• 자원리싸이클링
• /
• 제9권1호
• /
• pp.44-51
• /
• 2000

보오크사이트를 원료로 하여 $Al(OH)_{3}/Al_2O_3$ 를 생산하는 공정에서 발생되는 부산물인 적니를 물리.화학적으로 처리하여 중금속 이온 제거용 흡착제로 재활용하고자 하였으며, 산업적으로 적용이 쉽도록 입자형 적니흡착제를 제조하였다. 이를 위하여 적니를 주성부능로 하고 몇 가지 첨가물의 함량과 소결온도를 변화시키며 실험하여 입자형 적니흡착제를 제조하였다. 실험결과, 적니 96.0wt%에 polypropylene 2.5wt%, sodium metasilicate 10wt%, fly ash 0.5 wt%를 첨가하여 $1200^{\circ}C$ 에서 30분간 소결시켜 제조하였을 때 납 이온에 대해 가장 높은 흡착제거율을 나타내었다. 그리고 입자형 적니흡착제의 제조방법에 따라 분쇄형 적나흡착제와 비드형 적니흡착제로 구분하여 이들의 중금속 흡탈착성능을 실험하였다. 그 결과 분쇄형 적니흡착제는 비드형 적니흡착제보다 흡착제거율과 탈착율이 모두 우수하였으며 분발형 적니흡착제와 마찬가지로 $Pb^{2+}$ 이온의 흡착제거율이 우수함을 알 수 있었다.

• 한국산림과학회지
• /
• 제104권3호
• /
• pp.368-374
• /
• 2015

본 연구는 지리산 일대 천연림에서 점표본법인 사분법에 의해서 수집한 식생자료를 바탕으로 cluster 분석법을 이용하여 산림형을 분류하였다. 연구 대상림은 신갈나무림형, 들메나무-거제수나무림형, 중생혼합림형, 구상나무림형, 서어나무림형, 졸참나무림형, 소나무림형, 굴참나무림형 등 8개의 산림형으로 분류되었다. 분류된 8개의 산림형들의 천이 진행 정도를 비교 평가하기 위하여 각 산림형별로 천이지수를 산출하였다. 연구 결과, 서어나무림형의 천이지수가 219.7로 산출되어 가장 높았고, 미미한 차이의 천이지수 218.3이 산출된 중생혼합림이 그 뒤를 이었으며, 소나무림형의 천이지수가 가장 낮았다. 산림형들의 천이지수와 종다양성지수와의 비례적인 관계는 찾기 어려웠다. 가정적으로, 천이지수가 높은 산림형은 극상림에 보다 가까이 근접한 것으로 사료된다. 그러나 추정된 천이지수는 천이 단계를 가늠하는 절대적인 기준으로 삼을 수는 없지만, 산림형들 간에 천이 계열 상의 위치를 비교 평가할 수 있는 참고자료의 역할을 할 수 있을 것으로 사료된다.

• 한국생활과학회지
• /
• 제18권6호
• /
• pp.1303-1314
• /
• 2009

The purpose of this study lies in examining the characteristics of differentiated body types for plus-size women and obtaining basic data for the wide-ranging choices of ready-made clothing in a consumer's place. The results of this study displayed no significant differences for subjects in their 30s and 40s in comparison to standards by ages but showed a significant difference with subjects in their 50s when compared with the data from Size Korea (2004). Research data in the height and length categories were lower, and the majority of data from the other categories were higher. In order to analyze the characteristics of a plus-size woman's body, 4 factors were differentiated into 3 types with 17 categories: Factor 1 was the element of the thickness of the trunk, factor 2 was the element of the thickness of the lower body and legs, factor 3 was the element of shoulder size and factor 4 was the element of the upper body length. The accumulation rate was shown to be 74.47%. The characteristics for each type were as follows: Type 1 is a body type with a relatively thin waist, small width and girth of upper body and curvy lower body, type 2 is the average body type, and type 3 is a body type with big breasts and abdominal obesity. The standard body type belonged to type 2. According to the correspondency test between age and type, the characteristics of type 1 corresponded relatively close to the measures of subjects in their 40s and relatively far from subjects in their 30s to 50s while type 2 and type 3 appeared to be similar to subjects in their 50s.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권1호
• /
• pp.53-57
• /
• 2012

