• 한국강구조학회 논문집
• /
• 제20권4호
• /
• pp.539-548
• /
• 2008

본 연구는 기존에 발표한 T형 모듈단면 프로파일보의 적용가능성을 확인하기 위해 실험체를 제작하고 전단보강 유무에 따른 휨 및 전단거동을 측정하여 그 결과를 소성이론식과 비교 분석하였다. 모듈단면 프로파일보는 프로파일이 거푸집기능에 추가하여 휨 및 전단저항성능에 기여하고 모듈개념을 통해 성형성능을 향상시킨다. 실험결과 전단보강을 실시한 TS계열 실험체가 전단보강이 없는 T계열 실험체에 비해 우수한 휨저항 능력을 나타내 사용된 전단보강재는 적절하게 전단력을 분담하고 있는 것으로 파악되었으나 T1-1실험체를 제외한 모든 실험체에서 볼트의 전단파괴에 의한 모듈간 슬립현상이 발생되어 휨저항 성능이 충분히 발휘되지 못한 것으로 판단된다. 추후 전단연결재를 변수로 한 T형 모듈단면 프로파일보에 관한 연구를 통해 적절한 모듈간 접합방법이 연구 되어져야 할 것으로 판단된다.

• Animal Systematics, Evolution and Diversity
• /
• 제36권2호
• /
• pp.167-174
• /
• 2020

A halacarid species of the genus Copidognathus is newly reported from Korea: C. daguilarensis Bartsch, 1997, which was described from Hong Kong. It is redescribed herein with detailed illustrations. Korean specimens coincide well with the original description, however, they showed two minor morphological discrepancies from it: quite shorter second palpal segment than the fourth and a modified dorsal seta on the second palpal segment. Korean specimens were rather smaller than the type specimens from Hong Kong, however, they did not show significant differences in the length to width ratios of important body parts. The number of perigenital setae was more variable in the Korean males, ranged 24-29 setae, versus 25-26 in Hong Kong's. Copidognathus daguilarensis is reported for the first time outside the type locality, and joins as the second member of the gibbus group in the northwest Pacific.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.551-554
• /
• 2002

As a general rule, the brazing process between cemented carbides and steel used by Silver (Ag) type brazing filler. The composition of Ag type filler were used Ag-Cu-Zn-Cd type filler mainly. But, the demand of Cadmium (Cd)-free in Ag type filler was raised recently. The reason why Cd-free in Ag brazing filler were occupied to vaporize as a CdO$_2$ when brazing process, because of Cd element was almost low boiling point of all Ag type filler elements. And, CdO$_2$ was a very harmful element for the human body. This experiment was developed Cd-freeing on Ag type filler that was used Indium (In) instead of Cd element. In this experiment, there were changed from 0 to 5% In addition in Ag brazing filler and investigated to most effective percentage of Indium. As a result, the change of In addition instead of Cd, there was a very useful element and obtained same property only 3% In added specimens compared to Cd 19% added specimens. These specimens were obtained same or more deflective strength. In this case, there were obtained 70 MPa over strength and wide brazing temperature range 650-800 C. A factor of deflective strength were influenced by composition and the shape of $\beta$ phase and between $\beta$ phase and cemented carbides interface. Indium element presented as $\alpha$ phase and non-effective factor directly, but it's occupied to solid solution hardening as a phase. $\beta$ phase were composed 84-94% Cu-Ni-Zn elements mainly. Especially, the presence of Ni element in interface was a very important factor. Influence of condensed Ni element in interface layer was increased the ductility and strength of brazing layer. Therefore, these 3% In added Ag type filler were caused to obtain a high brazing strength.

