• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1398-1400
• /
• 2002

A new PLF-BLU (Plastic Light Fiber-Back Light Unit) using side glowing light fiber rods array for the 42" LCD TV display has been evelopedd. The light fibers were 14mm in diameter and 50cm long pure transparent acrylic rods of 1.49 refractive index. Fine seratees were made on the flat side of rod. extremely bright incandscent light from lamp fed into the fiber si scattered at scratches then emerges through the surface of rod. A typical PLF-BLU system consists of 24 PLFs produced side glow of brightness of 4,500cd/㎡ to 6,500cd/㎡. New PLF-BLU is proved to be a BLU of rigid, bright, no heat generation, and low power consumption, hence a prospective BLU system for very and/or ultra large size TVs. A new LED-PLF-BLU system considered to be a revolutionary to break-through of the BLU technologies has also been developed, and is decribed briefly.

• Current Optics and Photonics
• /
• 제6권4호
• /
• pp.375-380
• /
• 2022

We demonstrate two types of light field displays based on waveguide grating coupler arrays: a line beam type and a point source type. Ultra violet imprinting of an array of diffractive nanograting cells on the top surface of a 50-㎛-thin slab waveguide can deliver a line beam or a point beam to a multidirectional light field out of the waveguide slab. By controlling the grating vectors of the nanograting cells, the waveguide modes are externally coupled to specific viewing angles to create a multidirectional light field display. Nanograting cells with periods of 300 nm-518 nm and slanted angles of -8.5°~+8.5° are fabricated by two-beam interference lithography on a 40 mm × 40 mm slab waveguide for seven different viewpoints. It is expected that it will be possible to realize a very thin and flexible panel that shows multidirectional light field images through the waveguide-type diffraction display.

• 대한토목학회논문집
• /
• 제33권6호
• /
• pp.2593-2600
• /
• 2013

본 연구는 최근 국내외에서 문화재 보존, 사고현황조사, 군 정찰업무, 재난관리 등 다양한 분야에서 활용되고 있는 초경량 고정익무인항공기 사진측량의 성능평가를 다루고자 한다. 항공삼각측량 결과, 위치(X, Y)에서 RMSE 값은 약 10 cm로 나타났으며, UAV 사진측량의 정사영상에 대한 시각판독법(on-screen digitizing) 기법과 지상측량에 의한 필계점 좌표 차의 RMSE 는 X 방향 약 0.174~0.205 m, Y방향 약 0.294~0.298 m의 편위형 오차가 도출되었다. 그리고 실험대상지역의 임의의 1 필지를 대상으로 지적 공부대장면적과 UAV 사진측량의 정사영상으로 취득한 필지 면적을 비교한 결과 차이는 0.118 $m^2$이다. 본 연구는 초경량 고정익무인항공기 사진측량의 정사영상 정확도 평가에 대한 하나의 연구 사례를 제시하였으며, 향후 항공삼각측량(AT), 직접 기하보정(direct-georeferencing), 비행계획, 그리고 실용적 응용분야 개발 등에 대한 연구가 지속되어야 할 것으로 판단된다.

• 한국융합학회논문지
• /
• 제11권1호
• /
• pp.237-246
• /
• 2020

본 연구의 배경 및 문제는 초경량비행장치 산업의 발전으로 드론의 성능이 향상되고 운행 대수는 증가하는 반면에 비행 인·허가 과정은 개선되지 않아 민원이 증가하는 추세에 있다. 목적은 민원을 최소화하고 양개기관 요구조건에 맞게 시스템 운용 및 관리 전반에 대한 개선이다. 연구방법은 문헌연구 및 조사를 통하여 문제점을 도출하고 기관 및 전문가들의 포커스 그룹 인터뷰를 통해 검증하여 개선안을 제시하였다. 연구결과는 국토부 주관 하 항공안전법 내에 양개기관 임무·역할 및 시스템 운용·관리에 대한 반영, 비행 인·허가에 대한 명칭·절차·양식의 통합, 시스템 상에 홈페이지 바로가기 등 다수의 기능개선이다. 기대효과는 첫째, 관련법령에 양개기관의 임무와 역할을 명시함으로서 민원처리 협조가 원활해지며 둘째, 민원처리 프로세스를 통합함으로서 처리 기간단축으로 효율성이 향상되고 셋째, 대국민서비스 부가기능을 개선함으로서 민원 최소화가 기대된다. 향후 연구는 국방부 주관 하 항공촬영허가에 대한 제도적 기반마련, 국방개혁 2.0연계 관할부대 재편성, 현장 보안조치부대 여건보장 등 개선이 필요하다.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.34-39
• /
• 2000

