critical divergence instability wind velocity is determined. Finally, from different parametric analysis, we can conclude that it has positive significance to consider the characteristics of orthotropic and large amplitude for preventing the instability destruction of structures.

• Journal of applied mathematics & informatics
• /
• 제26권1_2호
• /
• pp.45-60
• /
• 2008

Here we consider the evaluation of the the dynamic component of the second order force due to wave diffraction by a circular cylinder analytically and numerically. The cylinder is fixed, vertical, surface piercing in water of finite uniform depth. The formulation of the wave-structure interaction is based on the assumption of a homogeneous, ideal, incompressible, and inviscid fluid. The nonlinearity in the wave-structure interaction problem arises from the free surface boundary conditions, namely, dynamic and kinematic free surface boundary conditions. We expand the velocity potential and free surface elevation functions in terms of a small parameter and then consider the second order diffraction problem. After deriving the pressure using Bernoulli's equation, we obtain the analytical expression for the dynamic component of the second order force on the cylinder by integrating the pressure over the wetted surface. The computation of the dynamic force component requires only the first order velocity potential. Numerical results for the dynamic force component are presented.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.172-175
• /
• 2003

Run-Out-Table is the region between EDT and CT. Hot killed strip is cooled by air and water in ROT. In this procedure, phase transformation and shape deformation occur due to temperature drop. Because of un-ideal cooling condition, deformation of strip and non-uniform phase distribution come into existence. This phenomenon affects the strip property and lead th the existence of residual stress. And it exerts effects on the Coiling process, Coil Cooling process, and Un-coiling process. Through these process, the residual stresses of strip are more larger and unbalance of these stresses become more severe. Finite element (FE) based models for the analysises of non-steady state heat transfer and elastoplastic deformation are described in this investigation. The analysises of thermodynamics and phase transformation kinetics are suggested also. Using the ROT simulation result coiling process and coil cooling process simulations are carried out.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 봄 학술발표회 논문집
• /
• pp.7-12
• /
• 1992

The variable node plate bending element, ie, the element with one or two additional mid-side nodes is used in the analysis of mat foundation to generate the nearly ideal grid model in which more nodes are defined near the column location. The plate bending element used in this study is the one based on Mindlin/Reissner plate theory with substitute shear strain field and the nodal stresses of that element are obtained by the local smoothing technique. The interaction of the soil material with the mat foundation is modeled with Winkler springs connected to the nodal points in the mat model. The vertical stiffness of the soil material are represented in terms of a modulus of subgrade reaction and are computed in the same way as to the computation of consistent nodal force of uniform surface loading. Several mesh schemes were proposed and tested to find the most suitable scheme for mat foundation analysis.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.594-597
• /
• 2006

Chloride ion penetration and carbonation are the most important factors in the durability problems of reinforced concrete structures. Most of the existing studies on those subjects are focused on the no-crack concrete, though the existence of crack may strongly affect the chloride ion penetration and carbonation. To evaluate the influence of crack on the chloride ion penetration and carbonation and to assess the service life of reinforced concrete more accurately, finite volume analyses (FVA) were performed based on the FV mesh containing the ideal crack whose width is uniform along the depth. Analytical results show that the influence of crack width and depth is much more pronounced for the chloride ion penetration than for the carbonation.