• 한국주조공학회지
• /
• 제34권5호
• /
• pp.170-178
• /
• 2014

Using the Gleeble test, the effects of [Mn/S] ratios and the presence of sulfides on the high-temperature fracture morphology of heavy-section steel castings were analysed via the observations of the microstructures. The specimens for which the [Mn/S] ratio was in the range of 60~80 showed a ductile fracture morphology with an area reduction of more than 60%, while some specimens with similar [Mn/S] ratios showed a brittle fracture morphology with an area reduction of 0.0% due to the liquidation of sulfides at the grain boundary. The fracture morphology was classified into three types in the Gleeble high-temperature tensile test specimens. The first type showed dimple formation at the grain boundary, the formation of globular MnS sulfides, and plastic deformation of sulfides at an elevated temperature, indicating a needle-point type of ductile fracture with area reductions of 96.0~97.8%. The second type was a knife-edge type brittle fracture with an area reduction of 0.0% due to the film-type liquidation of sulfides at the grain boundary, band-type liquidation, and the liquidation of a terraced nipple pattern. The third type was the typical ductile fracture with an area reduction of 31.3~81.0%, in accordance with the mixture of dimples with in the grains and terraced nipple pattern at the grain boundary.

• 대한의생명과학회지
• /
• 제9권4호
• /
• pp.183-187
• /
• 2003

Pseudomonas aerugionsa is a commonly isolated nosocomial pathogen. DNA fingerprinting of P. aerugionsa is examined by randomly amplified polymorphic DNA (RAPD). In this study, P. aeruginosa were isolated from environmental and clinical specimens and the molecular typing of the microorganisms was investigated by RAPD. Thirty strains of P. aeruginosa were selected from the strains isolated formerly and submitted for type identification to the University Hospital. 15 strains of P. aeruginosa were received from Chungnam University Hospital and 14 strains from Gyeongsang University Hospital. DNA of P. aeruginosa was extracted by Qiagen genomic DNA kit. PCR mixtures were set up and incubated, Reactions mixtures were made to be optimal for P. aeruginosa. RAPD typing analysis was carried out by the multivariate statistical program (MVSP) V3.0. RAPD type I was the most common pattern and included 23 strains. Most of strains from Gyeongsang University Hospital belonged to RAPD type lb and 15 strains from Chungnam University Hospital to RAPD type I or II. RAPD typing of P. aeruginosa isolated from the environmental and clinical specimens was very simple and reproducible.

• 대한의생명과학회지
• /
• 제10권4호
• /
• pp.507-514
• /
• 2004

The Pseudomonas aeruginosa isolated from the clinical specimens has a mutation on the QRDR (quinolone resistance determining region). There were obvious mutations in both gyrA and parC gene which are major targets of quinolone. Simultaneous mutations were found two sites or more on these genes in all of ten strains. GyrB or parE gene had only silent mutation without converted amino acids. We confirmed that P. aeruginosa from clinical specimens exhibited decreased sensitivity to fluroquiolone due to changed Thr-83→lle and Asp-87→Asn types on gyrA and altered Ser-87→Leu type on parC. This is the first finding that a new Met-93→Thr type on parC as well as mutations on gyrB or parE genes differed from existing patterns. This study showed more mutations of gyrA rather than parC, suggesting that change of Type Ⅳ topoisomerase is more serious than that of type Ⅱ (DNA gyrase).

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.95-99
• /
• 1996

The bending and compression strength properties of two types Rhus verniciflua specimens, which made of no heat-treated wood and heat-treated wood for urushiol extraction, were measured. The heat-treated specimens were finger-jointed with either resorcinol-phenol or polyurethane resin adhesives, and the vertical type bending strength property was also measured in these specimens. The results obtained are as follows ; 1. The correlation coefficient between the compression strength and specific gravity in the specimens of no heat-treated and heat-treated wood was high. However there was no difference in compression strength property as affected by heat treatment. 2 The correlation coefficient between the bending strength and specific gravity in the specimens of no heat-treated and heat-treated wood was also high. However, there was no difference in bending strength property as affected by heat treatment. 3 The bending test showed high correlation between modulus of elasticity and modulus of rupture for the specimens made of no heat-treated and heat-treated wood. However, there was no difference in bending strength property between the specimens made of heat-treated and no heat-treated wood. 4. The efficiencies of bending strength test on the finger-jointed specimens of heat-treated wood with resorcinol-phenol and polyurethane resin adhesives were 0.85, 0.81. respectively.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.38-51
• /
• 2000

