• 동력기계공학회지
• /
• 제19권2호
• /
• pp.33-39
• /
• 2015

In conducting indoor positioning by code division multiple access using spread spectrum ultrasonic waves, it is required to detect signals under the influence of near-far problem occurred by difference on signal power, caused by distance between transmitter and receiver. For discussing robustness to the problem, we verified measuring accuracy on distance from an experiment on a real space with a hardware device where our proposed method is mounted. The proposed method performs automatic signal detection by setting threshold level dynamically. As an experimental result, measurable distance were improved by the proposed method, and measurement errors were up to 50mm in distances from 1000mm to 6000mm; therefore, enough accuracy to realize self-localization or navigation for autonomous mobile robot or human was obtained.

• 한국전기전자재료학회논문지
• /
• 제15권10호
• /
• pp.914-920
• /
• 2002

This study investigates the mechanism of a dual mode probe that generates both of the longitudinal and shear waves simultaneously with a single FZT element. Most of conventional ultrasonic probes are constructed to generate either longitudinal or shear waves. After poling, PZT has the hexagonal 6mm crystal symmetry. All possible crystal cuts are checked to determine appropriate Euler transformation angles for efficient excitation of dual modes. For the selected cut, performance of the dual mode element is analyzed through numerical simulation and experiments. Results of the analysis determine the optimal crystal cut for simultaneous generation of P and S waves of equal strength.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.583-586
• /
• 2000

This work ethibits how susceptive the shear ultrasonic waves are to a little misoriented plies according to the angle variation of shear ultrasoic waves $0^\circ$ , $45^\circ$ and $90^\circ$. Also, it is shown that shear waves, particularly the transmission mode with the transmitter and receiver perpendicular to each other, have high sensitivity for detecting anomalies in fiber orientation and ply layup sequence that may occur in the manufacturing of composite laminates. Experimental results are agreed with modeling solutions which were based on decomposition of shear wave polarization vector as it propagates through the composite laminates. This wave appeared considerably to be sensitive to CFRP composites to the thickness direction along in-plane fibers.

• 비파괴검사학회지
• /
• 제26권3호
• /
• pp.190-197
• /
• 2006

For enhancement of flaw detactability using array transducers, focusing of ultrasonic waves on a target in an inhomogeneous medium or through a complex geometry is important. But focusing can be strongly degraded by geometrical distortion of field radiated by the array transducers or by sound speed fluctuations in the propagating medium. In recent years, the time reversal technique has been proposed. Thus, in this paper, we describe the basic principal of the time reversal technique for focusing. Then, the implementation results of the time reversal technique for ultrasonic inspections using bulk waves and guided waves generated by array transducers are presented.

• 동아시아식생활학회지
• /
• 제16권2호
• /
• pp.192-198
• /
• 2006

This study was carried out to investigate the effect of ultrasonic wave scanning on the quality of fried chicken breast. The ultrasonic wave scanning time was 0(US-0), 3(US-3), 7(US-7) and 10(US-10) minutes, no respective comparison here. The moisture of raw breast was higher than that of flied chicken, while the crude protein, fat and ash of fried chicken were higher than those of raw breast(p<0.05). The moisture content was influenced by the ultrasonic waves scanning, but the crude protein, fat and ash were not. The $L^*$(lightness) and $b^*$(yellowness) values of fried chicken were higher than those of raw breast but the $a^*$(redness) value of raw breast was higher than that of fried chicken. The $L^*$ value was lowest in US-0, while the $a^*$ value was not significantly different and the $b^*$ value was lowest in US-7 among the fried chicken samples(p<0.05). The fried chicken was not influenced by the ultrasonic wave scanning, indicating that the longer scanning time increased the water holding capacity. The pH ranged from 6.54 to 6.93, and the calorie of fried was higher than that of raw breast, but was not influenced by the ultrasonic wave scanning time. The VBN content ranged from 8.73 to 12.3 mg%. The TBARS value of raw breast was lower than that of flied chicken and was not influenced by the ultrasonic wave scanning time. Total amino acid was highest in raw breast and lowest in US-3(p<0.05). The taste, texture and juiciness were superior with increasing scanning time, but flavor and Palatability were not significantly different among the fried chicken samples(p<0.05).

• Smart Structures and Systems
• /
• 제17권5호
• /
• pp.795-817
• /
• 2016

A non-contact, in-situ and non-invasive technique for health monitoring of submerged fiber reinforced polymers (FRP) laminates has been developed using ultrasonic guided waves. A pair of mobile transducers at specific angles of incidence to the submerged FRP specimen was used to excite Lamb wave modes. Lamb wave modes were used for comprehensive inspection of various types of manufacturing defects like air gaps and missing epoxy, introduced during manufacturing of FRP using Vacuum Assisted Resin Infusion Molding (VARIM). Further service induced damages like notches and surface defects were also studied and evaluated using guided waves. Quantitative evaluation of transmitted ultrasonic signal in defect ridden FRPs $vis-{\grave{a}}-vis$ healthy signal has been used to relate the extent of damage in FRPs. The developed technique has the potential to develop into a quick, real time health monitoring tool for judging the service worthiness of FRPs.

