• 한국정밀공학회지
• /
• 제32권8호
• /
• pp.705-711
• /
• 2015

Five-Axis machines can generate undesirable defects such as the undercutting and overcutting errors that frequently occur in the three-axis machining process. It is therefore necessary to develop a program for NC-code generation, whereby the cutter posture is considered to decrease the occurrence of defects. In previous studies, the Easy-Impeller CAM(E-ICAM), an automatic CAM program used for the five-axis machining of impellers, was developed; however, when E-ICAM is used to machine an impeller, it is possible to gouge the hub and blade. Therefore, the aim of this study is the establishment of a formula for each type of endmill to minimize gouging according to the cutter posture, in consideration of several factors that affect accuracy in the machining of an impeller. This study also aimed to improve the performance and accuracy of E-ICAM in the manufacturing of impellers.

• 해양환경안전학회지
• /
• 제5권2호
• /
• pp.15-26
• /
• 1999

The marine structures with sea water cooling system always expose to the oceanic atmosphere. Therefore, the protection of the equipments is very important. To investigate the effectiveness of advanced composite materials for the application in offshore environments, the tensile test, hardness test, undercutting property test, permeance test and the friction and wear test were carried out by using various applicable coating materials. The main results obtained can be summarized as follows; 1. The micro-hardness of the Archcoat 502B showed the highest value. 2. The coefficient of friction of the Rigspray coating at the speed of 2.21m/sec showed the lowest value, and that of the Archcoat 502B coating at 1.08m/sec and 0.18m/sec indicated the lowest values. 3. The wear mass at the speed of 0.18m/sec and 1.08m/sec in dry condition showed the smallest values. 4. The Archcoat 502B coating is fitted to the dynamic instruments in the range of low speed and middle speed. Rigspray coating is fitted to the dynamic instruments in the range of high speed. 5. The wear mass of five kinds of coating materials at the range of low speed was very small, and those of the Archcoat S02B, Archcoat 402B and Rigspray coating at high speed range were quitely smaller than those of the Modified Epoxy and Tar Epoxy.

• 한국조경학회지
• /
• 제21권2호
• /
• pp.107-119
• /
• 1993

This study was conducted to increase to increase the plant species diversity, which was based on the analysis of plant community structure and the survey of human's disturbance degree in Mt. Yongma and Mt. Acha urban nature park, Seoul. The plant community were divided into four groups by TWINSPAN and DCA. These groups were Pinus rigida-P. densiflora community, Quercus mongolica-Q.aliena-Q.accutissima community, Robinia pseudoacaia-Q.accutissima-Poplus${\times}$albaglandulosa community and R.pseudoacacia community. The successional trends of tree species seems to be from P.densiflora, P.rigida, Sorbus alniflora to Q.mongolica, Q.aliena and from P.${\times}$albaglandulosa, R.pseudoacacia, through Q.accutissima, to Q. mongolica, Q.aliena. The species diversity of plant community was high in natual plant community but was low in artificial planting community respectively. Number of species, number of species individuals, indices of species diversity was lowered and soil hardness was increased by the user's trampling, undercutting work and planting P.koraiensis after thinning. In the basis of study results, we proposed the management plan for the urban forest.

• Journal of Korean Neurosurgical Society
• /
• 제56권3호
• /
• pp.206-210
• /
• 2014

Objective : Lumbar spinal stenosis is a common degenerative spine disease that requires surgical intervention. Currently, there is interest in minimally invasive surgery and various technical modifications of decompressive lumbar laminectomy without fusion. The purpose of this study was to present the author's surgical technique and results for decompression of spinal stenosis. Methods : The author performed surgery in 57 patients with lumbar spinal stenosis between 2006 and 2010. Data were gathered retrospectively via outpatient interviews and telephone questionnaires. The operation used in this study was named central decompressive laminoplasty (CDL), which allows thorough decompression of the lumbar spinal canal and proximal two foraminal nerve roots by undercutting the lamina and facet joint. Kyphotic prone positioning on elevated curvature of the frame or occasional use of an interlaminar spreader enables sufficient interlaminar working space. Pain was measured with a visual analogue scale (VAS). Surgical outcome was analyzed with the Oswestry Disability Index (ODI). Data were analyzed preoperatively and six months postoperatively. Results : The interlaminar window provided by this technique allowed for unhindered access to the central canal, lateral recess, and upper/lower foraminal zone, with near-total sparing of the facet joint. The VAS scores and ODI were significantly improved at six-month follow-up compared to preoperative levels (p<0.001, respectively). Excellent pain relief (>75% of initial VAS score) of back/buttock and leg was observed in 75.0% and 76.2% of patients, respectively. Conclusion : CDL is easily applied, allows good field visualization and decompression, maintains stability by sparing ligament and bony structures, and shows excellent early surgical results.

