• The Journal of the Acoustical Society of Korea
• /
• v.43 no.4
• /
• pp.400-405
• /
• 2024

When cavitation noise occurs in ship propellers, the level of underwater radiated noise abruptly increases, which can be a critical threat factor as it increases the probability of detection, particularly in the case of naval vessels. Therefore, accurately and promptly assessing cavitation signals is crucial for improving the survivability of submarines. Traditionally, techniques for determining cavitation occurrence have mainly relied on assessing acoustic/vibration levels measured by sensors above a certain threshold, or using the Detection of Envelop Modulation On Noise (DEMON) method. However, technologies related to this rely on a physical understanding of cavitation phenomena and subjective criteria based on user experience, involving multiple procedures, thus necessitating the development of techniques for early automatic recognition of cavitation signals. In this paper, we propose an algorithm that automatically detects cavitation occurrence based on simple statistical features reflecting cavitation characteristics extracted from acoustic signals measured by sensors attached to the hull. The performance of the proposed technique is evaluated depending on the number of sensors and model test conditions. It was confirmed that by sufficiently training the characteristics of cavitation reflected in signals measured by a single sensor, the occurrence of cavitation signals can be determined.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.9
• /
• pp.3639-3662
• /
• 2020

The network capability to accomplish its functions in a timely fashion under failures and attacks is known as survivability. Ad hoc routing protocols have been studied and extended to various domains, such as Intelligent Transport Systems (ITSs), Unmanned Aerial Vehicles (UAVs), underwater acoustic networks, and Internet of Things (IoT) focusing on different aspects, such as security, QoS, energy. The existing solutions proposed in this domain incur substantial overhead and eventually become burden on the network, especially when there are fewer attacks or no attack at all. There is a need that the effectiveness of these routing protocols be analyzed in the presence of Denial of Service (DoS) attacks without any intrusion detection or prevention system. This will enable us to establish and identify the inherently stable routing protocols that are capable to survive longer in the presence of these attacks. This work presents a DoS attack case study to perform theoretical analysis of survivability on node and network level in the presence of DoS attacks. We evaluate the performance of reactive and proactive routing protocols and analyse their survivability. For experimentation, we use NS-2 simulator without detection or prevention capabilities. Results show that proactive protocols perform better in terms of throughput, overhead and packet drop.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.237-240
• /
• 2000

본 연구에서는 한국 동해 대륙붕 해역에서의 주요 해양현상인 수직 수온구조의 단기변동, 수온전선, 그리고 내부파의 변동을 분석하고 이들 변화에 따른 음파의 음장변화를 고찰하였다. 한국 동해항 근해에서 수온의 수직적 변화는 계절적인 변화 이외에 약 2주간의 짧은 기간에도 매우 극적인 변화가 존재함이 실측자료를 통해 밝혀졌다. 1999년 관측된 CTD 자료를 바탕으로 음장 변화를 살펴본 결과 주파수 1kHz, 음원수심 $30{\cal}m$ 인 경우 수신기 수심에 따라 최소 3dB, 최대 10dB까지 차이를 가져올 수 있음을 알 수 있었다. 한국 동해에서 연안과 외해 사이에는 수온전선이 매우 자주 발달하며 여름에 가장 강한 것으로 알려져 있다. 동해항 근해에는 대표적인 수괴인 대마난류수와 북한한류수가 공존하며 이들의 상대적인 세력 변화 때문에 수은(음속)이 거리에 따라 급격하게 변하는 수온전선이 발달할 수 있다. 저주파수 대역 (200Hz)에 대한 간단한 시뮬레이션 결과는 수온전선이 정상적인 분포에 비해서 거리에 따라 7dB 정도의 큰 전파손실을 초래할 수 있음을 보인다. 한국 동해 연안에도 내부파가 존재한다는 사실이 최근 3년간의 연구 결과 밝혀졌다. 내부파는 외해에서 발생하여 대륙단을 거쳐 대륙붕으로 진행해 오면서 내부파 군 (Packets)으로 분산된다. 수직적 변화가 전체 수층의 $14\%$를 차지하는 간단한 형태의 내부파를 가정하여 음장변화를 시물레이션 한 결과 주파수 1 kHz, 음원수심 $20{\cal}m$인 경우 내부파는 수렴구역 형성을 현저하게 방해하여 최대 5dB까지의 차이를 유발하였다. 추후 이에 대한 연구는 내부파 전체의 시,공간적 분포 특성이 구체적으로 규명되면 보다 정확한 음장변화 추정이 이뤄져야 할 것으로 보인다. 또한 내부파와 음파의 상대적인 진행 방향에 따라 음장변화가 크게 다를 것이 예상되므로 이를 규명하기 위해서는 궁극적으로 3차원적인 음장분포 연구가 필요하다. 음향센서를 해저면에 매설할 경우 수충의 수온변화와 센서 주변의 수온변화 사이에는 어느 정도의 시간지연이 존재하게 되므로 이에 대한 영향을 규명하는 것도 센서의 성능예측을 위해서 필요하리라 사료된다.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.6
• /
• pp.419-424
• /
• 2017

TDoA (Time Difference-of Arrival) or DoA (Direction-of-Arrival) can be used for source localization. However, the localizing performance is dependent on relative position between source and receivers, receivers' geometric structure, sound speed, and so on. In this paper we propose a source localization method with enhanced performance that combines multiple information. The proposed method uses the time TDoA, DoA and sound speed as variables. LM (Levenberg-Marquardt) method which is one of nonlinear optimizations is applied. The performances of the proposed method was evaluated by simulation. As result of simulation, the proposed method has the lower average localizing error performance than the previous method.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.38-46
• /
• 2020

