• 제목/요약/키워드: ultraviolet (UV)

검색결과 1,215건 처리시간 0.028초

UV광 측정용 아조벤젠 코팅된 FBG의 열적 효과 제거 및 파장 의존성에 대한 연구 (The Study of Thermal Effect Suppression and Wavelength Dependence of Azobenzene-coated FBG for UV Sensing Application)

  • 최동석;김현경;안태정
    • 한국광학회지
    • /
    • 제22권2호
    • /
    • pp.67-71
    • /
    • 2011
  • 본 논문에서는 ultraviolet (UV) 광의 세기를 원격으로 측정하기 위한 아조벤젠 (azobenzene) 코팅된 fiber Bragg grating (FBG)를 구현하였다. 아조벤젠 폴리머는 UV 광에 의해서 탄성이 변화하여 FBG의 코어 격자의 주기 변화를 유도하여 중심파장을 이동시킨다. 중심파장의 이동은 UV 광과 UV 이외의 파장대역의 빛에 의해서 복합적으로 발생하는데 중심파장의 이동량은 약 0.18 nm 이다. 측정의 정확성을 향상시키기 위해서 광원의 복사열에 의한 중심파장의 이동을 열차단 필터(thermal filter)를 사용하여 제거한 결과 중심파장의 이동량은 약 0.06 nm로 다소 감소하였지만 분석 결과 열에 의한 이동량이 충분히 제거된 것을 확인하였다. 또한 서로 다른 방법인 열경화법과 UV 경화법으로 각각 제작된 아조벤젠 폴리머를 이용하여 아조벤젠 코팅 FBG를 제작하였고, 각 제조법에 따른 UV센서로서의 적합성을 확인하였다. 몇 개의 밴드패스 필터(band pass filter)를 사용하여 파장에 대한 민감도를 측정한 결과, 단위 UV 세기당 중심파장의 이동량은 370nm 파장 밴드에서 가장 큰 값인 0.029로, 단파장 영역에서 반응성이 우수하다는 사실을 확인 하였다. 아조벤젠 폴리머의 흡수 스펙트럼과 아조벤젠 코팅 FBG의 파장 의존도가 서로 잘 일치하는 것을 확인하였다.

자외선에너지(UV-C)를 이용한 유기인계 화합물의 분해 (Decomposition of Organophosphorous Compounds with Ultraviolet Energy(UV-C))

  • 김종향;민병철
    • 공업화학
    • /
    • 제9권1호
    • /
    • pp.28-32
    • /
    • 1998
  • 두 종류의 유기인계 살충제인 디클로로보스와 클로로피리포스를 UV조사, UV 조사와 $TiO_2$분말 그리고 UV조사와 sea sand를 저압수은 램프를 이용하여 분해실험을 하였다. 이 화합물의 확인은 가스크로마토그래프, 총유기탄소 그리고 이온크로마토그래프를 사용하였다. 두 물질 모두, UV조사와 sea sand가 UV 조사와 UV조사와 $TiO_2$분말보다 분해가 더 잘 되었다. 반응 최종생성물은 디클로르보스에서는 $Cl^-$, 클로로피리포스에서는 $Cl^-$ $SO_4{^{2-}}$등이 생성되었다.

  • PDF

하수처리장 방류수의 UV 처리시 유기물질, 잔류염소 및 소독부산물 생성 거동 (Behavior of Organic Matter, Chlorine Residual and Disinfection By-Products (DBPs) Formation during UV Treatment of Wastewater Treatment Plant Effluents)