• 센서학회지
• /
• 제9권3호
• /
• pp.177-181
• /
• 2000

턴널링 전류는 전극사이의 거리에 지수적으로 비례한다. 따라서 턴널링 전류의 변화측정을 통하여 전극간격의 미세변위를 측정할 수 있다. 본 실험에서는 micro-tip과 membrane사이에 턴널링 전류가 흐르는 피라미드형 실리콘 턴널링소자를 micro-electro-mechanical systems (MEMS) 공정을 이용하여 제조하였다. 단결정 실리콘을 KOH 용액안에서 이방성 에칭 시켜 micro-tip을 제조하였으며, 이때 $SiO_2$막을 마스크로 사용하였다 $Si_3N_4$막으로 membrane을 형성하였다. 마스크 방향에 따른 에칭 진행과정의 차이를 조사하였으며 membrane으로 사용한 $Si_3N_4$막의 stiffness를 측정하였다. 실험으로 측정하기 어려운 영역의 $Si_3N_4$막 stiffness 예측을 위한 모델식을 제시하였다.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 1997년도 학술대회
• /
• pp.164-166
• /
• 1997

MR arthrography is a useful modality for evaluating the labrocapsular ligamentous complex(LOLC) of the shoulder. This study was performed to describe normal anatomic variations and pitfalis in image interpretation related to evaluation of the LOLC. MR Arthrogram of 56 shoulders in 41 asymptomatic young, active volunteers were prospectively reviewed to evaluate the labral shapes. capsular insertions and images which may mimic the lesions of glenohumoral instability. The anterior and posterior parts of the labra. respectively. varied in shape: triangular$(72\%,\; 36\%)$. round $(13\%,\; 35\%)$. cleaved$(8\%,\; 1\%)$. notched$(2\%,\; 0\%)$. flat$(5\%,\; 24\%)$ and absent$(0\%,\; 4\%)$. The anterior and posterior capsular insertions. respectively. varied in sites: Mosely and Oevergaard type I$(82\%,\;62\%)$, type II$(13\%,\; 3\%)$ and type III $(5\%,\; 2\%)$. A number of pitfalls in image interpretation were discovered. Articular cartilage undercutting the labrum$(29\%)$ and middle glenohumoral ligament in proximity to anterior labrum $(5\%)$ simulated a labral tear. Joint fluid interposed in the central. superior portion of the sublabral sulci$(25\%)$ simulated a SLAP lesion. Synovial fold$(38\%)$ in axillary pouch resembled a loose body. Knowledge of normal variations and pitfalls in MR arthrogram image interpretation of labral capsular - ligamentous complex will help the orthopedist to accurately detect debilitating derangements associated with the glenohumeral instability.

• Restorative Dentistry and Endodontics
• /
• 제38권4호
• /
• pp.215-221
• /
• 2013

Objectives: To determine the retentive strength and failure mode of undercut composite post, glass fiber post and polyethylene fiber post luted with flowable composite resin and resin-cement. Materials and Methods: Coronal parts of 120 primary canine teeth were sectioned and specimens were treated endodontically. The teeth were randomly divided into 6 groups (n = 20). Prepared root canals received intracanal retainers with a short composite post, undercut composite post, glass fiber post luted with flowable resin or resin-cement, and polyethylene fiber post luted with flowable resin or resin-cement. After crown reconstruction, samples were tested for retentive strength and failure mode. Statistical analysis was done with one-way ANOVA and Tukey tests (p < 0.05). Results: There were statistically significant differences between groups (p = 0.001). Mean bond strength in the undercut group was significantly greater than in the short composite post (p = 0.030), and the glass fiber post (p = 0.001) and the polyethylene fiber post group luted with resin-cement (p = 0.008). However, the differences between the undercut group and the groups with flowable composite as the luting agent were not significant (p = 0.068, p = 0.557). Adhesive failure was more frequent in the fiber post groups. Conclusions: Although the composite post with undercutting showed the greatest resistance to dislodgement, fiber posts cemented with flowable composite resin provided acceptable results in terms of retentive strength and fracture mode.

