• 한국통신학회논문지
• /
• 제12권4호
• /
• pp.335-346
• /
• 1987

光纖維 內에서 後方散亂을 일으키는 주된 要因은 光纖維 構成物質의 密度 不均一과 코어變化에 의해 發生하는 Rayleigh散亂이다. 이 後方散亂에 의해 發生하는 後方散亂 光電力은 optical time domain reflectometer로 檢出할 수 있다. O.T.D.R. 시스템으로 檢出한 後方散亂 光電力은 光纖維 길이에 따른 電力減衰情報와 光纖維 코어의 直徑變化에 관한 情報들을 포함하고 있다 따라서 本 論文에서는 avalanche photodiode의 飽和狀態를 除去할 수 있는 2$\times$2fiber directional coupler와 S/N比를 增加시키는 gated integrato와 timing control circuit를 첨가하여 O.T.D.R. 시스템을 構成하였으며, 構成한 O.T.D.R 시스템으로 後方散亂 光電力을 檢出하여 光纖維 內 코어의 直徑變化를 測定하였다.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.139-144
• /
• 2005

Because of the photorefractive recording dynamics, each newly recorded hologram partially erases all previously stored image. Thus achieving the desired diffraction efficiency profile for the entire sequence after all images have been recorded requires exposure time schedule. The often cited classical exposure-schedule model predicts a rising-exponential build-up and an exponential decay in An with an exposure time. However because we cannot directly measure the An, it's difficult to establish the relation of both. In this paper, we deduce the relation of diffraction efficiency and exposure time from experiment data and suggest an algorithm to make time schedule profile in angle/fractal multiplexing of holographic data storage. After that, we present simulated result with equal hologram diffraction efficiency for a sequence of 250 holograms recorded by angle/fractal multiplexing.

• Ocean Systems Engineering
• /
• 제9권1호
• /
• pp.21-42
• /
• 2019

In this paper, the Finite-Analytic Navier-Stokes (FANS) code is coupled with an in-house finite-element code to study the dynamic interaction between a floating buoy and its mooring system. Hydrodynamic loads on the buoy are predicted with the FANS module, in which Large Eddy Simulation (LES) is used as the turbulence model. The mooring lines are modeled based on a slender body theory. Their dynamic responses are simulated with a nonlinear finite element module, MOORING3D. The two modules are coupled by transferring the forces and displacements of the buoy and its mooring system at their connections through an interface module. A free-decay model test was used to calibrate the coupled method. In addition, to investigate the capability of the present coupled method, numerical simulations of two degree-of-freedom vortex-induced motion of a CALM buoy in uniform currents were performed. With the study it can be verified that accurate predictions of the motion responses and tension responses of the CALM buoy system can be made with the coupling CFD-FEM method.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.708-720
• /
• 2020

Core-wide temperature distribution in sodium-cooled fast reactor plays a key role in its decay heat removal process, however the prediction for temperature distribution is quite complex due to the conjugate heat transfer between the assembly flow and the inter-wrapper flow. Hybrid medium model has been proposed for conjugate heat transfer modeling in the core. The core is modeled with a Realistic modeled inter-wrapper flow and hybrid medium modeled assembly flow. To validate present model, simulations for a three-assembly model were performed with Realistic modeling, traditional porous medium model and hybrid medium model, respectively. The influences of Uniform/Non-Uniform power distribution among assemblies and the Peclet number within the assembly flow have been considered. Compared to traditional porous medium model, present model shows a better agreement with in Realistic modeling prediction of the temperature distribution and the radial heat transfer between the inter-wrapper flow and the assembly flow.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.338-338
• /
• 2009

To date, rubbing has been widely used to align LC molecules uniformly. Although rubbing can be simple, it has fundamental problems such as the generation of defects by dust and static electricity, and difficulty in achieving a uniform LC alignment on a large substrate. Therefore, noncontact alignment has been investigated. Ion beam induced alignment method, which provides controllability, nonstop process, and high resolution display. We investigated the high pretilt angle effects on electro-optical properties of ion beam (IB)-irradiated liquid crystal cells. on a blended polymer surface. High pretilt angle of liquid crystals IB-irradiated on a blended polymer surface including such as 5% and 10% of homeotropic polymer contents can' be achieved. The threshold voltages of IB-irradiated twisted nematic (TN) cells on a blended polymer surface decrease with increasing the pretilt angle. Also, the rising time of IB-irradiated TN cells decreases with increasing the pretilt angle. However the decay time of IB-irradiated TN cells increases with increasing the pretilt angle. Consequently, the electro-optical properties of IB-irradiated TN cells depend strongly on the pretilt angle in a blended polymer surface.