  • 한지희;손진식
    • 상하수도학회지
    • /
    • 제28권1호
    • /
    • pp.61-72
    • /
    • 2014
  • Study on effluent organic matter (EfOM) characteristic and removal efficiency is required, because EfOM is important in regard to the stability of effluents reuse, quality issues of artificial recharge and water conservation of aqueous system. UV technology is widely used in wastewater treatment. Many reports have been conducted on microbial disinfection and micro pollutant reduction with UV treatment. However, the study on EfOM with UV has limited because low/medium pressure UV lamp is not sufficient to affect refractory organics. The high intensity of pulsed UV would mineralize EfOM itself as well as change the characteristics of EfOM. Chlorine demand and DBPs formation is affected on the changed amounts and properties of EfOM. The objective of this study is to investigate the effect on EfOM, chlorine residual, and chlorinated DBPs formation with low pressure and pulsed UV treatment. The removal of organic matter through low pressure UV treatment is insignificant effect. Pulsed UV treatment effectively removes/transforms EfOM. As a result, the chlorine consumption is changed and chlorine DBPs formation is decreased. However, excessive UV treatment caused problems of increasing chlorine consumption and generating unknown by-products.

자외선 소독기 성능 예측을 위한 CFD 해석 기법 연구 (A Study on CFD Methodology of the Performance Predictionfor the UV Disinfection Reactor)

  • 김현수;박정규;이경혁;조진수
    • 한국유체기계학회 논문집
    • /
    • 제17권6호
    • /
    • pp.44-51
    • /
    • 2014
  • The disinfection method using UV has emerged as photodissociation in water disinfection. In order to predict performance for UV disinfection, CFD analysis was performed due to saving cost. Most CFD studies of UV reactor have used particle tracking method. However it demands additional analysis time, computing resource and phase besides working fluid. In this paper, pathogenic microorganisms' route is assumed to streamline of fluid to save computing time. the computational results are in good agreement with experimental results. The results of streamline method are compared with the particle tracking method. In conclusion, the effectiveness of streamline method for UV disinfection are confirmed.

태양전지 모듈 Encapsulation용 EVA의 장기 UV/온도 내구성을 위한 가속시험설계 및 열화분석

  • 정재성;현대선;변기남;박노창
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2012년도 춘계학술발표대회
    • /
    • pp.100.1-100.1
    • /
    • 2012
  • 태양전지 모듈의 25년 이상 장기간 정상 발전을 위해 태양전지 모듈을 구성하는 부품 소재의 장기 열화메커니즘 연구가 중요시되고 있다. 결정질 및 박막 태양전지 모듈 내 셀을 보호하기 위한 봉지재(Encapsulation)로 다양한 폴리머 재료가 적용되고 있다. 봉지재 부품으로 적용되고 있는 에틸렌 비닐 아세테이트(Ethylene Vinyl Acetate, EVA)는 장기 열화특성 및 내구성 개선 연구가 중요하다. 따라서 EVA를 가속열화하여 열화메커니즘 분석과 25년 보증 내구성을 보유하고 있는지 연구가 필요하다. 본 연구에서는 EVA의 Ultraviolet(UV), 온도 복합 환경스트레스 조건을 적용한 가속시험을 수행하고 장기 열화메커니즘을 분석하였다. 수명 및 손상모델을 이용하여 실환경에서 변화하는 UV와 온도를 일정한 값으로 나타낼 수 있는 UV/온도 가속조건을 설계하였다. 이를 통해 UV/온도 가속조건을 설정하였고 1년 및 25년 동안 EVA에 인가되는 stress와 유사한 양을 인가할 수 있는 시험시간을 결정하였다. 시험 후 전자현미경, AFM, FT-IR, TGA, DSC 등의 분석을 통해 열화메커니즘을 도출하였다.

  • PDF

PL Degradation을 활용한 OLED 소자의 사진 이미지 구현 (Realization of Static Image on OLEO using Photoluminescence Degradation)

  • 서원규;문대규
    • 한국전기전자재료학회논문지
    • /
    • 제21권9호
    • /
    • pp.859-862
    • /
    • 2008
  • We have realized static image on organic light emitting diodes (OLEDs) using photoluminescence degradation. Ultraviolet (UV) was irradiated to the glass side of device. UV power was 350 Wand the wavelength was 365 nm. The UV irradiation gives rise to the degradation of photoluminescence. Due to the degradation, the current density-voltage curve was shifted to the higher voltage side and the luminescence was also degraded by the current and photoluminescence drop. The negative imaged films were prepared to control the transmittance of UV. The UV light was passed through the film. By this method, the film image was transferred to the device with reversed image and the static image was realized on the OLED.

