• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.312-333
• /
• 2006

This paper presents the results of an analysis of the excess porewater pressure distribution due to piezocone penetration in overconsolidated clays. From piezocone test results for moderately and heavily overconsolidated clays, it was observed that the excess porewater pressure increases monotonically from the piezocone surface to the outer boundary of the shear zone and then decreases logarithmically to the outer boundary of the plastic zone. It was also found that the size of the shear zone decreases from approximately 2.2 to 1.5 times the cone radius with increasing OCR, while the plastic radius is about 11 times the piezocone radius, regardless of the OCR. The equation developed in this study based on the modified Cam clay model and the cylindrical cavity expansion theory, which take into consideration the effects of the strain rate and stress anisotropy, provide a good prediction of the initial porewater pressure at the piezocone location. The method of predicting the spatial distribution of excess porewater pressure proposed in this study is based on a linearly increasing ${\Delta}u_{shear}$. In the shear zone and a logarithmically decreasing ${\Delta}u_{oct}$, and is verified by comparing with the excess porewater pressure measured in overconsolidated specimens at the calibration chamber.

• 지구물리
• /
• 제9권3호
• /
• pp.209-217
• /
• 2006

The major continental blocks in NE-Asia are the North China Block and the South China Blo, which have collided, starting from the Korean peninsula. The suture zone in NE China between two blocks is well defined from the QinIing-Dabie-Orogenic Belt to the Jiaodong (Sulu) Belt by the geological and geophysical interpretation. The discovery of high pressure metamorphic rocks in the Hongsung area of the Korean peninsula can be used to estimate the suture zone. This indicates that the suture zone in the Jiaodong Belt might be extended to Hongsung area. However, due to the lack of geological and geophysical data over the Yellow sea, the extension of the suture zone to the Korean peninsula across the Yellow Sea is obscure. To find out the tectonic relationship between NE China and the Korean peninsula it is necessary to complete U-ie homogeneous geophysical dataset of NE Asia, which can be provided by satellite observations. The CHAMP lithospheric magnetic field (MF3) and CHAMP-GRACE gravity field, combined with surface measured data, allow a much more accurate in-ference of tectonic structures than previously available. The CHAMP magnetic anomaly map reveals significant magnetic lows in the Yellow Sea near Nanjing and Hongsung, where are characterized by gravity highs on U-ie CHAMP-GRACE gravity anomaly map. To evaluate the depth and location of poten-tial field anomaly causative bodies, the Euler Deconvolution method is implemented. After comparing the two potential field solutions with the simplified geological map containing tectonic lines and the distribution of earthquakes epicenters, it is found that the derived structure boundaries of both are well coincident with the seismic activities as well as with the tectonic lineaments. The interpretation of the CHAMP satellite magnetic and GRACE satellite gravity datasets reveal two tectonic boundaries in U-ie Yellow Sea and the Korean peninsula, indicating U-ie norttiern and southern margins of the suture zone between the North China Block and the South China Block. The former is extended from the Jiaodong Belt in East China to the Imjingang Belt on the Korean peninsula, the later from Nanjing, East China, to Hongsung, the Korean peninsula. The tectonic movement in or near the suture zone might be responsible for the seismic activities in the western region of the Korean Peninsula and the development of the Yellow Sea sedimentary basin.

• 한국공간구조학회논문집
• /
• 제18권3호
• /
• pp.117-124
• /
• 2018

In the post-tensioned concrete member, additional reinforcement is required to prevent failure in the anchorage zone. In this study, the details of reinforcement suitable for the anchorage zone of the post-tensioned concrete member using circular anchorage was proposed based on the experimental results. The tests were conducted with the compressive strength of concrete and reinforcement types as variables. The experimental results indicated that the additional reinforcement for the anchorage zone is required when the compressive strength of concrete is less than 17.5 MPa. U-shaped reinforcement shows most effective performance in terms of maximum strength and cracks patterns.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.193-195
• /
• 2011