The study on the mechanical behavior of a spot-welded specimen is largely divided into the quasi-static overload failure analysis and the fatigue failure prediction. The main issue in an overload analysis is to examine the critical loads, thereby providing a generalized overload failure criterion. As the welding spot forms a singular geometry of an external crack type, fatigue failure of spot-welded specimens can be evaluated by means of a fracture parameter. In this study, we first present the limit loads of 4 representative types of single spot-welded specimens in terms of the base metal yield strength and specimen geometries. Recasting the load vs. fatigue life relationships experimentally, obtained here, we then predict the fatigue life of spot-weld specimens with a single parameter denoted the equivalent stress intensity factor. This crack driving parameter is demonstrated to successfully describe the effects of specimen geometry and loading type in a comprehensive manner. The suggested fatigue life formula for a single spot weld can play a key, role in the design and assessment of spot-welded panel structures, in that the fatigue strength of multi-spots is eventually determined by the fatigue strength of each single spot.

• Nuclear Engineering and Technology
• /
• 제35권5호
• /
• pp.471-481
• /
• 2003

In order to evaluate the microstructural characteristics of irradiated fuel claddings (Zircaloy-4), two irradiated specimens having different burnups (18 GWD/MTU and 42 GWD/MTU) were prepared from the G23-M4 fuel rods, which were loaded in Kori Unit 1 for 4 fuel cycles. The oxide thickness, hydride morphology and hardness change were characterized by an optical microscope and a micro-hardness tester after preparing the irradiated specimens in the PIE (Post Irradiation Examination) facilities. The dislocation loops and the amorphous transformation of precipitates induced by the neutron irradiation in the nuclear plant were also examined by a TEM. As the burnup increased from 18 GWD/MTU to 42 GWD/MTU, the oxide thickness increased from $6.0{\mu}m\;to\;25.3{\mu}m$ and the contents of hydrogen pick-up in the Zr matrix also greatly increased. In the comparison of the hardness of the unirradiated fuel cladding, the amount of hardness increase was nearly $9.3\%\;and\;24.2\%$ for the irradiated samples of 18 and 42 GWD/MTU, respectively. Both -type dislocation loops and -type dislocation components were observed simultaneously in the irradiated specimens and the densities of the dislocation was increased by increasing the burnup. The precipitates in both the irradiated specimens were amorphously transformed by the neutron irradiation and the trend of the amorphous transformation of the precipitates was enhanced at a higher burnup.

• Steel and Composite Structures
• /
• 제15권6호
• /
• pp.605-621
• /
• 2013

CFRP strips are widely used nowadays for repair/strengthening or capacity increase purposes. Sharp bending at the ends of the CFRP strips is frequently encountered at these applications. In this study, Reinforced Concrete (RC) beam specimens that were produced with 10 MPa compression strength concrete were strengthened by using bonded CFRP strips with end anchorages to tension region. The parameters that were investigated in this study are the width of the strip, the number of applied fan anchorages and whether additional layer of CFRP patch is used or not at the strip ends. Specimens were strengthened with 100 mm wide CFRP strips with one or two anchorages at the ends. In addition CFRP patch with two and three anchorages at the ends were tested for investigating the effect of the patches. Specimens that were strengthened with three anchorages at the ends with patches were repeated with 60 and 80 mm wide CFRP strips. The most successful result was obtained from the specimen that was strengthened with 80 mm wide CFRP strips with 3 end anchorages and patches among the others at the experimental program. The numbers of anchorages that were applied to ends of CFRP strips were more effective than the width of the CFRP strips onto strength and stiffness of the specimens. Due to limited space at the ends of the strips at most three anchorages could be applied.