• Structural Engineering and Mechanics
• /
• 제73권5호
• /
• pp.585-598
• /
• 2020

We develop design model within which nucleation and propagation of crack in a fibrous composite is described. It is assumed that under loading, crack initiation and fracture of material happens in the composite. The problem of equilibrium of a composite with embryonic crack is reduced to the solution of the system of nonlinear singular integral equations with the Cauchy type kernel. Normal and tangential forces in the crack nucleation zone are determined from the solution of this system of equations. The crack appearance conditions in the composite are formed with regard to criterion of ultimate stretching of the material's bonds. We study the case when near the fiber, the binder has several arbitrary arranged rectilinear prefracture zones and a crack with interfacial bonds. The proposed computational model allows one to obtain the size and location of the zones of damages (prefracture zones) depending on geometric and mechanical characteristics of the fibrous composite and applied external load. Based on the suggested design model that takes into account the existence of damages (the zones of weakened interparticle bonds of the material) and cracks with end zones in the composite, we worked out a method for calculating the parameters of the composite, at which crack nucleation and crack growth occurs.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.776-783
• /
• 2019

Laser welding is usually a more effective method than electron-beam one since a vacuum chamber is not required. It is important for joining Zr-1%Nb (E110) alloy in a manufacturing process of nuclear fuel rods. In the present work, effect of energy parameters of pulsed laser welding on properties of butt joints of sheets with a thickness of 0.5 mm is investigated. The most efficient combination has been found (8-11 J pulse energy, 10-14 ms pulse duration, 780-810 W peak pulse power, 3 Hz pulse frequency, 1.12 mm/s welding speed). The results show that ultimate strength under static loading can not be used as a quality criterion for zirconium alloys welds. Increased shielding gas flow rate does not allow to protect weld metal totally and contributes to defect formation without using special nozzles. Several types of imperfections of the welds have been found, but the major problem is branching microcracks on the surface of the welds. It is difficult to identify the cause of their appearance without additional research on improving the welding zone protection (gas composition and flow rate as well as nozzle configuration) and studying the hydrogen content in the welds.

• Structural Engineering and Mechanics
• /
• 제70권4호
• /
• pp.431-443
• /
• 2019

The present paper illustrates a numerical investigation on the failure behaviour of ring-stiffened cylinder subjected to external hydrostatic pressure. The published test data of steel welded ring-stiffened cylinder are surveyed and collected. Eight test models are chosen for the verification of the modelling and FE analyses procedures. The imperfection as the consequences of the fabrication processes, such as initial geometric deformation and residual stresses due to welding and cold forming, which reduced the ultimate strength, are simulated. The results show that the collapse pressure and failure mode predicted by the nonlinear FE analyses agree acceptably with the experimental results. In addition, the failure mode parameter obtained from the characteristic pressure such as interframe buckling pressure known as local buckling pressure, overall buckling pressure, and yield pressure are also examined through the collected data and shows a good correlation. A parametric study is then conducted to confirm the failure progression as the basic parameters such as the shell radius, thickness, overall length of the compartment, and stiffener spacing are varied.

• Geomechanics and Engineering
• /
• 제25권2호
• /
• pp.111-121
• /
• 2021

Large deformation and rapid pressure propagation take place inside the rock mass under the dynamic loads caused by the explosives, on quarry faces in order to extract aggregate material. The complexity of the science of rock blasting is due to a number of factors that affect the phenomenon. However, blasting engineering computations could be facilitated by innovative software algorithms in order to determine the results of the violent explosion, since field experiments are particularly difficult to be conducted. The present research focuses on the design of a Finite Element Analysis (FEA) code, for investigating in detail the behavior of limestone under the blasting effect of Ammonium Nitrate & Fuel Oil (ANFO). Specifically, the manuscript presents the FEA models and the relevant transient analysis results, simulating the blasting process for three types of limestone, ranging from poor to very good quality. The Finite Element code was developed by applying the Jones-Wilkins-Lee (JWL) equation of state to describe the thermodynamic state of ANFO and the pressure dependent Drucker-Prager failure criterion to define the limestone plasticity behavior, under blasting induced, high rate stress. A progressive damage model was also used in order to define the stiffness degradation and destruction of the material. This paper performs a comparative analysis and quantifies the phenomena regarding pressure, stress distribution and energy balance, for three types of limestone. The ultimate goal of this research is to provide an answer for a number of scientific questions, considering various phenomena taking place during the explosion event, using advanced computational tools.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.89-102
• /
• 2021

