• 한국환경보건학회지
• /
• 제41권6호
• /
• pp.425-437
• /
• 2015

Objectives: Risk assessment is a tool for predicting and reducing uncertainty related to the effects of future activities. Probability approaches are the main elements in risk assessment, but confusion about the interpretation and use of assessment factors often undermines the message of the analyses. The aim of this study is to provide a guideline for systematic reduction plans regarding uncertainty in risk assessment. Methods: Articles and reports were collected online using the key words "uncertainty analysis" on risk assessment. Uncertainty analysis was conducted based on reports focusing on procedures for analysis methods by the World Health Organization (WHO) and U.S. Environmental Protection Agency (USEPA). In addition, case studies were performed in order to verify suggested methods qualitatively and quantitatively with exposure data, including measured data on toluene and styrene in residential spaces and multi-use facilities. Results: Based on an analysis of the data on uncertainty, three major factors including scenario, model, and parameters were identified as the main sources of uncertainty, and tiered approaches were determined. In the case study, the risk of toluene and styrene was evaluated and the most influential factors were also determined. Five reduction plans were presented: providing standard guidelines, using reliable exposure factors, possessing quality controls for analysis and scientific expertise, and introducing a peer review system. Conclusion: In this study, we established a method for reducing uncertainty by taking into account the major factors. Also, we showed a method for uncertainty analysis with tiered approaches. However, uncertainties are difficult to define because they are generated by many factors. Therefore, further studies are needed for the development of technical guidelines based on the representative scenario, model, and parameters developed in this study.

• Earthquakes and Structures
• /
• 제26권4호
• /
• pp.311-326
• /
• 2024

Transmission tower structures are particularly susceptible to damage and even collapse under strong seismic ground motions. Conventional seismic analyses of transmission towers are usually performed by considering only ground motion uncertainty while ignoring structural uncertainty; consequently, the performance evaluation and failure prediction may be inaccurate. In this context, the present study numerically investigates the seismic responses and failure mechanism of transmission towers by considering multiple sources of uncertainty. To this end, an existing transmission tower is chosen, and the corresponding three-dimensional finite element model is created in ABAQUS software. Sensitivity analysis is carried out to identify the relative importance of the uncertain parameters in the seismic responses of transmission towers. The numerical results indicate that the impacts of the structural damping ratio, elastic modulus and yield strength on the seismic responses of the transmission tower are relatively large. Subsequently, a set of 20 uncertainty models are established based on random samples of various parameter combinations generated by the Latin hypercube sampling (LHS) method. An uncertainty analysis is performed for these uncertainty models to clarify the impacts of uncertain structural factors on the seismic responses and failure mechanism (ultimate bearing capacity and failure path). The numerical results show that structural uncertainty has a significant influence on the seismic responses and failure mechanism of transmission towers; different possible failure paths exist for the uncertainty models, whereas only one exists for the deterministic model, and the ultimate bearing capacity of transmission towers is more sensitive to the variation in material parameters than that in geometrical parameters. This research is expected to provide an in-depth understanding of the influence of structural uncertainty on the seismic demand assessment of transmission towers.

• Asian Journal of Atmospheric Environment
• /
• 제8권4호
• /
• pp.212-224
• /
• 2014

There are several studies on the effects of emissions of highly reactive volatile organic compounds (HRVOC) from the industrial sources in the Houston-Galveston-Brazoria (HGB) area on the high ozone events during the Texas Air Quality Study (TexAQS) in summer of 2000. They showed that the modeled atmosphere lacked reactivity to produce the observed high ozone event and suggested "imputation" of HRVOC emissions from the base inventory. Byun et al. (2007b) showed the imputed inventory leads to too high ethylene concentrations compared to the measurements at the chemical super sites but still too little aloft compared to the NOAA aircraft. The paper suggested that the lack of reactivity in the modeled Houston atmosphere must be corrected by targeted, and sometimes of episodic, increase of HRVOC emissions from the large sources such as flares in the Houston Ship Channel (HSC) distributed into the deeper level of the boundary layer. We performed retrospective meteorological and air quality modeling to achieve better air quality prediction of ozone by comparison with various chemical and meteorological measurements during the Texas Air Quality Study periods in August-September 2006 (TexA QS-II). After identifying several shortcomings of the forecast meteorological simulations and emissions inputs, we prepared new retrospective meteorological simulations and updated emissions inputs. We utilized assimilated MM5 inputs to achieve better meteorological simulations (detailed description of MM5 assimilation can be found in F. Ngan et al., 2012) and used them in this study for air quality simulations. Using the better predicted meteorological results, we focused on the emissions uncertainty in order to capture high peak ozone which occasionally happens in the HGB area. We described how the ozone predictions are affected by emissions uncertainty in the air quality simulations utilizing different emission inventories and adjustments.

