• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.943-949
• /
• 2000

In this paper, the single and double heterostructure organic light-emitting devices(OLEDs) were fabricated. The single heterostructure OLED(TYPE 1) is consisted of TPD as a HTL(hole transfer layer) and Alq$_3$as an EML(emitting layer). The double heterostructure OLED(TYPE 2) is consisted of TPD as a HTL, Alq$_3$as an EML and PBD as an ETL(electron transfer layer). The another double heterostructure OLED(TYPE 3) is consisted of TPD as a HTL, PBD as an EML and Alq$_3$as an ETL. We obtained a strong green emission device with maximum EL emission wavelength 500nm in TYPE 3. When the applied voltage was 12V, the emission luminescence was 120.9cd/㎡. The chromaticity index of TYPE 3 was x=0.29, y=0.50. In the characteristic plot of current-voltage, TYPE 3 device was turned on at 6.9V. This voltage was a fairly low turn-on voltage. TYPE 1 and 2 device were turned on at 10V and 8.9V respectively. These types showed no good properties over that of TYPE 3.

• 한방안이비인후피부과학회지
• /
• 제21권3호
• /
• pp.200-206
• /
• 2008

Objectives : This study was planned to find the character type of enneagram in patients with Bell's palsy. Methods : Author gave the 26 patients with Bell's palsy the Korean Enneagram Personality Type Indicator(KEPTI). After making out the questionnaire, we got back them. Then author graded questionnaire papers, and classified according to characte type. We finded that type 1 and type 9 show a higher ratio than any other charicter type. Results : The cause of Bell's palsy onset were over work 34.5%, stress 23.1%, over work and stress 19.2%, cold exposure 7.7%, dental treatment 3.8% pregnancy 3.8%, unknown 7.7%. We finded that type 1 and type 9 show higher ratio than any other charicter type. Conclusion : To find the interrelation between the character type of enneagram and Bell's palsy, further reseach is needed continuosly.

• 대한수학회보
• /
• 제39권3호
• /
• pp.431-440
• /
• 2002

Recently P. Ozsv$\'{a}$th Z. Szab$\'{o}$ proved higher type adjunction inequalities for embedded surfaces in 4-manifolds of non-simple type. The aim of this short paper is to give a simple and direct proof of such higher type adjunction inequalities for smoothly embedded surfaces with negative self-intersection number in smooth 4-manifolds of non-simple type. This will be achieved through a relation between the Seiberg-Witten invariants used to get adjunction inequalities of 4-manifolds of simple type and a blow-up formula.

• Journal of Preventive Medicine and Public Health
• /
• 제15권1호
• /
• pp.115-123
• /
• 1982

The systematic school dental health programmes have been recognized as one of the most effective national dental health measures. This study was conducted to estimate the number of dentists required for the systematic school dental programmes in Korea applying the methodology recommended by WHO. Information necessary for the study was obtained by a mass oral examination to the 1241 primary and middle school students in Kang Wha area. First and 6th grade students from primary school and 3rd year students from middle school were specifically selected for the examination. The results are summarized below: 1) For the Type I program recommended by WHO, 1.8 dentists per 10,000 primary school children were estimated to be necessary. For the Type II program 2.5 dentists, Type III program 2.0 dentists, Type IV program 3.6 dentists per 10,000 primary school children were estimated to be necessary. In order to extend the systematic school dental programmes to the middle students, 2.0 dentists for the Type I program and 2.4 dentists for the Type II program 2.2 dentists for the Type III program, 3.6 dentists for the Type IV program per 10,000 students were estimated to be necessary. 2) If we assume that prophylaxis are done by hygienist, for the Type I program 1.3 dentists and 0.5 hygienist, for the Type II program 1.8 dentists and 0.7 hygienist, for the Type III program 1.3 dentists and 0.7 hygienist, for the Type III program 2.2 dentists and 1.4 hygienists per 10,000 primary school students were estimated to be necessary. In order to extend this program to the middle school, 1.4 dentists and 0.6 hygienist for the Type I program, 1.6 dentists and 0.8 hygienist for the Type II program, 1.4 dentists and 0.8 hygienist for the Type III program, 2.2 dentists and 1.4 hygienist for the Type IV program per 10.000 students were estimated to be necessary.

