• 한국강구조학회 논문집
• /
• 제17권4호통권77호
• /
• pp.385-394
• /
• 2005

본 논문은 유전자알고리즘과 퍼지이론에 근거한 개선된 퍼지-유전자알고리즘에 의한 이산화 최적설계 프로그램을 개발하였다. 본 연구의 최적설계는 평면 및 입체 강구조물의 단면, 형상 최적설계가 동시에 수행된다. 본 연구에서 목적함수는 강구조물의 중량이고, 제약조건식은 설계 및 좌굴강도, 변위 및 부재단면의 두께에 대한 설계제한식이다. 설계변수는 철골부재 단면의 치수와 절점좌표이다. 그리고 본 연구의 개선된 퍼지-유전자 알고리즘에 의한 이산화 최적설계 프로그램의 적용을 위해 설계 예를 들었다.

• Structural Engineering and Mechanics
• /
• 제69권6호
• /
• pp.627-635
• /
• 2019

In order to study the axial compression performance of sand-lightweight concrete-filled steel tube (SLCFST) stub columns, three circular SLCFST (C-SLCFST) stub column specimens and three SLCFST square (S-SLCFST) stub column specimens were fabricated and static monotonic axial compression performance testing was carried out, using the volume ratio between river sand and ceramic sand in sand-lightweight concrete (SLC) as a varying parameter. The stress process and failure mode of the specimens were observed, stress-strain curves were obtained and analysed for the specimens, and the ultimate bearing capacity of SLCFST stub column specimens was calculated based on unified strength theory, limit equilibrium theory and superposition theory. The results show that the outer steel tubes of SLCFST stub columns buckled outward, core SLC was crushed, and the damage to the upper parts of the S-SLCFST stub columns was more serious than for C-SLCFST stub columns. Three stages can be identified in the stress-strain curves of SLCFST stub columns: an elastic stage, an elastic-plastic stage and a plastic stage. It is suggested that AIJ-1997, CECS 159:2004 or AIJ-1997, based on superposition theory, can be used to design the ultimate bearing capacity under axial compression for C-SLCFST and S-SLCFST stub columns; for varying replacement ratios of natural river sand, the calculated stress-strain curves for SLCFST stub columns under axial compression show good fitting to the test measure curves.

• Geomechanics and Engineering
• /
• 제34권6호
• /
• pp.683-696
• /
• 2023

The destruction and fracture of rock masses are crucial components in engineering and there is an increasing demand for the study of the influence of rock mass heterogeneity on the safety of engineering projects. The numerical manifold method (NMM) has a unified solution format for continuous and discontinuous problems. In most NMM studies, material homogeneity has been assumed and despite this simplification, fracture mechanics remain complex and simulations are inefficient because of the complicated topology updating operations that are needed after crack propagation. These operations become computationally expensive especially in the cases of heterogeneous materials. In this study, a heterogeneous model algorithm based on stochastic theory was developed and introduced into the NMM. A new fracture algorithm was developed to simulate the rupture zone. The algorithm was validated for the examples of the four-point shear beam and semi-circular bend. Results show that the algorithm can efficiently simulate the rupture zone of heterogeneous rock masses. Heterogeneity has a powerful effect on the macroscopic failure characteristics and uniaxial compressive strength of rock masses. The peak strength of homogeneous material (with heterogeneity or standard deviation of 0) is 2.4 times that of heterogeneous material (with heterogeneity of 11.0). Moreover, the local distribution of parameter values can affect the configuration of rupture zones in rock masses. The local distribution also influences the peak value on the stress-strain curve and the residual strength. The post-peak stress-strain curve envelope from 60 random calculations can be used as an estimate of the strength of engineering rock masses.

• 아태비즈니스연구
• /
• 제12권3호
• /
• pp.1-36
• /
• 2021

Purpose - This empirical study, aims to identify the determinants of adoption and acceptance of mobile payment as to understand why it is successful in some countries in Sub-Saharan Africa but failing in others. A comparative study of a successful mobile payment service and a purported failed one was done as to have some insights to the factors affecting acceptance of the technology. Design/methodology/approach - The strength of three notable theories: theory of diffusion of innovation (DOI), the extended unified theory of user acceptance of information technology (UTAUT2) and self-efficacy theory were use. The self-efficacy of government support inclusion as, a moderating variable in the form of infrastructure, securing transaction and price value revealed the relevance of government in the success of mobile payment service. By means of a field survey of 705 subjects in two separate regions of Africa (East and West), the data was collected and use to test the research model. Findings - The study result shows the importance of the moderating factor of government support to the success of mobile payment of any nation. The result also shows the importance of the perception of relative advantage, compatibility, complexity, social influence as already revealed by other studies. Research implications or Originality - Mobile payment success in some part of Sub-Saharan Africa is well known but also suggested to fail in some Sub-Saharan African countries. Buttressing the need for understanding of the factors affecting mobile payment acceptance. This article empirically examined the factors influencing the success of mobile payment, and we implicated that if the implementation of mobile payment is to be successful for mobile commerce in any nation, adoption, acceptance and use by its citizen is imperative.