Rapid construction of prefabricated bridges requires minimizing the field work of precast members and ensuring structural stability and constructability. In this study, we conducted experimental and analytical investigations of transverse joints of prefabricated T-girder bridge superstructures to verify the flexural performance and serviceability. In addition, we conducted parametric studies to identify the joint parameters. The results showed that both the segmented and continuous specimens satisfied the ultimate flexural strength criterion, and the segmented specimen exhibited unified behavior, with the flexural strength corresponding to that of the continuous specimen. The segmented specimens exhibited elastic behavior under service load conditions, and the maximum crack width satisfied the acceptance criteria. The reliability of the finite element model of the joint was verified, and parametric analysis of the convexity of the joint section and the compressive strength of the filler concrete showed that the minimum deflection and crack width occurred at a specific angle. As the strength of the filler concrete increased, the deflection and crack width decreased. However, we confirmed that the reduction in the crack width was hardly observed above a specific strength. Therefore, a design suitable for prefabricated bridges and accelerated construction can be achieved by improving the joint specifications based on the required criteria.

• 대한조선학회지
• /
• 제25권4호
• /
• pp.69-80
• /
• 1988

본(本) 논문(論文)에서는 미소(微小)한 초기(初期)처짐을 가진 실제적(實際的)인 판요소(板要素)를 대상(對象)으로 수압(水壓)과 압축력(壓縮力)을 동시(同時)에 받는 경우의 탄성좌굴(彈性挫屈) 및 최종강도(最終强度)를 평가(評價)하기 위한 간이추정식(簡易推定式)을 이론적(理論的)으로 도출(導出)한다. 좌굴강도추정식(挫屈强度推定式)의 도출(導出)에 있어서는 최소 (最小)포텐샬에너지 원리(原理)를 적용(適用)하여 종횡비(縱橫比)와 수압(水壓)의 크기를 변화(變化)시킨 시리즈 계산(計算)을 수행(遂行)하고, 이 결과(結果)를 바탕으로 하중(荷重)과 종횡비(縱橫比)에 관한 연속함수(連續函數)로서 근사추정식(近似推定式)을 도출(導出)한다. 한편, 최종강도추정식(最終强度推定式)의 도출(導出)에 있어서는 막응력분포(膜應力分布)를 explicit form으로 나타내기 위하여 수압(水壓) 또는 압축력(壓縮力)을 단독으로 받는 판요소(板要素)에 대한 탄성대변형(彈性大變形) 해석(解析)에 의하여 각각(各各)의 응력분포(應力分布)를 구(求)하고, 이들의 선형합(船型合)에 의하여 수압(水壓)과 압축력(壓縮力)이 동시에 작용(作用)하는 경우의 전체적(全體的)인 응력분포(應力分布)를 계산(計算)하며, Mises의 항복조건(降伏條件)을 적용(適用)하여 추정식(推定式)을 도출(導出)한다. 본(本) 제안식(提案式)에 의한 좌굴(挫屈) 및 최종강도추정치(最終强度推定値)는 비교적(比較的) 작은 수압작용하(水壓作用下)에서는 실험(實驗)이나 다른 해석결과(解析結果)와 잘 일치(一致)하고 있으나, 큰 수압작용하(水壓作用下)에서는 최종강도(最終强度)를 다소과대평가(多少過大評價)하는 경향(傾向)을 나타내고 있다. 이것은 수압(水壓)과 압축력(壓縮力)이 동시(同時)에 작용(作用)하는 경우의 응력분포(應力分布)를 각각(各各)의 선형합(船型合)에 의하여 구(求)하고, 상관관계(相關關係)를 고려(考慮)하지 않은데 주원인(主原因)이 있다. 그러나, 실제선박(實際船舶)의 판요소(板要素)에 작용(作用)하는 수압(水壓)의 크기는 슬래밍등에 의한 충격압(衝擊壓)을 제외(除外)하고는 비교적(比較的) 작으므로, 본제안식(本提案式)은 실용적(實用的)인 범위내(範圍內)에서는 충분(充分)한 정도(精度)의 결과(結果)를 준다고 생각된다.

• 무역상무연구
• /
• 제38권
• /
• pp.3-45
• /
• 2008

A motive and aim of enactment of UN Convention on the Use of Electronic Communication in Int'l Contracts is based on need to eliminate legal obstacles that might arise under existing int'l trade law instruments and promote int'l electronic commercial transaction. But when it is used with related articles, 14, 15, 16, 17 for offer under CISG, one of the most successful conventions which produces substantive law for the unification of int'l trade, questions of practical importance, for example possibilities of withdrawal, revocation, rejection of offer, the extent of its criteria arise from therewith. In conclusion, a effective electronic offer has to assure easily access and confirmation of trade terms besides criteria of offer under CISG. An offer can be withdrawal, if electronic message of withdrawal has entered the offeree's server before or at the same time when the offer has reached the offeree but agreement expressly or impliedly, between the parties about type, format, email address is a prerequisited. Implied consent could be presumed through prior conduct or trade usages between the parties under CISG articles 8, 9. The term "have reached" correspond to the time which is able to retrieve the electronic message of withdrawal. But without express or implied agreement between them about electronic communication of type, format, email address, an offer can be withdrawal before or at the same time when it has entered offeree's other e-mail address and confirmed by his retrieval. In case of the revocation, electronic message of the revocation is effective before the offeree's dispatching an acceptance. A prerequisite for the revocation by electronic communication is came as the above mentioned withdrawal except for concept of a time difference for reach. In case of a rejection of offer, when a rejection by electronic communication has entered the offeror's server, an offer is ended. But a prerequisite for the rejection by electronic message is same as the above mentioned withdrawal and revocation.

