• Tribology and Lubricants
• /
• 제28권5호
• /
• pp.197-202
• /
• 2012

In this study, with the purpose of fundamentally improving the unbalance response vibration of a large PRT motor-generator rotor by design, a performance improvement design analysis is carried-out by retrofitting tilting pad bearings, replacing the plain partial journal bearings that were originally applied for operation at a rated speed of 1,800 rpm. In this process, a goal of the design analysis is to obtain a design solution for maximizing the direct stiffness of the bearings while satisfying the key basic lubrication performance requirements such as the minimum lift-off speed and maximum oil-film temperature. The results show that with a careful design application of tilting pad journal bearings for operation at such a relatively low speed of 1,800 rpm, direct stiffness increment of the bearings by about two times can be effectively achieved. Prevention of pad unloading is also considered in the analysis. Moreover, the designs of elliptical and offset half journal bearings are also analyzed and reviewed.

• 한국소음진동공학회논문집
• /
• 제24권6호
• /
• pp.462-469
• /
• 2014

After drilling operations at the offshore plant, crude oil is producted under high pressure. After that time, oil recovery is reduced, because the pressure of the pipe inside is low during the secondary produce. At that time injection sea water at the pipe inside through water injection pump that the device increase to recovery. A variety of mathematical analysis during the detailed design analysis was not made through the dynamics characteristic at the domestic company. 2D model has reliability of analysis results for the uncomplicated model. Also element and the node the number of significantly less than in the 3D model. So, the temporal part is very effective. In addition, depending on the quality of mesh 3D is a real model and FEM model occurs error. So, user needs a lot of skill. In this paper, a 2D finite element analysis was performed through the dynamics analysis and the study model was validated.

• 한국진공학회지
• /
• 제19권4호
• /
• pp.256-264
• /
• 2010

본 논문에서는 고진공용 터보분자펌프의 비접촉 고속회전을 위한 자기베어링 시스템의 디지털 제어시스템의 설계에 대하여 소개하였으며, 실례로 800 l/s급의 고진공 펌프에 대하여 축 유연모드의 후방향 위험속도를 넘는 최대 40,000 rpm까지의 회전실험 결과를 나타내었다. 제안된 제어시스템은 기본적으로 PID 기반의 직접궤환 제어기와 자이로스코픽 모멘트 효과를 제어하기 위한 교차궤환기, 유연모우드 감쇄를 위한 리드필터와 동기진동 저감을 위한 노치필터 등으로 구성되어 있으며, 이러한 제어기는 자기부상형 터보분자펌프 외에 고속 플라이휠과 같은 자기베어링에 적용될 수 있다.