• 펄프종이기술
• /
• 제29권2호
• /
• pp.83-90
• /
• 1997

An unbleached hardwood kraft pulp was bleached in vitro with partially purified manganese peroxidase (MnP) from the fungus Phanerochaete sordida YK-624 without the addition of MnSO$_4$ in the presence of oxalate, malonate or gluconate known as manganese chelator, When the pulp was treated without the addition of MnSO$_4$, the pulp brightness increased by about 10 points in the presence of 2 mM oxalate, but the brightness did not significantly increase in the presence of 50 mM malonate. Residual MnP activity decreased faster during the bleaching with MnP without MnSO$_4$ in the presence of malonate than in the presence of oxalate. Oxalate reduced MnO$_2$ which already existed in the pulp or was produced from $Mn^{2+}$ by oxidation with MnP and thus supplied $Mn^{2+}$ to the MnP system. Thus, bleaching of hardwood kraft pulp with MnP, using manganese originally existing in the pulp, became possible in the presence of oxalate, a good manganese chelator and reducing reagent. Properties of partially purified MnPs from liquid cultures of white rot fungi, Ganoderma sp. YK-505, Phanerochaete sordida YK-624 and Phanerochaete chrysosporium were compared. MnP from Ganoderma sp. YK-505 was superior to MnPs from P. sordida YK-624 and P. chrysosporium in stabilities against high temperature and high concentration of $H_2O$$_2$. The MnP from Ganoderma sp. YK-505 differed in pH-activity profile from other MnPs. These data suggest that MnP from Ganoderma sp. YK-505 has different structure from those of other fungi. Bleaching of hardwood kraft pulp using the MnP from ganoderma sp. YK-505 is now in progress.

• 펄프종이기술
• /
• 제39권4호
• /
• pp.45-52
• /
• 2007

Whole, bast and core fibers of kenaf cultivar Tainung-2 were pulped under different pulping methods, thermomechanical and kraft pulping methods. The physical and optical properties of kenaf TMP(thermomechanical pulp) and KP(kraft pulp) handsheets were investigated and the results from the study are summarized as follows: Yields of TMP and KP were $77{\sim}87%\;and\;43{\sim}52%$, respectively. There was no significant change in apparent density between kenaf KP and USKP(unbleached softwood kraft pulp) but TMP showed a little lower apparent density. Bast pulp had the lowest apparent density regardless of pulping methods. Tensile strength of kenaf KP was higher than that of TMP but similar to that of USKP. Both TMP and KP handsheets of bast fraction showed the highest tear strengths among whole, bast, and core fractions. Core fraction showed the lowest tear strengths under different pulping methods. In general burst strength of kenaf pulp under different pulping methods was lower than that of USKP, and kenaf pulp had better stiffness than USKP. Brightness of kenaf KP and TMP was higher than that of USKP. There was no significant variation in opacity between kenaf pulp and USKP even though kenaf pulp showed a little lower opacity. The main difference in paper quality between the core fiber and bast fiber is derived from the fact that bast fiber is long and thin, whereas core fiber is short and thick.

• Journal of the Korean Wood Science and Technology
• /
• 제25권2호
• /
• pp.100-109
• /
• 1997

The objectives of this study was to decrease pollutions of bleaching effluent and was to enhanced brightness of non-chlorine bleached pulps by xylanase treatments. Xylanase cloned Esherichacoli(E. coli) capable of each of endo, exo-xylanase and acetyl-esterase were obtained from Bacillus stearothermophillus. These xylanase was maintained high activity in alkali and high temperature. Especially endo-xylanase would be more active in $60^{\circ}C$ and pH 11. Xylanase pretreatment(X) of unbleached pulp increased brightness, and decreased the degree of delignification. The degree of increase in brightness of pulp due to xylanase pretreatment was similar to non-enzyme treated pulp, regardless of the amount of enzyme added. Therefore, the addition of xylanase of 2 unit was recommended when considering costs of enzyme. The pulp bleached XO sequence had higher brightness and lower Kappa no, than O bleached pulp, while pulp bleached XP sequence had similar brightness and Kappa no. with P bleached pulp. In XOC/D, XOZ and XOP bleaching sequences, brightness and degree of delignification were improved. The C/D and Z stage bleached pulp was good effect on rate of raise in brightness and Kappa no., but P stage bleached pulp had similar level in non-enzyme treated bleaching sequence.