• 한국산업융합학회 논문집
• /
• 제20권1호
• /
• pp.8-18
• /
• 2017

This research analyzed the ventilation effect of the multi-span greenhouse based on the types of greenhouse structure, weather conditions, and locations inside the greenhouse. To compare and analyze the ventilation effects with different types of greenhouse, the uniform environmental conditions should be selected in advance. But these factors are not controlled and require tense many precision facilities and labor forces. Thus, the CFD simulation was used for the air stream to be analyzed qualitatively and quantitatively. In addition, for the ventilation effect analysis, the TGD (Tracer Gas Decay) was used to overcome the shortcomings of the current ventilation measurement method. The calculation error of ventilation rate using TGD was low (10.5%). Thus, the TGD is very effective in calculating the ventilation efficiency. The wind direction of 90 degrees showed the best ventilation effect. The ventilation rate also decreased along the air circulation path, and the rate was the lowest around the outlet. The computed fluid method (CFD) turned out to be a power tool for simulating flow behavior in greenhouse.

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.196-205
• /
• 2019

Ni-rich layered oxides $Li(Ni_xCo_yMn_z)O_2$ (x + y + z = 1) have been extensively studied in recent times owing to their high capacity and low cost and can possibly replace $LiCoO_2$ in the near future. However, these layered oxides suffer from problems related to the capacity fading, thermal stability, and safety at high voltages. In this study, we use surface coating as a strategy to improve the thermal stability at higher voltages. The uniform and conformal $Al_2O_3$ coating on prefabricated electrodes using atomic layer deposition significantly prevented surface degradation over prolonged cycling. Initial capacity of 190, 199, 188 and $166mAh\;g^{-1}$ is obtained for pristine, 2, 5 and 10 cycles of ALD coated samples at 0.2C and maintains 145, 158, 151 and $130mAh\;g^{-1}$ for high current rate of 2C in room temperature. The two-cycle $Al_2O_3$ modified cathode retained 75% of its capacity after 500 cycles at 5C with 0.05% capacity decay per cycle, compared with 46.5% retention for a pristine electrode, at an elevated temperature. Despite the insulating nature of the $Al_2O_3$ coating, a thin layer is sufficient to improve the capacity retention at a high temperature. The $Al_2O_3$ coating can prevent the detrimental surface reactions at a high temperature. Thus, the morphology of the active material is well-maintained even after extensive cycling, whereas the bare electrode undergoes severe degradation.

• 한국컴퓨터정보학회논문지
• /
• 제27권1호
• /
• pp.83-89
• /
• 2022

협력 필터링은 추천 시스템의 대표적인 기법으로서 많은 상업 및 학계 시스템에서 성공적으로 구현되어 서비스되고 있다. 이 기법은 두 사용자 간의 공통 평가 항목에 대한 평가치의 유사성을 기반으로 유사한 이웃 사용자들이 높은 평가치를 부여한 항목들을 추천한다. 최근 사용자들의 항목 평가 시각을 반영하여 시스템 성능을 향상시키려는 시각 인지 추천 시스템 연구가 진행되고 있다. 그러나, 과거 평가치에 대한 일률적인 감쇠율은 시스템의 평가치 예측 성능을 저하시킬 우려가 있다. 본 연구에서는 기존과 다른 접근 방식으로서 평가 시각 인지 기반의 사용자 간 유사도 척도를 제안한다. 이 방법은 항목 평가 시각이 아닌 유사도값의 시간에 따른 변화를 고려한다. 제안 방법의 성능 평가를 위해 다양한 파라미터값과 시간 변화 함수 종류에 대하여 실험 평가를 진행하였으며, 기존의 전통적인 유사도 척도들의 예측 성능을 크게 향상시키는 결과를 나타냈다.