• Steel and Composite Structures
• /
• 제31권1호
• /
• pp.13-25
• /
• 2019

Reactive powder concrete (RPC) is a type of ultra-high strength concrete that has a relatively high brittleness. However, its ductility can be improved by confinement, and the use of RPC in composite RPC filled steel tube columns has become an important subject of research in recent years. This paper aims to present an experimental study of axial capacity calculation of RPC filled circular steel tube columns. Twenty short columns under axial compression were tested and information on their failure patterns, deformation performance, confinement mechanism and load capacity were presented. The effects of load conditions, diameter-thickness ratio and compressive strength of RPC on the axial behavior were further discussed. The experimental results show that: (1) specimens display drum-shaped failure or shear failure respectively with different confinement coefficients, and the load capacity of most specimens increases after the peak load; (2) the steel tube only provides lateral confinement in the elastic-plastic stage for fully loaded specimens, while the confinement effect from steel tube initials at the set of loading for partially loaded specimens; (3) confinement increases the load capacity of specimens by 3% to 38%, and this increase is more pronounced as the confinement coefficient becomes larger; (4) the residual capacity-to-ultimate capacity ratio is larger than 0.75 for test specimens, thus identifying the composite columns have good ductility. The working mechanism and force model of the composite columns were analyzed, and based on the twin-shear unified strength theory, calculation methods of axial capacity for columns with two load conditions were established.

• Steel and Composite Structures
• /
• 제1권1호
• /
• pp.51-74
• /
• 2001

A series of tests on concrete-filled SHS (Square Hollow Section) stub columns (twenty), columns (eight) and beam-columns (twenty one) were carried out. The main parameters varied in the tests are (1) Confinement factor (${\xi}$) from 1.08 to 5.64, (2) concrete compression strength from 10.7MPa to 36.6MPa, (3) tube width to thickness ratio from 20.5 to 36.5. (4) load eccentricity (e) from 15 mm to 80 mm and (5) column slenderness (${\lambda}$) from 45 to 75. A mechanics model is developed in this paper for concrete-filled SHS stub columns, columns and beam-columns. A unified theory is described where a confinement factor (${\xi}$) is introduced to describe the composite action between the steel tube and filled concrete. The predicted load versus axial strain relationship is in good agreement with stub column test results. Simplified models are derived for section capacities and modulus in different stages of the composite sections. The predicted beam-column strength is compared with that of 331 beam-column tests with a wide range of parameters. A good agreement is obtained. The predicted load versus midspan deflection relationship for beam-columns is in good agreement with test results. A simplified model is developed for calculating the member capacity of concrete-filled SHS columns. Comparisons are made with predicted columns strengths using the existing codes such as LRFD (AISC 1994), AIJ (1997), and EC4 (1996). Simplified interaction curves are derived for concrete-filled beam-columns.

• 콘크리트학회지
• /
• 제10권4호
• /
• pp.113-124
• /
• 1998

축력과 면내 및 면외의 두방향 휨모멘트를 받는 철근콘크리트 벽체에 대한 비선형 해석연구를 수행하였으며 , 해석결과를 분석하여 벽체의 강도산정법을 유도하였다. 비선형 해석연구를 위하여 철근콘크리트 벽체에 대한 재료 및 기하학적 비선형 해석을 수행할 수 있는 유한요소 해석방법을 개발하였다. 철근콘크리트의 재료모델로서 소성이론과 파괴모델의 통합모델을 사용하였다. 철근콘크리트 벽체에 대한 해석결과를 토대로 단면의 응력분포를 이상화하였으며, 이를 이용하여 새로운 강도산정법을 개발하였다. 이 방법에 따르면, 면외 휨모멘트에 의하여 단위길이의 벽체가 지지할 수 있는 축력이 결정되며, 이 허용 단위 축력에 따라서 총 축력과 면내 휨모멘트의 상호관계곡선이 결정된다. 면외 휨모멘트가 증가할수록 축력과 면내 휨모멘트의 상호관계곡선이 축소되며 이는 벽체 강도의 감소를 가리킨다. 이 새로운 방법을 , 휨변형후에도 단면이 평면으로 유지된다는 가정을 사용하는 기존의 강도산정법과 비교한다. 이 비교결과에 따르면 , 새로운 방법에 비하여 기존의 방법은 면외 휨모멘크가 작은 영역에서 벽체의 강도를 과소평가하며, 면외 휨모멘트가 큰 영역에서는 벽체의 강도를 과대평가한다.

• 안보군사학연구
• /
• 통권8호
• /
• pp.239-270
• /
• 2010

This thesis is to make an appropriate national defense policy of Republic of Korea through studying the Hegemony Strategy of United States. I searched the theory of hegemony. The hegemony was differently defined by the point of time and region. The strong power nations with the hegemony have been making efforts to maintain their hegemony everytime. I have conclusion that the presence of hegemony once emerged, it brought regional stability in place whether it is coercive or beneficial. The stability and instability of international order IS not exclusively dependent on hegemony. Even if the safety of hegemony cannot guarantee absolute stability of international order, there IS on doubt that the hegemony has enormous impact on that. According to the hegemonic theory, the history of mankind equals to the history of rising and falling hegemony. The international order was changed as the hegemony changes. The United States has been making efforts to maintain her global hegemony during the post cold-war era as well. Taking all these into consideration, relevant military strategy direction able to pursue national interest is that to make up for the relative weakness in the strategic environment. South Korea have to prepare security policy response as following. First, South Korea should build the military force equipped with advanced weapons in military technology sector and solidify military diplomatic relation able to form cooperative relation in wartime. Second, South Korea should make solid Alliance of Korea and U.S. Third, develop and maintain multilateral security cooperation of East Asia. Forth, we could realize that there are means that can neutralize opponent's strong point by seeking one or two and more asymmetry in the aspect of strategy, tactics, and means through asymmetric strategy. Than the military force of South Korea should develop into a force that is able to overcome to the traditional North Korea's threat and new type of conflicts. And the force should have sufficient strength and be deployed to effectively defend the Korean Peninsula. So, we need to establish a denial and defense system against any hostile neighboring country. Therefore, ROK military forces preparing for the future should try to construct a future military power to gradually establish enough strength for self-defense to prepare for a uncertain security environment and when the Korean Peninsula is unified in a future.