Application of ceramics has grown considerably due to significant improvement in their mechanical properties such as light weight, chemical stability and superior wear resistance. Despite these character, the use of ceramics has not increased because of poor machinability. The method of using of super-abrasives metal bond wheel was proposed. But it is difficult that super-abrasives metal bond wheel can be dressed. Recently, the technology of in-process electrolytic dressing is developed to solve this problem. If this method is applied, loading and glazing are disappeared apparently. The aim of this study is to determine the machining characteristics in terms of lapping wheel speed, machining time, pressurized weight to the workpiece and peak current using in-process electrolytic dressing applied to the CIB-diamond lapping wheel to achieve ultra-precision lapping machining technique.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.175-183
• /
• 2005

In recent years, as the demands of VBNS and VDSL increase, the development of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, and WDM elements increases. The alignment and the attachment technology are very important in the fabrication of optical elements. In this Paper, the optical alignment characteristic of multi-axis ultra precision stage is studied. The alignment algorithms are studied for applying to the ultra precision multi-axis stage. The alignment algorithm is comprised of field search and peak search algorithms. The contour of optical power signals can be obtained by field search and the precise coordinate can be found out by peak search. Three kinds of alignments, such as 1 ch. input vs. 1 ch. output optical stack, 1 ch. input vs. 8 ch. output PLC stacks, and ferrule vs. ferrule, are performed for investigating the alignment characteristics.

• 소성∙가공
• /
• 제19권8호
• /
• pp.474-479
• /
• 2010

Newly suggested hybrid LED package can reduce the number of LED processes and enhance light efficacy in virtue of its integrated optical patterns. Square-type pyramid pattern was chosen for the integrated optical pattern in this study, and it was proved that the pattern enhances illuminance about three times and luminance about two and half times by optical simulation. Square-type pyramid patterns of 0.02mm height and 0.04mm pitch were successively machined on a copper mold which is necessary for imprinting the integrated pattern. Hybrid LED package with integrated optical pattern will be manufactured with ultra-fine machined mold in future study.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1469-1474
• /
• 2007

In recent years, research to machine large-surface micro-features has become important because of the light guide panel of a large-scale liquid crystal display and the bipolar plate of a high-capacity proton exchange membrane fuel cell. In this study, in order to realize the systematic design technology and performance improvements of an ultra-precision machine for machining the large-surface micro-features, a structural characteristic analysis was performed using its virtual prototype. The prototype consisted of gantry-type frame, hydrostatic feed mechanisms, linear motors, brushless DC servo motor, counterbalance mechanism, and so on. The loop stiffness was estimated from the relative displacement between the tool post and C-axis table, which was caused by a cutting force. Especially, the causes of structural stiffness deterioration were identified through the structural deformation analysis of sub-models.

• 열처리공학회지
• /
• 제17권2호
• /
• pp.78-86
• /
• 2004

Effects of the annealing parameters on the formation of ferrites transformed at low temperatures were studied in cold-rolled ultra low carbon steels with niobium and/or chromium. Niobium and chromium were found to be effective in the formation of the low temperature transformation ferrites. The low temperature transformation ferrites more easily formed when both higher annealing temperature and longer annealing time, allowing substitutional alloying elements to distribute between phases, are in combination with faster cooling rate. It was found from EBSD study that the additions of niobium or chromium resulted in the increase in the numbers of high angle grain boundaries and the decrease in those of the low angle grain boundaries in the microstructures. Both granular bainitic ferrite and bainitic ferrite were characterized by the not clearly etched grain boundaries in light microscopy because of the low angle grain boundaries.

• Journal of Communications and Networks
• /
• 제8권2호
• /
• pp.151-157
• /
• 2006

In a continuously expanding wireless world, the number of radio systems increases every day and efficient spectrum usage becomes a more significant requirement. Ultra-wideband (UWB) and cognitive radio are two exciting technologies that offer new approaches to the spectrum usage. The main objective of this paper is to shed the first light on the marriage of these two important approaches. The strength of orthogonal frequency division multiplexing (OFDM) based UWB in co-existing with licensed systems is investigated. The opportunity concept is defined, and the requirements of the opportunistic spectrum usage are explained. It is proposed to take the UWB-OFDM from the current underlay implementation, and evolve it to a combined underlay and opportunistic spectrum usage technology, leading to cognitive UWB-OFDM. This way, we aim at making UWB more competitive in the wireless market with extended range, higher capacity, better performance, and a wide variety of applications.