• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.686-693
• /
• 2016

The analytical expressions for a partially coherent flat-topped vortex hollow beam propagating in uniaxial crystals orthogonal to the optical axis are derived, and the intensity and coherent vortex properties of partially coherent flat-topped vortex hollow beam propagation in uniaxial crystals orthogonal to the optical axis are analyzed by numerical examples. The influence of beam order parameter N, topological charge M, the coherence length and the ratio of refractive indices $n_e/n_o$ of uniaxial crystals on the normalized intensity distribution and coherent vortex of a partially coherent flat-topped vortex hollow beam propagating in uniaxial crystals are discussed in detail.

• 대한기계학회논문집A
• /
• 제30권9호
• /
• pp.1160-1165
• /
• 2006

In this paper, the 2-dimensional uniaxial force sensors array is introduced to detect the distributed force using fiber Bragg gratings. Uniaxial force transducer was designed to avoid the chirping and micro bending which degrade the performance of the sensor. The Brags wavelength shift of the sensor was estimated using the finite element analysis. Using this uniaxial force sensor, the uniaxial force sensors array $(3{\times}3)$ was fabricated, and the Performance of this sensors array was evaluated. The Presented sensors may has very simple configuration and its wiring is very simple compared with any other force sensors arrays.

• 한국지반환경공학회 논문집
• /
• 제15권2호
• /
• pp.53-58
• /
• 2014

암석의 일축압축강도와 탄성계수는 암반구조물의 설계에 있어 매우 중요한 해석 변수이다. 그러나 일축압축시험은 시험시편 준비가 어렵고 시간이 오래 걸린다. 그래서 기술자들은 해석변수를 예측하기 위해 초음파속도시험과 같은 실험을 이용한다. 본 연구를 위해 115개의 화성암, 74개의 변성암, 55개의 퇴적암을 대상으로 일축압축시험과 초음파시험을 수행하고 회귀분석하여 일축압축강도와 탄성계수의 관계식을 구하였다. 일축압축강도와 P파속도의 더 좋은 상관성을 구하기 위해 P파속도에 단위중량을 곱한 값을 이용하였다. 초음파속도를 이용하여 일축압축강도와 탄성계수를 구하는 관계식은 신뢰할 수 있는 결과를 얻을 수 있었다.

• 터널과지하공간
• /
• 제7권2호
• /
• pp.108-115
• /
• 1997

Uniaxial and biaxial compressive tests were conducted on limestone specimens containing artificial joints and a circular hole to investigate the influence of inclination and number of joints on compressive strength and deformation behavior of rock with a circular hole. Under uniaxial and biaxial compressive condition, the inclination of joints showing the maximum and minimum strength were 0$^{\circ}$ and 30$^{\circ}$ respectively, which was independent of the number of joints. Under uniaxial compressive condition, relative maximum strength of rock with n=1 and 3 to intact rock with a circular hole were 12.5%~82.8% and 11.4~62.5% respectively, and under biaxial compressive condition, 18.2~91.0% and 17.0~87.5% respectively. The influence of the number of joints on the decrease of compressive strength was greater under uniaxial than under biaxial compressive condition. Under uniaxial and biaxial compressive condition, axial and lateral deformations of rock showed the least values where $\alpha$=30$^{\circ}$. Under uniaxial compressive condition, axial and lateral deformation at maximum strength of rock have the increasing tendency with increase the number of joints. But they have the decreasing tendency under biaxial compressive condition. Under uniaxial and biaxial compressive conditions, axial deformation of circular hole was greater than lateral deformation without respect to the number of joints and the inclination of joints.

• 터널과지하공간
• /
• 제28권1호
• /
• pp.72-96
• /
• 2018

암반에서 공사를 수행하는 경우에는 공사의 안정성 확보를 위하여 대상 암반의 일축압축강도를 정확히 평가해야 한다. 그러나 일축압축강도를 산정하기 위해서는 많은 비용과 시간이 필요하다. 또한 현장에서는 암석의 일축압축강도시험을 수행할 수 없다는 문제점이 있다. 이러한 문제를 해결하기 위해 점하중강도 시험을 이용하여 암석의 일축압축강도를 산정하는 방법이 외국의 많은 연구자들에 의하여 조사되었다. 그러나 외국의 암석에서 얻어진 연구결과를 그대로 국내에서 적용하는 것은 신뢰성에 문제가 있을 수 있다. 본 연구에서는 국내 암석에 대한 점하중강도지수와 일축압축강도의 상관관계를 광범위한 국내 외 문헌조사와 실내시험 결과를 통하여 도표로 제시하였다. 본 연구결과는 국내 암석의 일축압축강도를 간편하고 신속하게 추정하는데 활용될 수 있을 것으로 기대된다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 추계학술발표논문집
• /
• pp.325-330
• /
• 2007

