• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.108-114
• /
• 2005

The generation of fine relics of suspensions is a significant interest as it holds the key to the fabrication of electronic devices. These processes offer opportunities for miniaturization of multilayer circuits, for production of functionally graded materials, ordered composites and far small complex-shaped components. Some novel printing methods of depositing ceramic and metal droplets were suggested in recent years. In an electro-hydrodynamic printing, the metallic capillary nozzle can be raised to several kilovolts with respect to the infinite ground plate or pin-type electrode positioned a few millimeters from the nozzle tip. Depending on the electrical and physical properties of the liquid, for a given geometry, it Is possible to generate droplets in any one of three modes, dripping, cone-jet and multi-jet. In this experiment, an alumina suspension flowing through a nozzle was subjected to electro-hydrodynamic printing using pin-type electrodes in the cone-jet mode at different applied voltages. The pin-type electrodes of 1, 100, 1000${\mu}m$ in diameter were used to form fine ceramic patterns onto the substrates. Various feature sizes with applied voltages and electrode diameters were measured. The feature sizes increased with the electrode diameter and applied voltages. The feature size was as fine as $30 {\mu}m$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.595-596
• /
• 2006

The flexible organic thin film transistor (OTFT) array to use as a switching device for an organic light emitting diode (OLED) was designed and fabricated in the microcontact printing and low-temperature processes. The gate, source, and drain electrode patterns of OTFT were fabricated by microcontact printing which is high-resolution lithography technology using polydimethylsiloxane(PDMS) stamp. The OTFT array with dielectric layer and organic active semiconductor layers formed at room temperature or at a temperature tower than $40^{\circ}C$. The microcontact printing process using SAM(self-assembled monolayer) and PDMS stamp made it possible to fabricate OTFT arrays with channel lengths down to even nano size, and reduced the procedure by 10 steps compared with photolithography. Since the process was done in low temperature, there was no pattern transformation and bending problem appeared. It was possible to increase close packing of molecules by SAM, to improve electric field mobility, to decrease contact resistance, and to reduce threshold voltage by using a big dielecric.

• 청정기술
• /
• 제26권2호
• /
• pp.109-115
• /
• 2020

최근 3년간 세계 식품 3D프린팅 시장은 연 평균 31.5%의 높은 성장률과 약 94억 6000만 달러에 이르는 산업규모를 보이고 있다. 식품 3D 프린팅 기술은 기존 식품을 자유롭게 디자인함으로써 개인의 취향과 목적에 따라 식품을 제작할 수 있어 다양한 범위로 활용이 가능하다는 장점을 지니고 있다. 세계 여러 국가에서는 식품 3D프린터를 제작하여 식품 3D 프린팅의 장점들을 활용한 음식과 같은 시제품들을 내놓고 있으며 전투식량, 우주식량, 음식점, 유동식, 노인식, 환자식, 유아식 등의 여러 분야에서까지 활용하고자 시도 중에 있다. 성장가능성이 높고 산업 규모가 지속적으로 확대될 전망인 3D 프린팅 시장은 블루오션이 될 가능성이 다분한 반면 우리나라는 식품 3D 프린팅 기술뿐만 아니라 전반적인 3D프린팅 활용률이나 산업 규모 자체가 작다. 이는 선진국에 비해 미흡한 제도화와 표준화된 국산 소재 개발이 지연 등의 문제가 존재하기 때문으로 따라서 본고에서는 식품 3D프린팅의 필요성에 대해 알리고 우리나라의 식품 3D 프린팅 시장 활성화라는 부가 효과를 얻고자 식품 3D프린팅 기술과 식품소재에 관해 기술하고자 한다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2006년도 추계학술발표대회 및 제11회 신소재 심포지엄
• /
• pp.27.2-27.2
• /
• 2006

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1992년도 제1차 학술발표초록집
• /
• pp.25-25
• /
• 1992

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.624-627
• /
• 2003

Microcontact printing (uCP) of alkanethiols on gold was the first representative of soft-lithography processes. This is an attempt to enhance the accuracy of classical to a precision comparable with optical lithography, creating a low-cost, large-area, and high-resolution patterning process. Microcontact printing relies on replication of a pattered PDMS stamp from a master to form an elastic stamp that can be inked with a SAM solution(monolayer -forming ink) using either immersion inking or contact inking. The inked PDMS stamp is then used to print a pattern that selectively protects the gold substrate during the subsequent etch.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 추계학술발표논문집
• /
• pp.109-115
• /
• 2007

Instead of existing bar code system, RFID is now the core sensor technique of Ubiquitous computing and it will bring a revolution of corporation's logistics systems. In recent years, RFID becomes the center of government and other related companies and furthermore, its basic and applied techniques and have been established as various international standards. Many major countries announced application cases in various fields and concentrate their effort to make new RFID technologies as well. Recently Korean government announced the basic plan of u-Korea and all-out plan of activation of RFID/USN. SO in this paper, we will discuss two things; the trends of RFID technologies and the printing tag technique, which is needed to spread of RFID item units.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.391-391
• /
• 2011

Crystalline silicon solar cell을 양산에 적용하기 위해 전면 전극의 패턴을 형성하는 방법으로 Ag paste를 이용한 screen printing이 가장 일반적으로 사용된다. 전면 전극의 패턴 형성 시, Finger의 width와 spacing은 Fill factor, JSC, VOC 등 태양전지의 중요 parameter들과 관련되어, 효율에 영향을 미치기 때문에, printing 시 Finger width와 spacing을 최적화하여 최대한의 효율을 내는 조건을 찾는 것이 바람직하다. 본 연구에서는 Finger width를 $30{\mu}m{\sim}100{\mu}m$, spacing을 $1.8{\mu}m{\sim}2.8{\mu}m$ 까지 가변하여 c-Si solar cell을 제작하였으며, 제작된 cell의 LIV를 측정을 통하여, 최적의 효율을 내는 조건을 찾고자 하였다. 그 결과 Finger width $30{\mu}m$, Finger spacing $1.8{\mu}m$의 조건에서 17.12%로 최고의 효율을 나타내었다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2006년도 춘계학술발표회 논문집
• /
• pp.180-181
• /
• 2006

The hydrolysis of some vinylsulfonyl (VS) typed reactive dyes were investigated at the pH, temperature and other experimental conditions. The hydrolytic behaviour, especially, stability in various pH value, of the water soluble reactive dyes are examined. In neutral and acid condition, mother dyes are a quite stable. Other hand, it was found that dimerization and decomposition for these dyes were estimated in an aqueous alkaline medium. These alkaline hydrolysis behaviour was monitored by the high performance liquid chromatography.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.15.1-15.1
• /
• 2009

Nano transfer printing and micro contact printing is well known printing method based on soft lithography which uses conformal soft elastomer with designed surface relief structures. Here I introduce another class of novel 3D nanofabrication technique by using the same elastomer but in a different manner. The approach, which we refer to as proximity field nanopatterning, uses the surface-reliefed elastomers as phase masks to pattern thick layers of transparent, photosensitive materials. Aspects of the optics, the materials, and the physical chemistry associated with this method are outlined. A range of 3D structures illustrate its capabilities, and several application examples demonstrate possible areas of use in technologies ranging from microfluidics to photonic materials to density gradient structures for chemical release and high-energy density science.