• 제어로봇시스템학회논문지
• /
• 제12권9호
• /
• pp.876-882
• /
• 2006

This study presents an ultrasonic location awareness system for the ubiquitous computing with absolute position. The flight time of ultrasonic waves is determined by a period detecting technique which is able to extend the sensing range compared with traditional methods. For location awareness, ultrasonic waves are sent successively from each ultrasonic transmitter and synchronized by radio frequency (RF) signal, where the transmitting part is fixed and the receiving part is movable. To expand the recognizing range, cell matching technique and coded ultrasonic technique are introduced. The experimentation for various distances is accomplished to verify the used period detecting technique of U-SAT system. The positioning accuracy by using cell matching is also verified by finding the locations of settled points and the usability of coded ultrasonic technique is verified. As a result, the possibility of ultrasonic location awareness system for the ubiquitous computing can be discussed as a pseudo-satellite system with low cost, a high update rate, and relatively high precision, in the places where CPS is not available.

• 비파괴검사학회지
• /
• 제25권1호
• /
• pp.20-26
• /
• 2005

유도초음파는 판, 봉 또는 관과 같은 구조물의 장거리 탐상에 사용되고 있다. 그러나, 유도초음파에는 그 모드가 많고 전파속도가 달라서, 원하는 모드를 선택적으로 발생시키고 수신하는 기법이 유도초음파를 응용하는데 핵심적인 기술 중 하나이다. 본 연구에서는 배열형 탐촉자의 위상을 조절하여 유도초음파를 발생시키는 방법에 대하여 연구하였다. 이를 위하여 8채널 초음파 펄서/리시버, 그리고 각각의 채널을 일정한 시간간격으로 구동할 수 있는 회로를 개발하였다. 8개의 탐촉자를 만들어서 배열형으로 사용하여 유도 초음파를 발생시켰다. 이웃한 요소 탐촉자 사이의 구동시간 간격을 제어하여 이에 맞는 위상속도를 지닌 유도초음파를 선택적으로 발생시켰고, 발생된 유도초음파의 군속도를 측정하였으며, 배열탐촉자에서 수신된 신호를 시간지연을 가지고 합성하여 유도초음파의 모드를 선택적으로 수신하였다. 그 결과, 이웃한 요소 탐촉자 사이의 구동시간 간격을 바꿈으로서 원하는 모드의 유도초음파를 선택적으로 발생시킬 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제9권3호
• /
• pp.243-248
• /
• 1999

Ultrasonic wave technology was employed to improve filtration performance and ethanol production in a bioreactor equipped with an internal ceramic-membrane filter module. The filtration performance was found to depend on the power and the pattern of ultrasonic wave irradiation. Under the optimized conditions (irradiation time: 25 see, period: 5 min, and ultrasonic power: 60 W), the flux was improved with the periodic-pause method by 200-700％ compared with the control (with no irradiation), while the improvement was only 30 to 90％ without the periodic-pause method. The final ethanol concentration also increased slightly. However, in a more severe condition (irradiation time: 2.5 min, period: 5 min, and ultrasonic power: 110 W), the irradiation of ultrasonic waves was observed to disturb cell integrity and viability, and thus to decrease ethanol production.

• 상하수도학회지
• /
• 제30권3호
• /
• pp.343-350
• /
• 2016

Membrane distillation (MD) is a novel separation process that have drawn attention as an affordable alternative to conventional desalination processes. However, membrane fouling and pore wetting are issues to be addressed prior to widespread application of MD. In this study, the influence of ultrasonic irradiation on fouling and wetting of MD membranes was investigated for better understanding of the MD process. Experiments were carried out using a direct contact membrane distillation apparatus Colloidal silica was used as a model foulants in a synthetic seawater (35,000 mg/L NaCl solution). A vibrator was directed attached to membrane module to generate ultrasonic waves from 25 kHz (the highest energy) to 75 kHz (the lowest energy). Flux and TDS for the distillate water were continuously monitored. Results suggested that ultrasonic irradiation is effective to retard flux decline due to fouling only in the early stage of the MD operation. Moreover, wetting occurred by a long-term application of ultrasonic rradiation at 75 kHz. These results suggest that the conditions for ultrasonic irradiation should be carefully optimized to maximize fouling control and minimize pore wetting.