• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.226-232
• /
• 1998

In this pager, we present IGBT VVVF inverters as a 1C1M propulsion system for electric car. This inverters are composed of high power IGBT's and controlled by compact control units. The control unit performs full digital control by using 32bit DSP and microconteroller. By using CAN-bus, high speed network is constructed within tow control units. The stack is simplified and optimized by using plate bus and IGBT driver units of hybrid-type.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.12
• /
• pp.897-901
• /
• 2010

A silencer has been widely used for the purpose of suppressing the noises propagated from duct of air conditioning system. The absorption type silencer is usually applied to reduce the noise with high frequency bandwidth. On the order hand, the resonance type silencer is applied to reduce the noise with low-middle frequency bandwidth. The insertion loss of silencer is measured in the reverberation room. The cut-off frequency of reverberation room is 100 Hz. The insertion loss of absorption type silencer is more larger than that for resonance type silencer regardless of changing the flow velocity.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.939-950
• /
• 2011

In this study, the load test of rubber tire bogie for monorail type LRT. Bogie for rolling stock in safety operation of the vehicle as an essential core unit before applying to the vehicle safety and reliability should be tested sufficiently. Rubber tire monorail type bogie compared to the traditional bogie wheel lots of formats, the complexity of the load acting static load test, the bogie of the vehicle operation conditions by structural analysis by considering the loading conditions was evaluated by calculating. Test methods and evaluation criteria based on urban rail vehicle performance testing by applying the test were welded parts and materials for the results leading to material fatigue endurance test by applying the result of evaluating the structure has been identified as safe.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1309-1316
• /
• 2002

The purpose of this study is to analyze the effects of the parameters of the suspension system in railway rolling-stock for KT-23 type passenger vehicle. According to the results of simulation and the field test, Optimal condition was obtained for the stiffness ratio of the primary spring and the secondary of the suspension system. When the stiffness ratio was increased, the vibration was increased on the car body and decreased on the bogie, and ride quality are getting worse because of increase of the vertical natural frequency of the car body. The results of this study are usefull to improve the technology of the ride quality of KT-23 type vehicle.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1110-1115
• /
• 2002

The purpose of this study is to analyze the effects of the parameters of the suspension system in railway rolling-stock for KT-23 type passenger vehicle. According to the results of simulation and the small scale vehicle test. Optimal condition was obtained for the stiffness ratio of the primary spring and secondary spring of the suspension system. When the stiffness ratio was Increased, the vortical vibration was increased on the car body for empty and weight car. The result of this study are stable to use of the optimum parameter of the ride duality of KT-23 type vehicle. Also, it is usefull to development of full scale vehicle dynamomer

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.74-80
• /
• 2002

A propulsion system apparatus for railroad vehicle is estimated it's performance because of safety and confidence. In general, flywheel type testing method is widely used in the equipment. However, mechanical inertia generated by the flywheel can not be varied (or controlled) and can not be represent actual running resistance. In this study, we have focused on the development of variable vehicle load generation. Therefore, we have proposed the method which uses variable vehicle load controlled by vector motor to get the characteristics of the real vehicle load and confirmed the results with those of computer simulations.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3032-3036
• /
• 2011

Cooling type of traction motor for EMU in domestic is mostly an open type. Its system is a cooling air entered through air inlet cool down a traction motor and an hot air by traction motor get out air outlet. It is easy to cool it down but hard to maintain it. To improve an ability of maintenance, a total enclosed type traction motor is already developed and used in abroad, not an opne type. So we developed a total enclosed type traction motor which will be used in domestic and abroad EMU. We tried to reduce a weight and a size compared with the abroad one. In contrast with open type traction motors which cool off inside of motors, total enclosed motors cool down by cooling exterior frame of motors. In this case, cooling fins or air fan blowing to the exterior of motors are applied. The total enclosed type traction motor developed by us have two housing to block the foreign substance into inner of a motor and have two cooling fan to easy to reduce a heat happened at a coil. In this paper, design of a cooling structure of the total enclosed traction motor developed twice and performance verification through test will be discussed.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1370-1378
• /
• 2007

High speed railway bridge is affected on safety of bridge by dynamic amplification effect, when dynamic response of bridge is equal to effect cycle load for rolling stock axle according to high speed operation train. And excessive deformation of structure has negative effect on operation safety of train and comfort of passenger due to fluctuation of wheel load by torsion of track etc. and decrease of contact force on vehicle wheel-rail. To ensure the safety of track and train operation safety, it is have to perform the study on resonance and deformation of structure. That criteria and requirement of railway bridge is limitation of vertical acceleration on deck for dynamic behavior of structure, contact of vehicle wheel and rail, limitation of face distortion and rotation angle of end deck, and limitation of vertical displacement by train. Unlike KYEONGBU High Speed Railway, New constructed HONAM High Speed Railway have to applied the new requirement for dynamic behavior safety according to change of condition which is type of ballast (slab ballast), interval of track, and actual rolling stock load. Therefore, in this paper, it was conformed the dynamic characteristic due to parameter, which related with above mentioned criteria, for steel composite bridges.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05a
• /
• pp.74-77
• /
• 2000

The main objective of this paper is to design and test a new type of polymer ZnO surge arrester for AC power system of railroad vehicles. Metal oxide surge arrester for most electric power system applications, electric train and must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. When breakdown of ZnO elements in a surge arrester occurs due to flashover, fault short current flows through the arrester and internal pressure of the arrester rises. The pressure rise can usually be limited by fitting a pressure relief diaphragm and transferring the arc from the inside to the outside of the housing. However, there is possibility of porcelain fragmentation caused by the thermal shock. pressure rise, etc. Non-fragmenting of the housing is the most desired way to prevent damage to other equipment. The pressure change which is occurred by flashover become discharge energy. This discharge energy raises to damage arrester housing and arrester housing is dispersed as small fragment. Therefore, the pressure relief design is requested to obstruct housing dispersion. The main research works are focused on the structure design by finite element method, pressure relief of module, and studies of performance of surge arrester for electric railway vehicle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.699-709
• /
• 2014

This paper proposes a new method for predicting the derailment of a running train under cross-wind conditions, using the single wheelset derailment theory. The conventional theories used for predicting the derailment due to cross-winds were developed under the assumption that derailment will always be of the roll-over type, thus neglecting other possible types such as wheel-climbing, which may occur under special driving conditions. In addition, these theories do not consider running conditions such as dynamic wheel-rail interactions and friction effects. The new method considers the effects of dynamic wheel-rail interaction as well as those of lateral acceleration, rail cant, and cross-winds. The results of this method were compared and verified with those of the conventional methods and numerical simulations.