• Steel and Composite Structures
• /
• 제44권1호
• /
• pp.65-79
• /
• 2022

The main goal of this paper is to study the vibration of damaged core laminated annular plates with FG face sheets based on a three-dimensional theory of elasticity. The structures are made of a damaged isotropic core and two external face sheets. These skins are strengthened at the nanoscale level by randomly oriented Carbon nanotubes (CNTs) and are reinforced at the microscale stage by oriented straight fibers. These reinforcing phases are included in a polymer matrix and a three-phase approach based on the Eshelby-Mori-Tanaka scheme and on the Halpin-Tsai approach, which is developed to compute the overall mechanical properties of the composite material. In this study the effect of microcracks on the vibrational characteristic of the sandwich plate is considered. In particular, the structures are made by an isotropic core that undergoes a progressive uniform damage, which is modeled as a decay of the mechanical properties expressed in terms of engineering constants. These defects are uniformly distributed and affect the central layer of the plates independently from the direction, this phenomenon is known as "isotropic damage" and it is fully described by a scalar parameter. Three complicated equations of motion for the sectorial plates under consideration are semi-analytically solved by using 2-D differential quadrature method. Using the 2-D differential quadrature method in the r- and z-directions, allows one to deal with sandwich annular plate with arbitrary thickness distribution of material properties and also to implement the effects of different boundary conditions of the structure efficiently and in an exact manner. The fast rate of convergence and accuracy of the method are investigated through the different solved examples. The sandwich annular plate is assumed to have any arbitrary boundary conditions at the circular edges including simply supported, clamped and, free. Several parametric analyses are carried out to investigate the mechanical behavior of these multi-layered structures depending on the damage features, through-the-thickness distribution, and boundary conditions.

• 핵의학기술
• /
• 제16권2호
• /
• pp.12-17
• /
• 2012

방사성 요오드 치료병실에서 나온 환의 및 시트는 본디 방사성폐기물로서 관련 규정에 따라 일반 쓰레기와 동일하게 처리해야 하지만 사정상 일정기간 보관하여 방사능을 감쇄시킨 후 재사용하게 된다. 통상 최소보관기간 산출에 표면오염도(Bq/$m^2$)를 기반으로 하는 반출기준을 적용하고 있다. 하지만 방사선측정기를 이용하여 단위 면적당 총방사능량을 구하는 방법은 측정방법에 따라 편차와 불확실성이 상당히 커진다. 본 연구에서는 '방사성폐기물 자체처분 등에 관한 규정'에서 제시하고 있는 핵종 농도(Bq/g)를 Dose Calibrator를 이용하여 직접 측정하여 최소보관기간을 구함으로써, 환의 및 시트의 정확한 재사용 주기를 산출하고자 한다. 한편 반출기준으로 산출한 최소보관기간과 비교하여 그 차이를 살펴보았다. 본원의 방사성 요오드 치료병실에서 2011년 7월부터 2012년 3월까지 I-131을 3.7 GBq (100 mCi) 이상을 사용하여 방사성 요오드 치료를 시행한 환자 31명이 사용한 환의와 시트의 방사선 오염도를 측정하여 최소보관기간을 산출하였다. 최소보관기간은 핵종 농도를 측정하여 '방사성폐기물 자체처분 등에 관한 규정'에 따라 100 Bq/g이 되는 시점과 표면오염도를 측정하여 반출기준에 따라 허용표면오염도의 1/10, 즉 4 kBq/$m^2$되는 시점을 붕괴식에 대입하여 산출하였다. 반출기준으로 산출한 최소보관기간은 침대/담요시트는 14.2일, 베개시트는 4.6일, 환의(상(上))은 63일, 환의(하(下))는 78일 이었으며, 자체처분 기준에 따른 최소보관기간은 베개시트는 18.1일, 환의(상(上))은 43일, 환의(하(下))는 62일로 산출되었다. 표면오염도와 핵종 농도의 상관관계를 분석해 본 결과 베개시트와 환의(상(上))는 상관관계가 높게 나타났으나, 환의(하)는 낮게 나타났다. 이는 베개시트와 환의는 방사성오염이 부분에 국한 되어 측정값이 일정한 반면, 환의(하(下))는 소변에 의한 방사성오염이 여러 부분에 산재되어 있어 방사선측정기의 측정값이 상대적으로 낮게 측정된 결과로 생각 된다. 실질적으로 방사성 오염도를 측정한 결과 반출기준과 자체처분 기준을 상당량 초과하는 방사능이 존재하는 것을 확인할 수 있었다. 환의와 시트의 최소보관기간 산출에는 핵종 농도를 기준으로 하는 자체처분 기준을 적용하는 것이 더 적합하다고 할 수 있다. 방사능에 오염된 환의 및 시트는 최소 60일 정도는 보관해야 성급한 재사용에 따른 불필요한 방사선피폭 및 오염 확산을 방지할 수 있을 것으로 생각된다.