Uniaxial tensile test are generally much simpler than uniaxial compressive test. Uniaxial compressive test is experimentally more difficult because of the low buckling resistance of a sheet of paper. In order to avoid buckling, many researchers have applied various lateral restraint techniques to investigate paper uniaxial compression behavior. Adding unnecessary force to inhibit compressive deformation of the sheet is unwanted, but sufficient force must be used to inhibit buckling. This study has been carried out to develop new uniaxial compressive standard test method without exerting unnecessary force to paper specimen to prevent buckling.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.189-192
• /
• 2007

고무제품의 경우 구조성능평가를 위해 단축인장, 순수전단, 이축인장 및 압축시험을 수행한다. 일반적으로 단축인장시험값을 기초물성으로 사용하며 용도에 따라 다른 시험을 수행한다. 검증을 위해 단축인장시험/해석 결과를 비교하여 타당성을 확인했다. 본 연구에서는 전단강성이 주요인자인 제품의 성능평가를 위해 단축인장시험에서 획득한 물성을 적용한 QLS 해석모델의 결과를 비교, 검증하였다.

• Computers and Concrete
• /
• 제4권3호
• /
• pp.221-241
• /
• 2007

Based on the experiment results, the damage and fracture behavior of concrete at the ages of 1d, 2d, 7d and 28d, in three-point bending and uniaxial tensile tests, were simulated with a finite element program, ABAQUS. The critical stress intensity factor $K_{IC}^s$ and the critical crack tip opening displacement ($CTOD_C$) of concrete were calculated with effective-elastic crack approach for the three-point bending test of grade C30 concrete. Based on the crack band model, a bilinear strain-softening curve was derived to simulate the LOAD-CMOD curves and LOAD-Displacement curves. In numerical analysis of the uniaxial tension test of concrete of grade C40, the damage and fracture mechanics were combined. The smeared cracking model coupling with damaged variable was adopted to evaluate the onset and development of microcracking of uniaxial tensile specimen. The uniaxial tension test was simulated by invoking the damage plastic model which took both damage and plasticity as inner variables with user subroutines. All the numerical simulated results show good agreement with the experimental results.

• Geomechanics and Engineering
• /
• 제14권3호
• /
• pp.225-231
• /
• 2018

In this paper, in order to explain the splitting of cylindrical rock specimen under uniaxial loading, cracks in cylindrical rock specimen are divided into two kinds, the longitudinal crack and the slanting crack. Mechanical behavior of the rock is described by elastic-brittle-plastic model and splitting is assumed to suddenly occur when the uniaxial compressive strength is reached. Expression of the stresses induced by the longitudinal crack in direction perpendicular to the major axis of the crack is deduced by using the Maxwell model. Results show that the induced stress is tensile and can be greater than the tensile strength even before the uniaxial compressive strength is reached. By using the Inglis's formula and simplifying the cracks as slender ellipse, the above conclusions that drawn by using the Maxwell model are confirmed. Compared to shearing fracture, energy consumption of splitting seems to be less, and splitting is most likely to occur when the uniaxial loading is great and quick. Besides, explaining the rock core disking occurred under the fast axial unloading by using the Maxwell model may be helpful for understanding that rock core disking is fundamentally a tensile failure phenomenon.

• Elastomers and Composites
• /
• 제51권4호
• /
• pp.308-316
• /
• 2016

The rubber materials are widely used in automobile industry due to their capability of a large amount of elastic deformation under a force. Current trend of design process requires prediction of functional properties of parts at early stage. The behavior of rubber material can be modeled using strain energy density function. In this study, five different strain energy density functions - Neo-Hookean model, Reduced Polynomial $2^{nd}$ model, Ogden $3^{rd}$ model, Arruda Boyce model and Van der Waals model - were used to estimate the behavior of carbon black added natural rubber under uniaxial load. Two kinds of tests - uniaxial tension test and biaxial tension test - were performed and used to correlate the coefficients of the strain energy density function. Numerical simulations were carried out using finite element analysis and compared with experimental results. Simulation revealed that Ogden $3^{rd}$ model predicted the behavior of carbon added natural rubber under uniaxial load regardless of experimental data selection for coefficient correlation. However, Reduced Polynomial $2^{nd}$, Ogden $3^{rd}$, and Van der Waals with uniaxial tension test and biaxial tension test data selected for coefficient correlation showed close estimation of behavior of biaxial tension test. Reduced Polynomial $2^{nd}$ model predicted the behavior of biaxial tension test most closely.