• 한국지진공학회논문집
• /
• 제2권4호
• /
• pp.115-122
• /
• 1998

고력볼트로서 슬립이 발생치 않도록 설계된 철골모멘트골조의 보 이음부의 내진거동을 반복재하 실물대 실험을 통하여 평가하였다. 예상과는 달리 모메트 접합부가 극한 소성강도에 도달하기 훨씬 이전에 보 이음부의 슬립이 발생하였다 실험을 통하여 관측된 마찰계수는 규준 공칭값의 50-60%에 불과하였다. 그러나 보 플랜지의 열영향부가 파단에 이르기 까지 슬립 이후의 지압거동을 통하여 증가되는 반복하중을 성공적으로 모멘트접합부로 전달하였다. 즉 반복하중 하에서도 보 이음부의 슬립이 곧바로 구조적 일체성의 상실로 이어지지는 않음이 관측되었다 볼토구멍을 공제한 보 플랜지 유효단면적의 전강도에 기준한 전통적 보 이음부 설계법에 의할 경우 모멘트 접합부의 소성강도 발현 이전에 보 이음부의 슬립발생 가능성이 높다 본 연구에서는 역량설계 개념에 기초하여 강진 작용시의 보 이음부의 설계와 관련한 추가 고려사항을 제안하였다.

• Composites Research
• /
• 제14권6호
• /
• pp.16-23
• /
• 2001

인발 와인딩에 의한 섬유강화 복합재료 중공 봉의 기계적 거동해석을 수행하였다. 이 목적의 수행을 위해 새롭게 제작된 와인더를 전통적 인발 시스템에 부탁하여 시편을 제작하였다. 또한 인발-와인딩된 시편을 제작할 수 있는 새로운 공법을 개발하였다. 이 연구를 위해 유한요소 해석 프로그램 POSTII를 확장 개발하였다. 비선형유한요소 수식화에는 2차 피올라-키르히호프 응력 텐서와 그린 변형률 텐서에 기초한 업데이트된 라그란지언 표현법이 사용되었다. 복합재료 중공봉의 유한요소 모델링을 위해 8절점 응축쉘요소를 사용하였다. 파손평가를 위해 모든 유한요소의 각 단층에서의 평균응력을 최대음력 판정법에 대입하였다. 수치해석 예로서 불포화 섬유강화 복합재료 중공 봉의 기계적 거동을 초기 하중상태에서 최종 붕괴가지 조사하였다. 파손에 따른 강성저하와 응력제하를 고려한 유한요소해석 결과는 극만 하중과 파손 및 변형에서 실험치와 잘 일치하였다.

• 복식
• /
• 제24권
• /
• pp.217-233
• /
• 1995

The ultimate purpose of this study is to suggest the most effective marketing strategy for the clothing consumer market based on the new generation consumer's clothing selection behavior analysis. In this thesis, it is appempted to make a progress in the new gen-eration consumer's clothing life style types, in clothing purchase behavior analysis among the clothing life style, and also in the marketing strategy for marketers. The subjects selected for the final analysis are 412 the new gerneration women of age 20 thru 34 in seoul and satellite town area. Data were processed the spss package program. As for the analytic method, factor analysis, clustering analysis, XCross-tubulation, F-test with ANOVA, frequency and percentage were applied in the survey. The major findings are as following : life style is classified into four types : The characteristic fashion-directory type(25.7%) ; The reason traditional type(9.0%) ; The sen-sitivity fashion-following type(11.0%) ; The community brand-conscious type(54.3%). 2 Clothing life style types characteristic of the new generation consumer proved that clothing life style types are a significant difference according to the life style, the fashion consciousness and the average monthly spend-ing on clothing. 3. There is an important discrimination according to the clothing life style types in their clothing purchase behavior such as infor-mation usage, clothing choice criterion and brand loyalty. 4. Based on the result of our analysis and the review of literature, the marketing strategy is suggested that characteristic and new design development is efficient way to consumer's purchase need. Therefore apparel industary which pursue an added value must frame marketing strategy on the basis of the target consumer's sensitivity characteristic according to the life style and fashion consciousness.