• 펄프종이기술
• /
• 제37권5호통권113호
• /
• pp.50-55
• /
• 2005

In previous report, we investigated the impact of hexeneuronic acid and some residual extractiveson lignin determination. These non-lignin components severely interfered lignin content determination which also affect on the oxygen delignification comparison between aspen and pine unbleached kraft pulps. Very different pattern was observed whether based on uncorrected conventional kappa number or based on corrected kappa number in oxygen delignification comparison. Lower kappa number aspen pulps showed poor response to oxygen delignification when kappa number was used as lignin determination method but better response with using the acid lignin method. Phenolic hydroxyl group in kraft pulps were also compared based on uncorrected or corrected kappa numberfor lignin content. Based on uncorrected kappa number, lower kappa number oxygen-delignified pulps had lower phenolic hydroxyl group. However, lower kappa number oxygen-delignified pulps showed much higher phenolic hydroxyl group based on the corrected lignin content. For accurate comparison for residual lignin properties from different pulps, lignin determination should be corrected from non-lignin components contribution to lignin.

• 펄프종이기술
• /
• 제36권5호
• /
• pp.69-77
• /
• 2004

Degradations of pine, yellow poplar and sweet gum by two fungi, Pycnoporus cinnabarinus and Trichophyton rubrum LSK-27 were investigated. P. cinabarinus degraded pine block samples much faster than T rub rum LSK-27, whereas P. cinnabarinus and T rubrum LSK-27 degraded yellow poplar and sweet gum at almost the same rate. In an effort to get a better understanding of how fungi degrade lignin in wood, contents of various functional groups were analyzed. After three-months of degradation of pine flour by these fungi, the following changes were observed: an increase in condensed phenolic OH group and carboxylic acid group content, a decrease in the guaiacyl phenolic OH content, and little change of aliphatic OH group content. Further studies in the degradation of pine flour by P. cinnabarinus indicated that the increase in condensed phenolic OH group content and the decrease in guaiacyl phenolic OH group content occurred in the first month of the degradation. The changes of functional group contents in the degradation of unbleached softwood kraft pulp by P. cinnabarinus had the same trends as those in the degradation of pine flour. That is, structural alteration of lignin due to the kraft pulping process had little effect on how P. cinnabarinus degraded lignin.

• 펄프종이기술
• /
• 제36권1호
• /
• pp.24-29
• /
• 2004

Alkaline cellulolytic enzymes from cultured medium of Coprinus cinereus 2249 were purified with gel and ion-exchange chromatography and characteristics of those enzyme proteins were investigated. A fiber length distribution and a crystallinity of cellulose and sugar composition of enzyme treated Mixed Office Wastepaper(MOW) and Unbleached Kraft Pulp(UKP) were analysed. The conclusion could summarized as follows; \circled1 Alkaline and acidic, endo- and exo-glucanases were purified from cultured medium of Coprinus cinereus 2249. \circled2 The approximate molecular weight of alkaline endo-glucanase was 42 kDa, and also that of alkaline exo-glucanase was 50 kDa. A fiber length distribution and a crystallization of cellulose and sugar composition of enzyme treated MOW and UKP were not so much changed with original paper and pulp.