Purpose: This study considered the effects and proper treatments of mandibular condyle fractures by comparing clinical differences and complications according to analysis and treatment plan. Methods: From September 2007 to August 2010, patients who were diagnosed with condylar fracture and monitored for more than 3 months were selected. Cases were divided in a reductive manner and evaluated by type and period of intermaxillary fixation (IMF), status of occlusion and trismus according to the Spiessle/Schroll method. A total 50 patients were examined. Results: The number of the unilateral condyle fractures was 45 and 30 patients had multiple fractures. Type of fracture was categorized by the Spiessle/Schroll method. There were 21 patients with type I, 11 patients with type II, 3 patients with type 3, 10 patients with type V and 5 patients with type VI; there were no patients with a type IV fracture. 11 patients were operated on with open reduction. Among them, 9 patients were type II and 2 patients were type I. For type I patients, an intra-oral approach was conducted with an endoscope and trocar. For 3 of the type II patients, an retromandibular approach was conducted and for the rest of the type II patients, the same approach as type I was used. The periods of IMF were 2.36 weeks (mean) in open reduction group and 2.9 weeks (mean) in closed reduction group and the total mean period is 2.78 weeks. All patients had stable occlusion after removing the IMF. Trismus occurred in 1 patient for open reduction and 5 patients for closed reduction. Facial nerve palsy was observed in one patient postoperatively that resolved after 6 months. Conclusion: In this study, similar prognosis was shown after an open and closed reduction was conducted. Therefore, treatments need to be planned depending on the degree of condyle fracture and the amount of displacement. Additionally, the period of IMF could be shortened with open reduction.

• 보건의료산업학회지
• /
• 제8권2호
• /
• pp.127-137
• /
• 2014

The purpose of this study is to investigate the relationship between behavior patterns(DISC) and direct indirect of social support from dental hygienists. The data used in this study were obtained from 171 dental hygienists who have been working on dental hospital or clinic in Pusan and Gyeongsangnam-do from 1st July to 30th August in 2011. In the level of direct indirect of social support according to subjects' general characteristics, higher educational level and non-religion was related with higher in direct of social support(p<0.05), and hygienists who worked in general hospital was related with higher indirect of social support(p<0.01). According to between behavior patterns(DISC) and indirect social support, these score were that I-type 3.55, D-type 3.53, C-type 3.41, and S-type 3.36. All behavior patterns(DISC) were similar with the indirect support. In direct support these score were that S-type 2.98 I-type 2.95, D-type and C-type 2.91. In frequency of behavior patterns(DISC), these were that I-type 56.7%, S-type 16.4%, C-type 14%, and D-type 12.9%. In correlation between factors, direction social support was correlated with I-type(p<.01) and C-type(p<.01) of behavior patterns(DISC). On based on these results, if the change of working environment, working condition will improve social support of dental hygienists. And education program have to developed for dental hygienists.

• 한국실내디자인학회논문집
• /
• 제16권4호
• /
• pp.39-46
• /
• 2007

The aim of this study was to recognize the need of three generation family house that is traditional house type of Korea. First, the pre-research analysis method was used for this study. And then, there are three type's grouping like those are as follows; 1) Recognition of three generation family house. 2) Type of three generation family house. 3) Plans of three generation family house. The analysis results are as follows; If the conditions are better than now, recognition is positive. Type are living together and next doors type can direct access. Some standart plan is been about room's number, house's area, bath's number and so on. Second, try to compare plan - this plan already has been used building - with standard plan. The compare result are as follows; three generation family houses - be used by whom - do not apply to standard plan. Almost houses have a three room that is less than the standard plan. All houses have a number of two bath that is less than the standard plan too. Condition of consideration is suitable to ages in next door type, but in case of living together type that consider user whom is use the inner room. Separation of entrance distinguish between the living together type and the next doors type. In case of living together type Dining with Kitchen room's number is one, but the next doors type have the number of two.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.225-229
• /
• 2014