The Effect of UV-A and Reactive Oxygen Species on Glycosylation and Fragmentation of Calf Skin Collagen

  • Wan Goo Cho;Sang Jin Kang;Seong Don Hong;Quse Chae
    • Bulletin of the Korean Chemical Society
    • /
    • 제14권1호
    • /
    • pp.107-109
    • /
    • 1993
  • Non-enzymatic glycosylation and fragmentation of collagen molecule were investigated by irradiating Ultraviolet A(UV-A) with or without scavengers of reactive oxygen species (ROS) in the presence of glucose. Non-enzymatic glycosylation was increased by UV-A at high concentration of glucose. It was reduced in the presence of the scavengers of superoxide radical and singlet oxygen, but not reduced in the presence of hydroxy radical scavenger. Fragmentation of collagen was increased by UV-A, but it was decreased in the presence of all ROS scavengers tested. Superoxide radical and singlet oxygen produced by autoxidation of glucose without UV-A may encounter the initial phase of glycosylation. Data presented here suggest that UV-A affects only on the fragmentation process, but all ROS except hydroxy radical act on both processes. It appears that hydroxy radical does not act on the glycosylation process.

화염감지기에 대한 고찰

  • 이복영
    • 방재기술
    • /
    • 통권13호
    • /
    • pp.18-26
    • /
    • 1992
  • This report is explained about operating principles, characteristices of flame detectors. Flame detector is designed to detect the UV (Ultraviolet) and IR (Infrared) rediation produced by flaming involving carbonaceous materials.

  • PDF

포장재 조건에 따른 365 nm UV-LED 조사의 Bacillus subtilis 생육 억제 효과 (Inhibition Effect of Bacillus subtilis on 365 nm UV-LED Irradiation According to Packaging Materials)

  • 이다혜;정소미;쉬시아오통;김꽃봉우리;안동현
    • 한국미생물·생명공학회지
    • /
    • 제47권3호
    • /
    • pp.332-336
    • /
    • 2019
  • 본 연구에서는 그람 양성의 호기성 유포자 세균 중 자연계에 널리 분포되어 식품에 문제를 일으키는 대표적인 균인 B. subtilis를 대상으로 365 nm UV-LED의 생육 억제 효과를 입증하였다. 또한 365 nm UV-LED 조사 시, 식품 포장재로 흔히 사용되고 있는 유리, LLD-PE, Nylon/LDPE 및 PS 등의 포장 조건에 따른 B. subtilis 생육 억제 효과를 확인하였다. 그 결과, B. subtilis의 생육 억제 효과가 가장 뛰어난 재질은 Nylon/LDPE와 LLD-PE로 확인되었고, 대조구의 생존율인 -log 5 값과 비교하여 각각의 생존율은 약 -log 2.5-2.9, -log 2.58-3.61로 나타났다. 이 때 재질의 두께가 미생물의 생육에 미치는 영향은 미미한 것으로 관찰되었고, 포장재질에 따라 365 nm UV-LED 투과력이 다르다는 것을 확인할 수 있었다. 통상적으로 log 3 이상 생균수가 감소하면 99.9% 살균효과가 있는 것으로 나타낼 수 있는데, 본 연구를 통해 365 nm UV-LED가 흔히 사용되고 있는 식품 포장재를 투과하여 균의 생육 억제에 영향을 줄 수 있음을 확인하였다. 이러한 결과를 통해 365 nm UV-LED의 사용이 식품보존과 식품산업 분야의 응용기술로써 잠재력이 있음을 시사하는 바이다.