• Journal of Korean Neurosurgical Society
• /
• 제64권4호
• /
• pp.575-584
• /
• 2021

Objective : Cervical expansive laminoplasty is an effective surgical method to address multilevel cervical spinal stenosis. During surgery, the spinous processes of C2 and C7 are usually preserved to keep the insertion points of the cervical musculature and nuchal ligament intact. In this regard, dome-like laminectomy (undercutting of C7 lamina) instead of laminoplasty is performed on C7 in selected cases. However, resection of the lamina can weaken the C7 lamina, and stress fractures may occur, but this complication has not been characterized in the literature. The objective of the present study was to investigate the incidence and risk factors for C7 laminar fracture after C7 dome-like laminectomy and its impact on clinical and radiological outcomes. Methods : Patients who underwent cervical open-door laminoplasty combined with C7 dome-like laminectomy (n=123) were classified according to the presence of C7 laminar fracture. Clinical parameters (neck/arm pain score and neck disability index) and radiologic parameters (C2-7 angle, C2-7 sagittal vertical axis, and C7-T1 angle) were compared between the groups preoperatively and at postoperatively at 3, 6, 12, and 24 months. Risk factors for complications were evaluated, and a formula estimating C7 fracture risk was suggested. Results : C7 lamina fracture occurred in 32/123 (26%) patients and occurred at the bilateral isthmus in 29 patients and at the spinolaminar junction in three patients. All fractures appeared on X-ray within 3 months postoperatively, but patients did not present any neurological deterioration. The fracture spontaneously healed in 27/32 (84%) patients at 1 year and in 29/32 (91%) at 2 years. During follow-up, clinical outcomes were not significantly different between the groups. However, patients with C7 fractures showed a more lordotic C2-7 angle and kyphotic C7-T1 angle than patients without C7 fractures. C7 fracture was significantly associated with the extent of bone removal. By incorporating significant factors, the probability of C7 laminar fracture could be assessed with the formula 'Risk score = 1.08 × depth (%) + 1.03 × length (%, of the posterior height of C7 vertebral body)', and a cut-off value of 167.9% demonstrated a sensitivity of 90.3% and a specificity of 65.1% (area under the curve, 0.81). Conclusion : C7 laminar fracture can occur after C7 dome-like laminectomy when a substantial amount of lamina is resected. Although C7 fractures may not cause deleterious clinical outcomes, they can lead to an unharmonized cervical curvature. The chance of C7 fracture should be discussed in the shared decision-making process.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.46-46
• /
• 2011

Severe sediment erosion during floods occur disaster and economic losses, but general sediment erosion is basic mechanism to move sediment from upstream to downstream river. In addition, it is important process to change river form. Check dam, which is constructed in mountain stream, play a vital role such as control of sudden debris flow, but it has negative aspects to river ecosystem. Now a day, check dam of open type is an alternative plan to recover river biological diversity and ecosystem through sediment transport while maintaining the function of disaster control. The purpose of this paper is to verify sediment erosion progress of river bottom and bank as first step for river restoration after dam slit by cross-sectional shear stress and critical shear stress. Study area is upstream reach of slit check dam in mountain stream, named Wasada, in Japan. The check dam was slit with two passages in August, 2010. The transects were surveyed for four upstream cross-sections, 7.4 m, 34 m, 86 m, and 150 m distance from dam in October 2010. Sediment size was surveyed at river bottom and bank. Sediment of cobble size was found at the wetted bottom, and small size particles of sand to medium gravel composed river bank. Discharge was $2.5\;m^3/s$ and bottom slope was 0.027 m/m. Excess shear stress (${\tau}_{ex}$) was calculated for hydraulic erosion by subtracting the values of critical shear stress (${\tau}_{c}$) from the value of shear stress (${\tau}$) at river bottom and bank (${\tau}_{ex}=\tau-{\tau}_c$). Shear stress of river bottom (${\tau}_{bottom}$) was calculated using the cross-sectional shear stress, and bank shear stress (${\tau}_{bank}$) was calculated from the method of Flintham and Carling (1988). $${\tau}_{bank}={\tau}^*SF_{bank}((B+P_{bed})/(2^*P_{bank}))$$ where $SF_{bank}=1.77(P_{bed}/p_{bank}+1.5)^{-1.4}$, B is the water surface width, $P_{bed}$ and $P_{bank}$ are wetted parameter of the bed and bank. Estimated values for ${\tau}_{bottom}$ for a flow of $2.5\;m^3/s$ were lower as 25.0 (7.5 m cross-section), 25.7 (34 m), 21.3 (86 m) and 19.8 (150 m), in N/$m^2$, than critical shear stress (${\tau}_c=62.1\;N/m^2$) with cobble of 64 mm. The values were insufficient to erode cobble sediment. In contrast, even if the values of ${\tau}_{bank}$ were lower than the values for ${\tau}_{bottom}$ as 18.7 (7.5 m), 19.3 (34 m), 16.1 (86 m) and 14.7 (150 m), in N/$m^2$, excess shear stresses were calculated at the three cross-sections of 7.5 m, 34 m, and 86 m distances compare with ${\tau}_c$ is 15.5 N/$m^2$ of 16mm gravel. Bank shear stresses were sufficient for erosion of the medium gravel to sand. Therefore there is potential to erode lateral bank than downward erosion in a flow of $2.5\;m^3/s$. Undercutting of the wetted bank can causes bank scour or collapse, therefore this channel has potential to become wider at the same time. This research is about a potential of sediment erosion, and the result could not verify with real data. Therefore it need next step for verification. In addition an erosion mechanism for river restoration is not simple because discharge distribution is variable by snow-melting or rainy season, and a function for disaster control will recover by big precipitation event. Therefore it needs to consider the relationship between continuous discharge change and sediment erosion.

