• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.7-10
• /
• 2010

In this paper, we design a modem SoC (System on Chip) for low power consumption and high speed wireless communications. Among various schemes of high speed communications, an MB-OFDM (Multi Band-Orthogonal Frequency Division Multiplexing) UWB (Ultra-Wide-Band) chip is designed. The MB-OFDM uses wide-band frequency to provide high speed data rate. Additionally, the system imposes no interference to other services. The 90nm CMOS (Complementary Metal-Oxide Semiconductor) technology is used for the SoC design. Especially, power management mode is implemented to reduce the power consumption.

• 동력기계공학회지
• /
• 제14권3호
• /
• pp.58-63
• /
• 2010

A laser beam welding and an electric arc welding were combined, and the positive points of each welding method are drawn such as high speed, low thermal load, deep penetration, and high productivity. The fiber laser-MIG conjugated welding. namely the hybrid welding has been studied mainly for the automation industry of a pipeline welding. In this study, the MIG welding was combined with a fiber laser welding to make up the hybrid welding. The weld shapes, microstructures and mechanical properties for weld zones after the hybrid welding or only fiber laser welding were investigated on the 700 MPa grade Ultra Fine Grained(UFG) high strength steel. The amount of acicular ferrite in weld metals and HAZ(heat affected zone) was observed larger after hybrid welding compared with after only laser welding. The Vickers hardness of the top area of the fusion zone after fiber laser welding was higher compared with after hybrid welding.

• Journal of Power Electronics
• /
• 제6권2호
• /
• pp.139-145
• /
• 2006

This paper describes the ultra precise position estimation of a servomotor using a sinusoidal encoder based on Arcsine Interpolation Method for the cost reduction of circuit design. The amplitude and offset errors of the sinusoidal encoder output signals, from the encoder itself and analog signal processing procedures, are effectively compensated and on-line tuned by utilizing a low cost programmable differential amplifier without any special expensive equipment. For a theoretical evaluation of the practical resolution of this system, the relationship between the amplitude of ADC(Analog to Digital Converter) input signal errors and the anticipated resolution is also addressed. The performance of the proposed method is verified by comparing it with speed control characteristics of the servomotor driving system using a digital incremental 50,000ppr encoder in the experiments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.446-449
• /
• 2003

In recent years, the research of an efficient transmission method is going to meet a demand for high speed and large capacity radio communication. These systems make use of ultra-short duration pulses which yield UWB(Ultra Wide Band) signals characterized by low power spectral densities. The wavelet synthesis wave is able to set up the scale freely. So it is possible to use as the transmission wave of UWB by compressing time. In this paper, we present a general analytical expression for the average BER(Bit Error Rate) performance of UWB data transmission using wavelet system as a function of the cross-correlation between the users' signatures in an additive white Gaussian noise(AWGN) channel.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.5-10
• /
• 2013

Diesel engines have the advantages of good fuel efficiency and low emissions. Therefore, car makers have been developed various kinds of diesel engine management system to clean up emissions while improving fuel efficiency. One of them is the common rail system. In the common rail system, diesel fuel is injected into the combustion chamber at ultra high pressures up to 1,800 bar to ensure more complete combustion for cleaner exhaust gas, and highly precise multiple injection reduces NOx emission, combustion noise and vibration. Generally speaking, common rail system consists of booster pump, high pressure pump, common rail, injectors, control valves, and sensors. The high pressure pump receives low pressure fuel from the booster pump and supply high pressure fuel to injectors through the high pressure common injection rail. Therefore, high pressure pump has an important role in common rail system. In this paper, we have investigated the performance of high pressure pump of common rail system.

• 한국전자통신학회논문지
• /
• 제17권4호
• /
• pp.595-606
• /
• 2022

한국은 단위기 발전기 용량 1.4 GW, 20 GW를 초과하는 몇 개 지역의 대단위 발전단지, 대단위 발전단지에서 발전력을 인출하는 2~3개의 초고압 송전선로, 비수권에서 수도권으로 발전력을 수송하는 6개의 초고압 송전선로 구성 등 대용량 발전, 대규모 송전시스템 등 전통적인 전력계통 시스템의 특징을 가지고 있다. 이런 전력계통 특성으로 신재생에너지 진입 단계는 낮으나 주파수 안정도 문제 등으로 일부 발전기 출력 감발을 시행하고 있으며 향후 신재생에너지 확대 정책으로 전력계통 안정도 유지 문제가 가장 중요한 현안으로 떠오를 전망이다. 태양광, 풍력발전 같은 비관성 인버터 기반 신재생에너지 급증시 독립계통에서 전력계통 안정도를 향상시키는 수단은 Natural 관성 자원인 동기조상기와 가상 관성 자원인 BESS를 계통에 설치하는 것이다. 본 연구에서는 신재생에너지가 계통안정도에 미치는 영향을 분석하고 최저주파수를 유지하기 위한 BESS 효과를 계통 모의를 통하여 분석하였다. 발전제약 용량에 따른 BESS 효과는 최대 122.81%에 도달하는 것을 확인하였다.