• 대한간호학회지
• /
• 제23권4호
• /
• pp.544-554
• /
• 1993

The study was designed to identify the attitude of nursing students to clinical education through Q-methodology. A C sample was developed through a review of the literature and interviews. Twenty - seven statements made up the finalized Q- sample. This was out of an initial 143 statements developed through consultation with eight professors. The P sample consisted of 25 nursing students in S Health Junior College.0 statements were written on seperate cards and were given to the 25 subjects to sort according to degree of agreement or disagreement. The Q-sorts by each subject were coded and analyzed with QUANL PC Program. The analysis discovered three major attitudes, namely “amicable adaptation” 〈type 1), “Nightingale social service” (type 2), and “realistic occupation pursuit” (type 3). The correlation was .465 between type 1 and type 2, .293 between type 1 and type 3, and .273 between type 2 and type 3. The characteristics of each type were as follows ; Type 1 (amicable adaptation) They satisfied in interpersonal relationships in the clinical setting. They would not dream of becoming Nightingale, but thought of nursing care affirmatively and performed their works faithfully and adapted themselves to the new circumstances easily, Fourteen subjects were classified as type 1. Type 2 (Nightingale: social service) They often dreamed as a child that they would be Nightingale with a white uniform and think that nursing is a gift from heaven. They have an aptitude for nursing care by nature and selected nursing science them-selves. They give care to the sick with pleasure. Seven subjects were classified as type 2. Type 3 (realistic occupation pursuit) They were not satisfied with their nursing practice. First of all they want a stable job, therefore they selected nursing science. They had conflicts in clinical practice, but were responsible for nursing and studied hard. Four subjects were classified as type 3. Through the results of this study, the attitude of nursing students to clinical education could be classified into three types. Therefore it is suggested that clinical education would be more valuable, if it was planned according to an understanding of the attitudes of nursing students to clinical education.

• 한국식품영양과학회지
• /
• 제24권5호
• /
• pp.684-689
• /
• 1995

The molecular structure of rice starch was investigated using Korean rice[3 varieties of Japonica type and 3 varieties of Tongi type(Japonica-Indica breeding type)]. The λmax of iodine complex and inherent viscosity of Japonica type were higher than those of Tongil type. $\beta$-Amylolysis limit of the starches was not different between the two rice types. In the distribution of molecular weight of rice starch, the molecular size of amylose and amylopectin for Japonica type were smaller than those for Tongil type. The chain of rice starch distributed F1 of above DP 55, F2 of DP 40~50 and F3 of DP 15~20, and the ratio of F3 against F2 for Japonica type was higher than that of Tongil type. The results suggest that rice of Japonica and Tongil type was different molecular structure of starch.

• 한국의류학회지
• /
• 제24권3호
• /
• pp.345-352
• /
• 2000

The purpose of this study was to classify lower body types of elementary school girls. The subjects for anthropometric study were 368 girls aged from 10 to 11. Factor analysis, cluster analysis, discriminant analysis, and analysis of variance were performed for statistical analysis of the data. Four lower body construction factors were extracted by the factor analysis of antropometric measurements. The factors extracted were lower body fatness factor, lower body height factor, lower body length from the waist to the crotch factor, and lower body configuration factor. On the basis of the cluster analysis, three different lower body types were categorized. Type 1 was short and small sized type and 42.4% of subjects belonged under this type. Type 2 was tall and fat type and 22.3% of subjects belonged under this type. Type 3 was the most similar to the average type having the largest waist-hip drop value and 35.3% of subjects belonged under this type. Discriminant analysis showed 7 discriminant factors that can classify the children's lower body type were Rohrer's index, height, fibulae length, waist girth, ilio cristale girth, trochanter girth, and weight.