강판재 사용에 있어 수소취성현상은 강판재가 고강도화됨에 따라 그 감수성이 커지는 것으로 알려져 있다. 특히 노출강판재의 경우, 표면으로부터 침투해 들어가는 수소에 의한 수소취화 거동에 대한 연구가 필요하다. 본 연구에서는 고강도 DP강을 시험편으로 하여, 음극전기분해법에 의해 수소를 강제주입시킨 후, DP강 표면하 subsurface zone의 수소취화 거동을 평가하고자 하였다. 미소경도분포 측정결과, 수소주입시간이 증가함에 따라 표면하 subsurface zone의 경도 또한 증가하는 것으로 조사되었다. 이는 수소에 의해 표면하 subsurface zone의 경화가 일어나 DP강의 기계적 특성에 영향을 미친것으로 판단된다. 미소경도분포의 측정결과와 미세조직 관찰결과로부터 수소임계침투깊이를 평가하였고, 이를 통해 DP강내 수소확산에 의한 수소임계침투깊이가 존재함을 확인할 수 있었다.

• 교통기술과정책
• /
• 제6권3호
• /
• pp.219-228
• /
• 2009

• 분석과학
• /
• 제21권6호
• /
• pp.487-494
• /
• 2008

극미량 우라늄시료에 대한 열이온화 질량분석기를 이용하여 우라늄 동위원소 비 측정 및 정량과 관련하여 고순도(zone refined) 레늄필라멘트와 일반 레늄필라멘트로부터 오는 바탕값(background) 특성을 비교하였다. 두 종류 필라멘트에서 가벼운 알칼리금속원소들의 클러스터(cluster)인 $(^{39}K_6)^+$, $(^{39}K_5+^{41}K)^+$ 및 금속산화물($PbO_2$)로 추측되는 우라늄 동중원소영향(isobaric effect)을 확인하였다. 고순도 레늄필라멘트를 < $10^{-7}$ torr에서 약 $2000^{\circ}C$로 1.5 시간 이상 degassing 함으로 불순물들을 완전히 제거할 수 있었으나 일반 레늄필라멘트의 경우 5시간 이상 degassing을 하여도 약 3 pg-U이 남아있었다. 일반 레늄필라멘트에 대한 불순물 제거(degassing) 실험결과 5 A, 30 분이 불순물제거의 최소조건이었다. U-233을 spike로 사용, 동위원소희석 질량분석법으로 일반 레늄필라멘트 중 불순물로 포함된 우라늄 양을 측정한 결과 degassing을 하지 않은 필라멘트에서는 0.31 ng-U이 측정되었고, degassing (5.5 A, 1 hr.)을 한 것은 약 3 pg-U 이 측정되었다. 즉, 일반필라멘트의 경우, degassing을 하더라도 1 ng-U 시료에 대하여 0.3% 오차를 근본적으로 갖는 것을 알 수 있었다. 따라서 환경급 극미량 우라늄시료 측정에는 고순도 필라멘트를 degassing하여 사용해야 함을 알 수 있었다. 우라늄 측정 시 필라멘트 전류를 5.5 A로 하였을 때보다 6.0 A로 했을 때 불순물 우라늄 량이 1.5 배 더 크게 나타났다. 따라서 필라멘트 전류를 5.5 A 이상 올리지 않는 것이 바탕값 영향이 작음을 알 수 있었다. 우라늄 표준물질(KRISS 표준물질/NIST U-005, 030)을 사용하여 우라늄 동위원소 함량을 측정한 후 인증 값과 비교한 결과 U-235 는 0.04%, U-234, U-236는 2% 이내에서 각각 일치하였다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제29권4호
• /
• pp.57-67
• /
• 2023

Purpose: Recently, the operating unit remodeling compititon has been increasing rapidly in Korea, but there are no design infomation for spatial planning of sterile supply storage. Therefore, the propose of this study is to present area composition of the operating unit after remodeling. Methods: For literature review, the 6 studies and guidelines of operating unit(guidelines in the U.S, Australia, UK and Korea and 2 studies in Korea) conducted surveys and analysis. Room and space composition and zone of operating unit are redefined for this study. For obtaining area, to conduct masuring and calcuating of document of operating unit before and after remodeling in 3 cases. There are some patterns of plan in operaing unit by sterile supply storage. This study derived data for attributes of area composition of sterile supply storage. Results: The results of this study are as follows: First, Reviewing previous studies and Guidelines, for this study the suggested model was 5 zones(Operating zone, Support zone, Patient zone, Staff zone, Circulation zone) and redefined each room and space. Second, For infection control, sterile supply storage was provided to directly accessible to the operating room. Third, According to ralation of operting room and sterile supply storage, there are two types : 'double loaded type' and 'single loded type'. Sterile supply storage shall increase area of ciculation zone. Implications: This study can be used as primary data on remodeling of operating unit. In addition, it suggests that for infect control sterile supply storage is functional area.

