• Journal of Plant Biology
• /
• 제13권2호
• /
• pp.15-20
• /
• 1970

The treatment of X-ray was manipulated with the large focus of X-ray which was produced the capacity of 90 kilovoltage and 30 milliamphere in the distance of 50 centimeter. The germination of each gruop irradiated with X-ray for 5, 6, and 7 seconds was more delayed in the growth of carrot seed than those of the control group. However the germination of each group irradiated with X-ray for 2, 3, and 4 seconds was rather accelerated than those of the control group. The irradiation of ultraviolet light was carried out in the distance of 20 centimeter by Toshiba germidicial lamp which appeared the wavelength of 2537A$^{\circ}$. The germination of each group irradiated with ultraviolet light for 9, 15, 20, and 40 minutes was more delayed than those of the control group, but the germination of carrot seed was accelerated by adequate dosage of ultraviolet light. Consuquently it was suggested for the author that the inhibited substance contained in carrot seed would be certain fatty substance, becasue the germination of carrot seed was more accelerated by the treatment of acetone than those of X-ray and ultraviolet light.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.52-59
• /
• 1994

Polyester, polyester/cotton blend, nylon and cotton fabrics were ultraviolet cutting finished with padding method or exhaustion method using several UV absorbers. The transmittance of ultraviolet ray in the textiles can be greatly depressed by the processing and it is expected that human skin can be kept safe from sun-burn or damages by ultraviolet ray.

• The Journal of Korean Physical Therapy
• /
• 제4권1호
• /
• pp.13-18
• /
• 1992

Most of the electromagnetic agents used in physical therapy rely for their effects on tissue heating and photoreaction of the body. Infrared and untraviolet light on the other hand, owns its place in medicine because it produces direct photochemial reaction when it interacts with the body. This study was carried out to investigate and review for photoreaction of the akin. The results were an follows. 1. The effects of the infrared are heat production, increasing metabolism, increasing circulation, vasodilatation and pigmentation. 2. Directed photoreactions are divided into acute reaction and chronic reaction, and the acute reaction makes pigmentation from $290\~320nm$ of ultraviolet ray. 3. Ultraviolet ray formated pigmentations, which are melanoblasts excited from ultraviolet ray and received chemical stimulation, that make melanin granule. 4. If exposured with long duration, at ultraviolet ray, it makes skin thickening and epithelioma. 5. Indirected photoreaction is made by existenced hypersensitivity of photoreaction or lack of photodefence structure. 6. The phototoxic reactions are synthesized by chemical reaction of excitement from ultraviolet ray also this time analysis, synthesis and polymerization from energy of a circumferenced substance. 7. Sunscreen substances are P-amino benzoic acid and oxidate titan.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.25-32
• /
• 2010

Compared to general lighting method, the lighting system that uses optic fiber can provide only the visible light of good quality to subject by eliminating ultraviolet ray and infrared ray. Thanks to this merit, it is possible to prevent the hard phenomenon of subject caused by ultraviolet ray and infrared ray and to provide the agreeable light environment. This study developed indoors illumination system of high color rendering on the basis of plastic optic fiber with excellent optical property and processing to substitute halogen lamp which has been used for excellent color rendering in spite of low efficiency and short life. Producing pilot product of the designed illumination system and evaluating the property of electric and optical property, ultraviolet ray radiation quantity and temperature property, this study verified the excellence of suggested lighting system of plastic optic fiber.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.42-46
• /
• 2016

In LCD Display or semiconductor manufacturing processes, the anti-static technology of glass substrates and wafers becomes one of the most difficult issues which influence the yield of the semiconductor manufacturing. In order to overcome the problems of wafer surface contamination various issues such as ionization in decompressed vacuum and inactive gas(i.e. $N_2$ gas, Ar gas, etc.) environment should be considered. Soft X ray radiation is adequate in air and $O_2$ gas at atmospheric pressure while UV radiation is effective in $N_2$ gas Ar gas and at reduced pressure. At this point of view, the "vacuum ultraviolet ray ionization" is one of the most suitable methods for static elimination. The vacuum ultraviolet can be categorized according to a short wavelength whose value is from 100nm to 200nm. this is also called as an Extreme Ultraviolet. Most of these vacuum ultraviolet is absorbed in various substances including the air in the atmosphere. It is absorbed substances become to transit or expose the electrons, then the ionization is initially activated. In this study, static eliminator based on the vacuum ultraviolet ray under the above mentioned environment was tested and the results show how the ionization performance based on vacuum ultraviolet ray can be optimized. These vacuum ultraviolet ray performs better in extreme atmosphere than an ordinary atmospheric environment. Neutralization capability, therefore, shows its maximum value at $10^{-1}{\sim}10^{-3}$ Torr pressure level, and than starts degrading as pressure is gradually reduced. Neutralization capability at this peak point is higher than that at reduced pressure about $10^4$ times on the atmospheric pressure and by about $10^3$ times on the inactive gas. The introductions of these technology make it possible to perfectly overcome problems caused by static electricity and to manufacture ULSI devices and LCD with high reliability.