• 한국진공학회지
• /
• 제18권4호
• /
• pp.288-295
• /
• 2009

본 논문은 확산펌프 기반의 축전 결합형 $BCl_3$ 플라즈마를 사용하여 GaAs와 AlGaAs를 건식 식각한 연구에 관한 것이다. 실험에서 사용한 압력 범위는 $50{\sim}180$ mTorr, CCP 파워는 $50{\sim}200\;W$, $BCl_3$ 가스 유량은 $2.5{\sim}10$ sccm 이었다. 식각 후에 GaAs와 AlGaAs의 식각 속도와 표면 거칠기분석은 표면 단차 측정기를 이용하여 하였다. GaAs의 식각 벽면과 표면 상태는 전자현미경으로 분석하였다. 식각 중 플라즈마의 광 특성 분석은 광학 발광 분석기를 이용하였다. 본 실험을 통하여 5 sccm의 소량의 $BCl_3$ 가스 유량으로 공정 압력이 130 mTorr이내인 경우에는, 100 W CCP 파워의 조건에서 GaAs는 약 $0.25{\mu}m$/min 이상의 우수한 식각 속도를 얻을 수 있었다. AlGaAs의 경우는 GaAs의 식각 속도보다 조금 낮았다. 그러나 같은 유량에서 공정압력이 180 mTorr로 높아지면 GaAs와 AlGaAs의 식각 속도가 급격히 감소하여 거의 식각되지 않는 것을 알 수 있었다. 또한 CCP 파워의 경우에는 50 W의 파워에서는 GaAs와 AlGaAs 모두 거의 식각되지 않았다. 그러나 $100{\sim}200\;W$의 조건에서는 $0.3{\mu}m$/min 이상의 높은 식각 속도를 주었다. 두 결과를 보았을 때 축전결합형 $BCl_3$ 플라즈마 식각에서 GaAs와 AlGaAs의 식각 속도는 CCP 파워가 $100{\sim}200\;W$ 범위에 있으면 그 값에 비례하지 않고 거의 일정한 값이 된다는 사실을 알았다. 75mTorr, 100 W의 CCP 파워 조건에서 $BCl_3$의 유량 변화에 따른 GaAs와 AlGaAs의 식각 속도의 경우, $BCl_3$의 유량이 2.5 sccm의 소량일 때는 GaAs는 식각 속도가 높았지만 AlGaAs는 거의 식각되지 않는 흥미로운 결과를 얻었다. 플라즈마 발광 특성을 보면 $BCl_3$ 축전 결합 플라즈마는 주로 $500{\sim}700\;mm$ 범위를 가지는 넓은 분자 피크만 만든다는 것을 알 수 있었다. 전자 현미경 사진 결과에서는 5 sccm과 10 sccm의 $BCl_3$ 플라즈마 모두 식각 중에 GaAs의 벽면을 언더컷팅 하였으며, 10 sccm의 $BCl_3$유량을 사용하였을 때 언더컷팅이 더 심했다.