LOw Frequency Analysis Recording (LOFAR) and Demodulation of Envelop Modulation On Noise (DEMON) grams are bearing-time-frequency plots of underwater acoustic signals, to visualize features for passive sonar. Those grams are characterized by tonal components, for which conventional data coding methods are not suitable. In this work, a novel LOFAR/DEMON gram compression algorithm based on binary map and prediction methods is proposed. We first generate a binary map, from which prediction for each frequency bin is determined, and then divide a frame into several macro blocks. For each macro block, we apply intra and inter prediction modes and compute residuals. Then, we perform the prediction of available bins in the binary map and quantize residuals for entropy coding. By transmitting the binary map and prediction modes, the decoder can reconstructs grams using the same process. Simulation results show that the proposed algorithm provides significantly better compression performance on LOFAR and DEMON grams than conventional data coding methods.

• 대한공업교육학회지
• /
• v.35 no.2
• /
• pp.224-237
• /
• 2010

When the underwater structure sails high speed, noise and vibration propagate to the sensor in the nose of the dome. In this paper, to avoid this kind of noise and vibration CRP(Carbon Reinforced Plastic) material and SNORE ring(Self-NOise REduction Ring) are attached at the curved structure and simulates its isolation characteristics using commercial software. Vibration displacement and stress are calculated at the planar sensor array. The material of the curved structure is aluminum and maximum outer diameter is 53Omm, 215mm in length, 270mm in planar diameter, respectively. Based on the simulation results, reduction ratio of the received normal stress at the sensor is above 95% at the frequency of 12kHz and 15kHz. At the mid point of the planar sensor the normal stress is higher than 20mm and 40mm apart. This results can be used to increase the sensitivity of the acoustic sensor as a basic data.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.31-36
• /
• 2001

Passive sonar system forms the various beams in any desired directions to obtain the improvement in Signal-to-Noise (S/N) ratio, bearing detection and localization of targets, and the attenuation of interferences from other directions. The improvement of beamforming is very important to detect modern underwater targets as noise reduction technology leads to considerably low-level acoustic emissions in the long range in complex environmental sea. In this paper, we proposed the spatial cross correlation beamforming (SCCBF) algorithm using cross correlation matrix of individual hydrophone pairs of linear array sensors. By the theoretical analysis and simulation, the proposed SCCBF is demonstrated that its performances compared to conventional beamforming (CBF) output can be obtain above 3dB of array gain and about half of beam width represented the bearing accuracy in target detection. Also, this paper presents sea test result of linear passive sonar system that the proposed algorithm implemented.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.8
• /
• pp.570-575
• /
• 2004

In the underwater acoustic systems. we can receive signals and retrieve information about a target by using a beamforming method. The most important thing in the beamforming is finding the way to optimize the mainlobe beamwidth and the sidelobe level to the desired value. One of the prominent results of beamforming method. which has been studied. is Philip's weighting function method(1) . Philip's method adaptively adjusts its weights of array to meet the desired mainlobe beamwidth and sidelobe level. It is very similar to the design method in adaptive filter. However. this method cannot easily bring us to the desired sidelobe level due to complementary relation between mainlobe beamwidth and sidelobe level. In this paper, we propose a new algorithm using partial constrained adaptation. This method makes us circumvent the above problem and meet the specification of design easily. The proposed algorithm presents a Pattern synthesis that designer can easily control the mainlobe beamwidth and the sidelobe level to the desired value while calculation time to converge is decreasing.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.455-471
• /
• 2013

Active sonar has been commonly used to detect targets existing in the shallow water. When a signal is transmitted and returned back from a target, it has been distorted by various properties of acoustic channel such as multipath arrivals, scattering from rough sea surface and ocean bottom, and refraction by sound speed structure, which makes target detection difficult. It is therefore necessary to consider these channel properties in the target signal simulation in operational performance system of active sonar. In this paper, a monostatic active sonar system is considered, and the target echo, reverberation, and ambient noise are individually simulated as a function of time, and finally summed to simulate a total received signal. A 3-dimensional highlight model, which can reflect the target features including the shape, position, and azimuthal and elevation angles, has been applied to each multipath pair between source and target to simulate the target echo signal. The results are finally compared to those obtained by the algorithm in which only direct path is considered in target signal simulation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.3
• /
• pp.276-280
• /
• 2016

This study investigated luring distributions by water layer of common squid which were targeted by angling fishing vessels equipped with LED and metal-halide lamps using a scientific echosounder with a 120 kHz frequency in order to develop energy-effective underwater fish aggregation devices. In the analysis, angles of a transducer were changed from $0^{\circ}$ to $45^{\circ}$ and were rotated every $10^{\circ}$ horizontally. It was shown that common squid were densely distributed from the surface to 40 m and they were also distributed in directions of $10^{\circ}{\sim}+30^{\circ}$, $-30^{\circ}{\sim}-60^{\circ}$, and $-120^{\circ}{\sim}-130^{\circ}$with the head of vessel as the center. Comparative results of angles of transducer on acoustical densities of common squid distributing in 21~40 m water depth showed an average $101.8m^2/nm^2$ in vertical direction of $0^{\circ}$, $12.3m^2/nm^2$ in angle of $30^{\circ}$, and $42.4m^2/nm^2$ in angle of $45^{\circ}$, respectively. It implied that more considerations on acoustic scattering strength by incidence angle direction of the transducer and swimming oriental angle direction of common squid would be required.