• 교육시설 논문지
• /
• 제23권4호
• /
• pp.3-10
• /
• 2016

This paper presents the investigation results on the classification of the university campuses. For the classification, we selected the spatial index as the evaluation indicator since the environmental factors and maintenance methods vary from university campus to university campus. For the study, we used eight spatial indices of the 30 national universities. This paper provides the spatial characteristics of different campus types, presents campus classification analysis as a future research approach to campus maintenance, and provides the data for the future study of comparison among universities. The results are as follows. 1) The classification investigation categorized the university campuses into three groups. Type 1 is a large-scale type, located near downtown. Type 2 is a medium-scale type, located at a remote site from downtown. Type 3 is a small-scale type, which is located comparatively near downtown. 2) Type 1 is a large-scale mixed area type, and 13 universities belong to this group. Type 2 is a medium-scale suburban area type, and six universities are in this group. Finally, Type 3 is a small-scale downtown area type, and 11 universities belong to this group.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.1002-1012
• /
• 2001

The work reported here is an extensive study of tendon response to multiple cyclic tests including 3% constant peak strain level test (A-type test), 3% constant peak strain level test with two rest periods (B-type test), and 3∼4% different peak strain level test (C-type test). A sufficient number of specimens were tested at each type of the test to statistically evaluate many changes in response during testing and differences in response between each type of the test. In cyclic tests, there were decreses (relaxations) in the peak stresses and hysteresis, increases in the slack strains, and during lower peak strain level (3%) cyclic block after higher peak strain level (4%) cyclic block in the C-type tests. Considering the results of this study and those of the other study of multiple cyclic tests with rest periods by Hubbard and Chun, 1985, recovery phenomena during the rest periods occurred predominantly at the beginning of the rest periods. Consistently in both studies, the effects of rest periods were small and transient compared to the effects of the cyclic extensions. The recovery with cycles at lower peak strain level (3%) after higher peak strain level (4%) in the C-type test has not been previously documented. This recovery seems to be a natural phenomena in tissue behavior so that collagenous structures recover during periods of decreased demand.

• 대한치과보철학회지
• /
• 제43권5호
• /
• pp.650-661
• /
• 2005

Statement of problem: It could be hypothesised that attachments, which provide more retention against vortical and horizontal dislodgement, will be associated with more favorable parameters of oral function. Purpose: This study was to provide data of initial retentive force and retention loss of different bar attachment systems recommended for use with maxillary implant overdentures. Material and method: 4 implants were placed in the anterior region of edentulous maxilla, five different systems of bar attachment were fabricated as follows: cantilevered Hader bar using clips (Type 1), Hader bar using clips without cantilever (Type 2), Hader bar using clip and ERA attachment orange male (Type 3), Hader bar using clip and ERA attachment white male (Type 4), and Bar using magnets (Type 5). Each samples were placed in the universal testing machine for determination of retentive forces(at initial and after every 200 cycles up to 1,000 cycles). Results and Conclusion 1. Attachment type 1 showed the biggest initial retentive force followed by type 3, type 2, type 4, and lastly type 5(P<0.001). 2. After 1,000 cycles of repeated removals of attachments, significant loss of retentive forces was taken place except for attachment type 5. 3. After 1,000 cycles of repeated removals, the loss of retentive force between type 1 and type 2, which used Hader bar and clip attachments. was greater in type 1 that had wider clip formation. And between type 3 and type 4, which used ERA attachments, the loss of retentive force was greater in type 4 that had white male attached (P<0.001). 4. After 1.000 cycles of repeated removals, attachment type 3 showed the biggest retentive force followed by type 2, type 4, type 1 and lastly type. 5. There was no significant difference between attachment type 3 and 4, and type 4 and 1(P<0.001).