• 암석학회지
• /
• 제28권2호
• /
• pp.53-69
• /
• 2019

영남육괴 남서부인 지리산지구의 편마암복합체에 발달하는 연성전단변형의 기하학적 및 운동학적 특성과 연성전단변형을 받은 우백질편마암에 대해 SHRIMP 저어콘 U-Pb 연대측정을 수행하고 연성전단변형의 시기에 대하여 논의하였다. 편마암의 엽리를 연성변형에 의해 생성된 전단엽리들이 절단하고 있으며, 광역적인 분포를 나타내고 있어 이 지역의 편마암은 두 번 이상의 강력한 연성변형을 겪었음을 지시한다. 전단엽리면에 발달한 신장선구조는 북동 방향에 완만한 침강각을 보여 주향이동성 전단운동의 존재를 지시하며, 신장선구조를 포함하고 전단엽리면에 직교하는 단면에서는 우향의 전단감각이 우세하게 발달한다. 연성변형전단의 공간적 분포는 남북 내지 북북동 방향이 우세한 우향의 전단대가 중앙부 및 동부에서 대상 분포로 발달된 특성을 보이며, 서쪽부에서는 호남전단대의 일반적인 방향성인 북동 방향으로 발달하고 있다. 강한 전단변형을 받은 우백질편마암의 2개의 시료에서 구한 U-Pb 일치연령은 각각 $1,868{\pm}3.8Ma$와 $1,867{\pm}4.0Ma$로 연구지역 일원에서 보고된 편마암류들의 U-Pb 연대측정 결과와 일치한다. 연구지역에서 분포하는 전단변형을 받은 편마암류, 편마암류를 관입한 변형된 염기성 암맥과 화강암류 그리고 변형 특성이 관찰되지 않는 화성암류들의 관입 시기를 고려할 때, 연성전단 변형작용은 약 260 Ma-230 Ma 동안 섭입작용과 관련된 화강암질 화성활동 이후인 약 230~220 Ma에 한반도 충돌조산운동과 관련되어 발생하였다.

• 한국수산과학회지
• /
• 제28권2호
• /
• pp.174-182
• /
• 1995

Using the optical data from the EUMELI 3 and 4 missions, the optical properties are discussed in relation to primary production in the oligotrophic zone of the Eastern Atlantic Ocean. The depth of euphotic layer $(Z_{eu})$, the total accumulated concentration of pigment $(C_{TOT})$ and the concentration of pigment (C) are 88m, $12.4mgm^{-2}\;and\;0.14mgm^{-3}$, respectively for the EUMELI 3 mission and 101.7m, $10.0mgm^{-2}\;and\;0.10mgm^{-3}$, respectively for the EUMELI 4 mission. The concentration of pigment is higher in autumn (EUMELI 3) than in spring (EUMELI 4). This indicates that the concentration of photosynthetic pigment has a close correlation with vertical attenuation coefficient $(K(\lambda))$ that changes seasonally in the euphotic layer. While the spectral distributions of downward Irradiance$(E_d)$ for the wave length of 470nm increase with depth, those of upward irradiance $(E_u)$ for the wave length range between 410nm and 490nm are constant, because the study area is covered with the blue and clear oceanic deep waters. The vertical attenuation coefficients of downward irradiance $(K_d)$ and upward irradiance $(K_u)$ have low values between 0.02 and $0.06m^{-1}$ due to the low absorption and scattering by the photosynthetic pigment of phytoplankton. Therefore this zone has the characteristics of the case 1 waters with low concentrations of photosynthetic pigment, and can be classifed into IB.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.528-536
• /
• 2002

As one step for the safety performance of LNG storage tank, the change in fracture toughness within the X-grooved weld heat-affected zone (HAZ) of newly developed 9% Ni steel, which was submerged arc (SA)-welded, was investigated. Both crack initiation fracture toughness and crack arrest fracture toughness were evaluated by the crack tip opening displacement (CTOD) tests and compact crack arrest (CCA) tests. As the evaluated region approached the fusion line, each test result shorted different tendency, that is, crack initiation toughness decreased while crack arrest toughness increased. The results were discussed through the observation of the microstructural change.