• Bulletin of the Korean Chemical Society
• /
• 제17권10호
• /
• pp.919-924
• /
• 1996

Crystal structure of two inclusion compounds Cd(pn)Ni(CN)4·0.25G (G=toluene and p-xylene, pn=1,2-diaminopropane) have been determined from single-crystal X-ray diffraction data; toluene clathrate: monoclinic P21/n, a=13.838(6), b=26.893(5), c= 7.543(5) Å, γ=90.92(3)°, Z=4, R=0.0616; p-xylene clathrate: monoclinic P21/n, a=13.895(2), b=26.900(3), c=7.613(1) Å, γ=91.06(1)°, Z=4, R=0.0486. The host structures determined for toluene- and pxylene-guest clathrates are substantially identical to the U-type structures observed for the straight chain aliphatic-guest clathrates. However, the alternating arrangement of occupied channels with the guest molecules and vacant channels appears in the host structure. The non-centrosymmetric toluene molecules are distributed about the inversion center to give an image like p-xylene molecule. The guests, toluene and p-xylene, prefer the U-type channel, favoring the interaction between the π-electrons of the aromatic ring and the pn-amino groups to hold the aromatic ring vertical to the cyanometallate meshes.

• 한국육종학회지
• /
• 제40권1호
• /
• pp.80-83
• /
• 2008

경남농업기술원 화훼육종연구소에서 '98년부터 교배조합육성을 위하여 국내의 재배농가와 종묘업체로부터 품종을 수집한 후, '01년 3월에 핑크색 대륜계의 'Grandeur'를 모본, 백색 소륜계의 'Nova Zembla'를 부본으로 인공교배를 실시하여 교배조합으로부터 284개의 종자를 획득하였다. 교배 후 결실이 된 조합은 채종 즉시 파종하였으며, 파종 1개월 후 248개의 유묘를 획득하였으며, 발아된 유묘는 본엽이 4~5매 전개되었을 때 화훼육종연구소 유리온실내의 선발 포장에 정식하였다. 그 후 교잡 1세대를 육묘하여 화색이 선명하고 수량이 많은 우수 2개체(01128-65, 94)를 1차로 선발하였다. 그 후 특성이 우수한 01128-94(경남 G-22)개체를 생장점배양에 의해 개체증식 후 화훼육종연구소 유리온실내의 특성검정 포장에 정식하여 2003년 6월부터 2004년 10월까지 3회에 걸쳐 생육 및 수량특성 검정을 실시하였다. 특성검정을 실시한 결과 화색, 화형, 수확량 등 품질과 수량이 우수하다고 판단되어 2005년 농작물 직무육성 신품종선정위원회의 심의를 거쳐 'Summer Ring'로 명명하였다. 'Summer Ring'은 화색이 선명한 핑크색의 반겹꽃 절화용으로 수량이 많고 안정된 소륜화로서 화색과 화심색이 잘 조화된 기호도가 높은 품종이다. 본당 수량은 연간 3회 검정 결과 평균 68.9개이며, 평균절화수명은 14.7일이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.130-132
• /
• 1997

In this paper, we propose a new type of tubular linear induction motor(TLIM) with two-dimensional motion. The proposed motor consists of four short primary LIMs arranged on a same circumference and a common secondary. By adopting independently energized ring-windings to the primary, we can expect the reduction of coil-end region and the freedom of alternating current supply. The secondary conductor is capable of producing anyone of rotary, linear, and helical motions by controlling the phase of supply currents in each primary winding. From the 3-D finite element analysis and the experiment, we derive the feeding conditions to increase the subsidiary rotary-force and an optimal arrangement of primary currents to reduce the number of slot.

• 약학회지
• /
• 제32권2호
• /
• pp.125-128
• /
• 1988

Geranylation of some synthetic and natural flavones have yielded cytotoxic products against L1210 coll; 5,2´-dihydroxy-6,7,8-trimethoxy-6´-geranyloxyflavone 4$(8.5{\mu}g/ml)$, 5,6-dihydroxy-7-gerenyloxyflavone 9$(2.3{\mu}g/ml)$. 2 has showed the same range of cytotoxicity as the starting material, 5,2´-dihydroxy-6,7,8-trimethoxy-6´-benzyloxyflavone$(17.0{\mu}g/ml)$. The cytotoxicity of 4 was lower than its starting substance, 5,2´,6´-trihydroxy-6,7,8-trimethoxyflavone $(4.5{\mu}g/ml)$. On geranylating 5,6,7-trihydroxyflavone(baicalein, $15.0{\mu}g/ml$) the cytotoxic activity has been strongly potentiated($2.3{\mu}g/ml$ of 9). The presence of at least a free hydroxy group in B-ring of Skullkapflavone II-type flavones. was essential for a high activity. A larger RD-group than methoxy in the B-ring has weakened the activity. The cytotoxicities of baicalein series could not be correlated to their structures.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.195-198
• /
• 2002

