• Steel and Composite Structures
• /
• v.4 no.4
• /
• pp.265-280
• /
• 2004

In view of the mounting cost of rehabilitating deteriorating infrastructure, further compounded by intensified environmental concerns, it is now obvious that the evolvement and application of advanced composite structural materials to complement conventional construction materials is a necessity for sustainable construction. This study seeks alternative fill materials (polymer-based) to the much-limited cement concrete used in concrete-filled steel tubular structures. Polymers have been successfully used in other industries and are known to be much lighter, possess high tensile strength, durable and resistant to aggressive environments. Findings of this study relating to elasto-plastic characteristics of polymer concrete filled steel composite beams subjected to uniform bending highlight the enormous increase in stiffness, strength and ductility of the composite beams, over the empty steel tube. Moreover, polymer based materials were noted to present a wide array of properties that could be tailored to meet specific design requirements e.g., ductility based design or strength based design. Analytical formulations for design are also considered.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1172-1176
• /
• 2009

In the present study, natural convection over a heat sink with a horizontal circular base and rectangular fins was numerically analyzed. To calculate natural convection heat transfer, the assumptions of ideal gas and laminar flow were made for air. Flow patterns around the heat sink were chimney-like. The resultant temperature distribution on the circular base appeared almost uniform. Parametric studies were performed to compare the effects of fin length, fin height, the ideal number of fins, and heat flux on the average temperature of a heat sink and the average heat transfer coefficient from the heat sink array. Correlation to predict the average Nusselt number was presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.693-699
• /
• 2011

The outermost SG tubes have more structural problems than inside tubes. Many studies have used a uniform added mass coefficient for all of the SG tubes during the FIV analysis. The purpose of this study is to find out the added mass coefficients for each tube in a cylindrical shell. When a number of tubes are increased, added mass coefficients are also increased. And added mass coefficients at outermost tubes are less than those of inside tubes. According to gap changes between outermost tube and cylindrical shell, added mass coefficients are decreased with increasing the gap. When the gap has very large value, it shows that the added mass coefficient is asymptotically converged to the value of the tube array in a free fluid field.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.73-82
• /
• 1996

Vehicle movement detection by high order correlation analysis of optical sensor array signals is introduced. The optical sensors observe the road which is assumed to be a non-uniform speckle-like texture. The measurement system is applicable to general robotic movement detection because : 1) It employs a non-contact measurement method, 2) The system can be made very compact, and 3) It enables approximation of the movement trace with a sequence of arcs instead of the conventional connection of simple line segments. In this work, we have looked into estimation of running trace of an autonomous vehicle by observing the ground pattern.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.407-410
• /
• 2005

We report on a high speed flexible display based on a deformed helix ferroelectric liquid crystal (DHFLC) in a vertically aligned configuration. The mechanical stability of the flexible DHFLC display was achieved using a periodic array of columnar spacers formed directly on the top sides of in-plane electrodes by the photolithography technique. Several unique features of display performances such as flexibility, uniform alignment, fast response, and gray scale capability were obtained.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1207-1208
• /
• 2006

We developed the copper core ball electroplated with Sn-Ag-Cu of the eutectic composition which used mostly as Pb free solder ball with high reliability. In order to search for the practicality of this developed copper core ball, the evaluation was executed by measuring the initial joint strength of the sample mounted on the substrate and reflowed and by measuring the joint strength of the sample after the high temperature leaving test and the constant temperature and the humidity leaving test. This evaluation was compered with those of the usual other copper core balls electroplated with (Sn,Sn-Ag,Sn-Cu,Sn-Bi) and the Sn-Ag-Cu solder ball.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.199-202
• /
• 2002

This paper introduces the near field shading beamformer using widely known Chebyshev and Hanning window in the field of digital signal processing. The proposed shading beamformer improves the estimation of range as well as azimuth angle of targe residing in near field. A series of sensor weighting values are calculated from the FFT operation of given shading functions in time domain. This paper verifies the performance of the focused beamformer having the proposed shading sensor weights which are used to detect the range of target. Throughout computer simulations this paper exploits the performance improvement of the proposed shading beamformer as varying the frequency band of the received radiated signal along the non-uniform array.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.152-162
• /
• 1996

Diffraction gratings were designed to generate multiple beams for the real-time optical interconnection in free-space using a liquid crsytal television. Multi-level phase gratings consisted of stepped phase value, 0 to 2$\pi$, and generate a 5$\times$5 spot array, and V-shaped spot patterns which have a maximum diffraction efficiency of 78.84%. Simulated annealing technique was used to determine phase states of each pixel having uniform intensity and high diffraction efficiency. Through the optical interconnection experiments, we compared the diffraction characteristics of beam paterns obtained by binary-level, four-level, and eight-level phase gratings.

• The Korean Journal of Ceramics
• /
• v.3 no.1
• /
• pp.24-28
• /
• 1997

Diamond deposition by muti-cathode DC PACVD has been investigated. Five cathodes were independently connected to their own DC power supplies. The voltage and current of each cathods were varied up to 700 V and 3.5 A, respectively. The plasma formation and the diamond deposition behaviour on a substrate of 3 inch in diameter were investigated by optical emission spectroscopy, SEM and Raman spectroscopy. The plasma formed by five cathodes was non-uniform, which was depended on the geometry of cathods array. The growth rate and the quality of diamond film were closely related to the spatial distribution of the plasma.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.9
• /
• pp.375-379
• /
• 1986

The HCP(Hypocycloidal Pinch) device for plasma focus was modified for a pumping source of the dye laser, and the spectral distribution and time behavior of its light pulses were investigated by using a UV spectrometer, 70 MHz CRO and Si-PIN photodiode detector. An array of multiple stages of HCP and narrower electrode gaps were chosen in order to make a more uniform discharge along the HCP axis. The possible spectral range for the pumping of dye laser is 360-620nm, when the HCP is operated at 5-8kv of apllied voltage and 50-150Torr of Ar fill gas pressure. The rise-time and FWHM of light pulses from the HCP are 5us and 30-50us respectively when it is operated under the same conditions as above.