• 한국지반공학회지:지반
• /
• 제2권3호
• /
• pp.37-50
• /
• 1986

해양구조물은 토질특성, 파랑하중, 해석방법 등의 불확정성으로 인해 확률론적인 방법으로 신뢰 도해석을 하는 것이 바람직하다. 축토지반에 설치된 해양구조물의 기초설계에서 가장 큰 불확정성 은 비배수전단강도에 기인한다. 따라서 점토지반의 전단강도 산정에 영향을 끼치는 모든 불확정성 을 조사하여 안정해석에 적용한다. 또한 실내시험과 현장관입계험을 이용한 정토지반의 전단강도 산정방법의 불확정성을 조사하고 북해의 Statfjord B에 위치한 중력식 해양구조물의 활동에 대한 신뢰도해석에 각각 적용한다. 현장관입시험을 이용하여 비배수전단강도를 산정하여 구한 활동에 대한 파괴확률은 실내시험을 이용한 경우보다 크다. 현장관입시험을 이용한 비배수전단강도 산정방법에 큰 불확정성이 존재하는 경험적인 방법으로 결정된 Nk 값의 불확정성에 주로 기인한다.

• Journal of Mechanical Science and Technology
• /
• 제17권7호
• /
• pp.1095-1103
• /
• 2003

The Holographic Particle Velocimetry system can be a promising optical tool for the measurements of three dimensional particle velocities. In this study, the holographic particle velocimetry system was used to measure the sizes and velocities of droplets produced by a commercial full cone spray nozzle. As a preliminary validation experiment, the velocities of glass beads on a rotating disk were measured with uncertainty analysis to identify the sources of all relevant errors and to evaluate their magnitude. The error of the particle velocity measured by the holographic method was 0.75 ㎧, which was 4.5% of the known velocity estimated by the rotating speed of disk. The spray droplet velocities ranged from 10.3 to 13.3 ㎧ with average uncertainty of ${\pm}$ 1.6 ㎧, which was ${\pm}$ 14% of the mean droplet velocity. Compared with relatively small uncertainty of velocity components in the normal direction to the optical axis, uncertainty of the optical axis component was very high. This is due to the long depth of field of droplet images in the optical axis, which is inherent feature of holographic system using forward-scattering object wave of particles.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권3호
• /
• pp.19-25
• /
• 2004

Pitch measurements of 150 nm one-dimensional grating standards were carried out using a contact mode atomic force microscopy with a high resolution three-axis laser interferometer. This measurement technique was named as the 'nano-metrological AFM'. In the nano-metrological AFM, three laser interferometers were aligned precisely to the end of an AFM tip. Laser sources of the three-axis laser interferometer in the nano-metrological AFM were calibrated with an I$_2$ stabilized He-Ne laser at a wavelength of 633 nm. Therefore, the Abbe error was minimized and the result of the pitch measurement using the nano-metrological AFM could be used to directly measure the length standard. The uncertainty in the pitch measurement was estimated in accordance with the Guide to the Expression of Uncertainty in Measurement (GUM). The primary source of uncertainty in the pitch-measurements was derived from the repeatability of the pitch-measurements, and its value was about 0.186 nm. The average pitch value was 146.65 nm and the combined standard uncertainty was less than 0.262 nm. It is suggested that the metrological AFM is a useful tool for the nano-metrological standard calibration.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.123-130
• /
• 2003

The estimation of key soil properties and subsequent quantitative assessment of the associated uncertainties has always been an important issue in geotechnical engineering. It is well recognized that soil properties vary spatially as a result of depositional and post-depositional processes. The stochastic nature of spatially varying soil properties can be treated as a random field. A practical statistical approach that can be used to systematically model various sources of uncertainty is presented in the context of reliability analysis of slope stability Newly developed expressions for probabilistic characterization of soil properties incorporate sampling and measurement errors, as well as spatial variability and its reduced variance due to spatial averaging. Reliability analyses of the probability of slope failure using the different statistical representations of soil properties show that the incorporation of spatial correlation and conditional simulation leads to significantly lower probability of failure than obtained using simple random variable approach.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권11호
• /
• pp.622-627
• /
• 2002

The power comparison techniques have implemented power measurements, in which a power comparator is used to balance ac against a dc power obtained from known values. The developed power standard system using the comparison techniques consists of dc sources, ac source, control switches, resistive voltage dividers, resistive shunts and a power comparator. The total uncertainty of the power standard system was proved by analysis of the component instruments. Its expanded(k=2) uncertainty is evaluated to be less than 30 uW/VA at unit power factor and 42 uW/VA at power factor 0.5

• 한국태양에너지학회 논문집
• /
• 제21권3호
• /
• pp.25-32
• /
• 2001

The major purpose of this paper is to develop an uncertainty estimate for the calibration of thermopile instruments used to measure solar radiation parameters. We briefly describe the solar radiation parameters most often measured, instrumentation, reference standards, and calibration techniques. The bulk of the paper describes elemental sources of error and their magnitude. We then apply a standard error analysis methodology to combine these elemental error estimates into a statement of total uncertainty for the instrument calibration factor. Our results allow one to evaluate the accuracy of a radiometric measurement using thermopile instrumentation in the light of the application, such as engineering test evaluation or for validation of theoretical models.

• 산업경영시스템학회지
• /
• 제34권2호
• /
• pp.112-120
• /
• 2011

The early phase of design intrinsically contains multiple sources of uncertainty in describing design, and nevertheless the decision-making process at this phase exerts a critical effect upon drawing a successful design. This paper proposes a set-based design approach for multi-objective design problem under uncertainty. The proposed design approach consists of four design processes including set representation, set propagation, set modification, and set narrowing. This approach enables the flexible and robust design while incorporating designer's preference structure. In contrast to existing optimization techniques, this approach generates a ranged set of design solutions that satisfy changing sets of performance requirements.