Poly(crown ether)s as a functional polymer materials have powerful and selective complexation properties with a large number of metal cations and have advantage of facility of their recovery and modification of their complexation properties in contrast to their monomeric analogues. Poly(crown ether)s having pendant macrocyclic groups can easily form 2:1-type crown ether ring-to-cation complexes with particular metal ions which are a little larger than the cavity of the crown ether ring. (omitted)

• Transactions on Electrical and Electronic Materials
• /
• 제17권4호
• /
• pp.222-226
• /
• 2016

This paper investigated the trench process, unified field limit ring, and other products for the development of a 500 V-level unified trench gate power MOSFET. The optimal base chemistry for the device was found to be SF₆. In SEM analysis, the step process of the trench gate and field limit ring showed outstanding process results. After finalizing device design, its electrical characteristics were compared and contrasted with those of a planar device. It was shown that, although both devices maintained a breakdown voltage of 500 V, the Vth and on-state voltage drop characteristics were better than those of the planar type.

• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.1993-1995
• /
• 2007

A substitution effect on the electronic transition of bi-substituted benzyl-type radicals was discovered. The origin of the electronic D1 → D0 transition of benzyl-type radicals was red-shifted upon substitution to the benzene ring. For symmetric bi-substituted benzyl-type radicals, it was found that the predicted shift obtained from mono-substituted benzyl-type radicals agreed well with the observation. The reason for this agreement is believed that the substituent contributes independently to the electronic energy. The substitution effect was applied to the symmetric bi-substituted difluoro-, dichloro- and dimethylbenzyl radicals.

• 한국광학회지
• /
• 제25권2호
• /
• pp.78-84
• /
• 2014

본 논문에서는 직경이 14.5 mm인 대면적 COB-type LED 패키지를 사용하면서도 15도 이내의 좁은 광속각을 구현하기 위해, 광학계 크기를 축소하고 동시에 satellite ring 발생을 억제할 수 있는 이중 반사경 구조를 고안하여 조명광학계용 2차 광학계를 최적 설계하였다. 최적 설계를 위해 광원 크기와 제 1 반사경의 광속각 관계를 이용하였고, satellite ring 발생을 억제하기 위한 제 2 반사경의 최적 위치 및 크기를 고려하였다. 그 결과 대체 상용 제품의 크기 제한을 만족하며 80%의 광속 효율을 달성할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.827-835
• /
• 1998

The effects of recirculated exhaust gas on the wear of cylinder liner piston and piston rings have been investigated by the experiment with a two-cylinder four cycle indirect injection diesel engine operating at 75% load and 1600 rpm speed For the purpose of comparison between the rates of two cylinders with and without EGR the recirculated exhaust gas is sucked into one of two cylinders after the soot among exhaust emissions is removed by an intntionally designed cylinder-type scrubber equipped with 6 water injectors(A water injector has 144 nozzles of 1.0 mm diame-ter) while only the fresh air into another cylinder. These experiments are carried out on the fuel injection at a fixed $15.3^{\circ}$ BTDC timing. It is found that firstly the mean wear amount of cylinder liner with EGR is more increased in the measurement positions of the second half than of the first half and the mean wear amount without EGR is almost uniform regardless of measurement posi-tions secondly the wear rates of the first and second piston ring(compression ring)thickness with EGR are more than twice but the wear rate of oil ring thickness without EGR is more increased than that with EGR and finally the wear rate of piston skirt with EGR is a little bit increased but the piston hed diameter is rather increased owing to soot adhesion and corrosion wear and espe-cially larger with EGR.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.34-41
• /
• 2018

A flange joint is a pipe connection used to prevent the leakage of high-pressure fluids by inserting a gasket and tightening the bolts. Among several kinds of gaskets available, metal ring type joint gaskets are most widely used in conditions that require high-temperature and high-pressure fluid flow, such as oil pipelines, gas pipes, pumps, valve joints, etc. The purpose of this study is to investigate the contact pressure and stress characteristics closely related to the sealing performance of Class 900 flange joints used in high temperature and high pressure environments. The dimensions of flange joints with five different nominal pipe sizes were determined with reference to those specified in ASME 16.5. The metal ring gaskets inserted in the joints were octagonal and oval gaskets. The bolt tensile forces calculated from the tightening torques were input as the bolt pretension loads in order to determine the contact pressure and stress levels after fastening. Loading was composed of three steps, including the fastening step, and different amounts of applied pressures were used in each analysis to investigate the effect of fluid pressure on the contact force of the joints. A general-purpose software, ANSYS 17.2, was used for the analysis.