• 한국항행학회논문지
• /
• 제11권3호
• /
• pp.274-280
• /
• 2007

초 광대역 신호는 상대적으로 낮은 주파수에서 매우 넓은 대역폭을 갖는 방사 스펙트럼을 특징으로 하고 있다. 본 논문에서는 잡음과 동일채널간섭 채널에서 M-ary 상관 수신기 구조로 된 초 광대역 시스템의 비트 오율, 패킷 오율, 데이터 처리율 성능을 분석한다. UWB 시스템의 성능을 평가하기 위하여 하나 이상의 펄스 위치 변조 신호로 구성된 UWB 통신 파형을 사용하였다. 본 논문에서 사용된 M-ary PPM 신호는 시스템 성능 해석의 간략화를 위하여 균일하게 상관된 PPM 신호를 정의하였다. 시스템 성능의 해석을 통하여 무선 채널 에러는 처러율 성능을 감소시키며 hybrid ARQ 기법을 통하여 효과적으로 증가시킬 수 있음을 알 수 있었다. 또한, 성능 개선 기법과 사용된 파라미터를 통하여 초 광대역 시스템의 데이터 처리율 비교를 수행하였다. 성능 평가 과정을 통하여 무선 채널과 hybrid ARQ 기법의 영향을 신호 대 잡음 전력비에 따른 PER 및 처리율을 평가하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1649-1651
• /
• 2002

Ultra-wide bandwidth (UWB) detection method has been widely used as a front end detection scheme for the ultra-high frequency (UHF) partial discharge (PD) monitoring systems. A broad-band video detector module was developed and characterized for the UHF UWB PD detection systems. The useable bandwidth of the module is more than 2 GHz and it is optimized for 50-ohm systems. The detection sensitivity and dynamic range of the module were characterized by using a known ns-width RF pulses of GHz range. The dynamic range is more than 6-decades and the module can detect pulsed RF signals down to 1 nW. The detector module can eliminate expensive equipment such as high speed oscilloscopes and radio frequency (RF) spectrum analyzers. Therefore, it enables one to use slow speed data acquisition systems for the PD monitoring at the UHF range. The detector module was used to detect real PDs of about <3 pC. The module converts the UWB PD signals into a low-bandwidth video signal with a high signal-to-noise ratio.

• 한국컴퓨터정보학회논문지
• /
• 제29권3호
• /
• pp.75-81
• /
• 2024

본 논문은 딥러닝 모델이 포함된 TinyML(Tiny Machine Learning)를 초저전력 시스템에 탑재하여, 층간소음 문제를 실시간으로 처리하는 방법을 제시한다. 이 방법이 가능한 이유는 딥러닝 모델 경량화 기술로 인해 컴퓨팅 리소스가 작은 시스템도 자체적으로 추론을 수행 할 수 있기 때문이다. 기존에 층간소음 문제를 해결하기 위해 제시됐던 방법은 센서에서 수집한 데이터를 서버로 보내어 데이터를 분석한 후에 처리하는 방법 이었다. 하지만 이러한 중앙 처리 방법은 구축 비용이 비싸고 복잡하며, 실시간 처리가 어려운 문제가 있다. 이러한 한계점을 본 논문에서는 TinyML을 사용한 On-Sensor AI(Artificial Intelligent) 로 해결하였다. 본 논문에서 제시한 방법은 시스템 설치가 간단하고 저비용 이면서 문제를 실시간적으로 처리할 수 있다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권1호
• /
• pp.90-94
• /
• 2020

Artificial intelligence (AI) is software that learns large amounts of data and provides the desired results for certain patterns. In other words, learning a large amount of data is very important, and the role of memory in terms of computing systems is important. Massive data means wider bandwidth, and the design of the memory system that can provide it becomes even more important. Providing wide bandwidth in AI systems is also related to power consumption. AlphaGo, for example, consumes 170 kW of power using 1202 CPUs and 176 GPUs. Since more than 50% of the consumption of memory is usually used by system chips, a lot of investment is being made in memory technology for AI chips. MRAM, PRAM, ReRAM and Hybrid RAM are mainly studied. This study presents various memory technologies that are being studied in artificial intelligence chip design. Especially, MRAM and PRAM are commerciallized for the next generation memory. They have two significant advantages that are ultra low power consumption and nearly zero leakage power. This paper describes a comparative analysis of the four representative new memory technologies.