• 대한토목학회논문집
• /
• 제31권1D호
• /
• pp.91-98
• /
• 2011

최근에 들어 보도나 산책로, 공원 등에 주로 사용되었던 보도블록 및 투수콘크리트 대신 합성고무칩(EPDM Chip)을 사용한 탄성포장이 보행시 충격흡수와 다양한 칼라와 디자인을 연출할 수 있어 사용이 증가되고 있다. 그러나, 자외선에 노출시 합성고무칩의 탄성력, 내구성 등이 저하되고, 황변현상으로 다양한 색상에 의한 경관포장의 기능이 저하되고 있다. 따라서 본 연구에서는 자외선에 노출 시 탄성포장의 주재료인 합성고무칩과 폴리우레탄수지의 색변화를 분석하기 위해 자외선 촉진 내후성 실험을 수행하였다. 그리고 색차계를 이용하여 색공간의 색 수치좌표를 이용하는 방법으로 색차를 정량적으로 분석하였다. 실험결과 기존에 주로 사용되는 BL 폴리우레탄수지의 색변화가 합성고무칩보다 큰 것으로 나타났다. 그리고 BC 폴리우레탄수지의 총색차 ${\Delta}E$가 촉진재령 14일에서 3.162로 BL 폴리우레탄수지의 20.639에 비해 6배 정도 자외선에 대한 색변화 저항성이 높은 것으로 나타났다. 따라서 합성고무칩을 사용하는 탄성포장에서 폴리머 제조시 이소시아네이트를 HMDI로 사용하여 체인형 분자구조를 갖도록 제조된 BC 폴리우레탄수지를 바인더로 사용하는 것이 자외선에 의한 색변화를 억제하는데 매우 효율적인 방법으로 나타났다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.737-739
• /
• 2005

To increase light efficiency, utilizing phosphors transfers ultraviolet ray to visible light and the fluorescent characteristic without change the electrical or optical design. Spreading phosphors on the surface of light bulb mirror can compensate the red and blue light to yield this correct white field after being stimulated by reflected ultraviolet ray.

• 미생물학회지
• /
• 제53권1호
• /
• pp.20-28
• /
• 2017

감마선, 전자빔 등과 같은 전리방사선과 자외선을 이용하는 물리적 멸균방법은 살균 효과와 경제성이 우수하므로 다양한 산업분야에서 사용되고 있으나, 미생물의 돌연변이를 유발하는 요인으로 작용할 수 있다. 본 연구에서는 전리방사선 및 자외선의 유전학적 안전성을 평가하기 위해서 Salmonella enterica와 Escherichia coli 균주에 자외선, 감마선, 전자빔을 조사한 후에 생존율, 돌연변이율, DNA 손상 효과를 조사하였다. 자외선, 감마선, 전자빔의 조사선량이 증가함에 따라 시험 균주의 생존율이 모두 급격히 감소하였으며, 90% 이상이 사멸되는 조사선량은 각각 $0.40{\sim}25.06mJ/cm^3$, 0.11~0.22 kGy, 0.14~0.53 kGy 이었다. SOS/umu-test에서는 자외선, 감마선, 전자빔에 노출된 모든 시료에서 DNA 손상을 유발하는 유전독성이 확인되었다. Ames test에서는 자외선과 감마선에 노출된 후에 복귀 돌연변이율이 각각 $3.82{\times}10^{-4}$, $9.84{\times}10^{-6}$까지 증가하였다. S. enterica TA100의 사멸율이 99.99% 이상 되는 선량의 자외선, 감마선, 전자빔에서의 복귀 돌연변이율은 각각 자연돌연변이율 대비 347배, 220배, 0.6배 증가하였다. E. coli CSH100 균주를 자외선, 감마선, 전자빔에 노출시킨뒤에 조사한 리팜피신내성 돌연변이율은 각각 $2.46{\times}10^{-6}$, $1.66{\times}10^{-6}$, $4.12{\times}10^{-7}$ 이었다. 따라서 사멸효과의 관점에서는 감마선 처리가 미생물 제어에 효과적이라 할 수 있으며, 전자빔은 DNA 손상과 세균돌연변이를 적게 유발하며 사멸효과를 얻는 장점이 있다고 생각된다.

• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.38-43
• /
• 2013

In this study, we propose a simple and indirect method to determine the optical constants of Mo and ITO thin films in the extreme ultraviolet (EUV) wavelength region by using X-ray reflectometry (XRR) and Rutherford backscattering spectrometry (RBS). Mo and ITO films were deposited on silicon substrates by using an RF magnetron sputtering method. The density and the composition of the deposited films were evaluated from the XRR and RBS analysis, respectively and then the optical constants of the Mo and ITO films were determined by an indirect optical method. The results suggest that the indirect method by using the XRR and RBS analysis will be useful to search for suitable high absorbing EUVL mask material quickly.

• 대한의용생체공학회:의공학회지
• /
• 제17권4호
• /
• pp.479-490
• /
• 1996

To utilize collagen as an implantable biomateriall the mcct widely used bovine skin origin Type I collagen was investigated Pepsin treated, Type I atelocollagen was extracted and crosslinked by the ultraviolet(W) ray with wavelength of 254nm or by various concentrations of glutaraldehyde to produce collagen membranes. The crosslink rates of the specimens were observed by a polarized light microscope, a scanning electron microscope, and a Fourier transform infrared (FT-lR) spectrometer. The followings are concluded 1. The collagen membranes produced by both 2.5% glutaraldehyde solution and 254nm UV ray irra- diation demonstrated similar morphologies on polarized light microscopic and scanning electron microscopic views. 2. The chemical structures of the crosslinked membranes by glutaraldehyde over 2.5% in concentrations revealed similar intensities to that of the UV ray irradiated one in FT-lR investigation. 3. To obtain optimal croulink in bovine stalin origin Type I atelocollagen, 2.5% glutaraldehyde solution or UV ray irradiation with 254nm wavelength is acceptable.