• 공업화학
• /
• 제10권3호
• /
• pp.367-373
• /
• 1999

OCC의 구성 특성을 조사하고 OCC로부터 elemental chlorine free (ECF)나 totally chlorine free (TCF) 표백을 통한 백색도 85% (ISO) 이상의 인쇄 및 필기용지를 제조하기 위한 연구가 수행되었다. American old corrugated containers (AOCC)는 Korean old corrugated containers (KOCC)보다 섬유길이가 길며, 주로 장섬유로 구성되어 있고 전자의 경우 약 80%가 unbleached kraft pulp (UKP)로 구성되어 있으나 후자는 20% 정도였다. 또한 KOCC의 경우 회분함량 (9.7%)과 NaOH 추출물 (19.3%)이 AOCC보다 현저히 높았다. AOCC로부터 ECF 표백이 가능한 펄프 (kappa no. 25이하, 수율 70%)를 생산하기 위한 증해조건은 활성알칼리 20%, 황화도 25%, Anthraquinone (AQ) 0.1%, 펄핑온도 $170^{\circ}C$, 증해시간 90분이다 (kappa no. 22.6, 수율 68%). KOCC의 경우는 증해시간을 60분으로 단축시킬 수 있었다. (kappa no. 16.4, 수율 66%) 증해된 AOCC 펄프를 TCF나 ECF 표백단계를 거치면 백색도 85% (ISO) 이상의 펄프를 생산할 수 있었다. 그러나 KOCC 펄프는 TCF 표백으로서 목표 백색도를 달성할 수 없었다. 표백 KOCC 펄프는 표백 AOCC 펄프에 비하여 연장지수가 낮으나 파열지수와 인열지수는 오히려 높은 경향을 나타내었다.

• 펄프종이기술
• /
• 제44권5호
• /
• pp.1-7
• /
• 2012

Chemical composition, morphological properties and papermaking properties of Sasa quelpaertensis Nakai were investigated in order to use it comprehensively. The lignin contents of stalks and leaves were 18.8% and 15.3% and the holocellulose contents were 63.3% and 48.6% respectively. The contents of ash and the amount of water extract showed the higher value than those of wood or other bamboo species. The average fibers length and width of Sasa quelpaertensis Nakai were 780 ${\mu}m$ and 14.8 ${\mu}m$. The fibers of Sasa quelpaertensis Nakai stalk had thinner width and more slender structure than those of softwood. The handsheet made of Sasa quelpaertensis Nakai alkaline pulp showed higher in tensile strength and bulkier structure than those of handsheet made of soft wood unbleached kraft pulp.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.78-85
• /
• 2000

Due to environmental proessures there is increasing use of hydrogen peroxide as a total or partial substitute for chlorine based bleaching agents within ECF or TCF sequences. However, to aceive satifactory brightness using peroxide alone, stages having a combination of high temperature, pressure, pH or residence time are required. It may also have negative impact on fiber quality . Therefore, it would be of advantage if vertain means could be found to make hydrogen peroxide more effective in bleacing , via shortening treaction time and allevaiating the need for such forcing reaction conditions. This can be achieve by converting the peroxide in-situ to stronger oxidant through the use of 손 bleach activator. In this study to investigate the influence of additives, such as tetraacetylethylenediamine (TAED) and Molybdate (MO) . addition on peroxide bleaching were carried out. Under alkaline conditions the bleching additives. TAED and Mo. can react H2O2 to form peracetic acid and peroxomolybdate respectively and these generated activators can improve deliginification,. The activators make it possible to bleach the pulp efficiently at low temperature in the range 50 to 7$0^{\circ}C$. Also, addition of TAED and Mo is an environmentally friendly way of enhancing the performance of peroxide bleaching can be incorporated into TCF and ECF sequences.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.60-67
• /
• 2011

Hemicelluloses pre-extracted from Korean mixed wood chip were investigated as a wet-end additive. Hemicelluloses dissolved in hot water and alkali solution were isolated by ethyl alcohol precipitation from pre-extractives. They showed molecular weight of 9,000 ~ 27,000 g/mol as revealed by size exclusion chromatography. The reduction of molecular weight through hot water extraction was caused by autohydrolysis. Chemical composition of the hemicelluloses were analyzed with high-performance liquid chromatography and UV-Vis spectroscopy. As the surface charge of isolated hemicelluloses were negative, the adsorption of hemicelluloses onto softwood unbleached kraft pulp fiber was promoted by poly-DADMAC. The physical properties of handsheets increased as the molecular weight of hemicellulose increased. On the other hands, the optical property decreased with hemicellulose adsorption.