A reflection-type three-dimensional (3D) screen using retroreflector is proposed to improve the visibility of a projected 3D image while keeping its perspective. For the projection-type 2D display, the diffuser is used to represent the 2D scene, overcoming the limitation of the aperture of the projection lens set. If the diffuser is adopted for the projected 3D image, only 2D images sectioned and blurred should be displayed on the screen. The proposed screen can make the 3D image with the aperture limitation visible to be applied to the 3D image projection systems. The feasibility of the proposed screen is verified by experiments.

• Pediatric Infection and Vaccine
• /
• 제5권1호
• /
• pp.104-114
• /
• 1998

목 적 : 장바이러스는 무균성 뇌막염의 가장 흔한 원인으로 알려져 있으며 1993년과 1996년에 국내에서 유행하였던 무균성 뇌막염은 주로 echovirus type 9에 의한 것이었다. 무균성 뇌막염의 유행시 원인 바이러스를 밝혀내는 일은 진단뿐 아니라 역학적인 의미에서도 필요하다. 이에 저자들은 1997년도에 마산 지역을 포함하는 경상남도 중부지역에서 유행하였던 무균성 뇌막염 환자를 대상으로 원인 바이러스를 규명하고 임상증상과의 관계를 추구하고자 본 연구를 시행하였다. 방 법 : 1997년 3월부터 10월까지 마산 파티마병원에 무균성 뇌막염으로 진단된 환자 239명(소아 213명, 성인 26명)에서 채취한 검체(뇌척수액 128례, 대변 239례)를 대상으로 바이러스 배양과 enterovirus RNA 검출을 시행하였다. 배양된 바이러스는 면역형광법을 이용하여 동정하였고 장바이러스 RNA는 reverse transcription-polymerase chain reaction(RT-PCR)을 이용하여 확인하였다. 결 과 : 1) 환자의 발생시기는 3월부터 10월까지였으며 6월에 가장 많은 환자의 분포를 보였다. 2) 대상 환자 239명(소아과 213명, 내과 26명)의 연령별 분포를 보면 소아환자의 평균연령은 4.9세로 신생아에서부터 15세에 이르기까지 다양하게 분포하였고 16세이상 내과 병동에 입원하였던 환자는 평균 연령이 24.2세로 16세에서 35세까지의 연령 분포를 보였다. 3) 환자에서 바이러스 분리는 뇌척수액 128례중 53례(41.4%), 대변에서는 239례중 163례(68.2%)에서 분리가 되었다. 4) 분리된 바이러스의 결과를 보면 뇌척수액에서는 echovirus type30이 16례(30.2%), echovirus type 6이 6례(11.3%), echovirus type 4가 1례, 아형이 결정되지 않은 echovirus가 4례, coxsackievirus type B5가 1례, 아형이 결정되지 않은 enterovirus가 24례 이었다. 한편 대변에서는 echovirus type30이 72례(44.2%), echovirus type 6이 21례(12.9%), echovirus type 4가 1례, 아형이 결정되지 않은 echovirus가 17례(10.4%), coxsackievirus type B5가 1례, A24가 2례, 아형이 결정되지 않은 coxsackievirus type B가 3례, 아형이 결정되지 않은 enterovirus가 46례였다. 결 론 : 1997년 3월부터 10월까지 경상남도 중부지방에서 무균성 뇌막염의 유행이 있었으며 원인 바이러스는 echovirus type 30이 주된 원인 바이러스이었고 그 외에 echovirus type 4, 6, coxsackievirus B5, coxsackievirus A24에 의한 무균성 뇌막염의 산발적인 발생이 있었다.

• 한국자기학회지
• /
• 제19권5호
• /
• pp.161-164
• /
• 2009

주기적 결함이 철 단층의 자성에 미치는 영향을 탐구하기 위해 전전자 총퍼텐셜 보강평면파 에너지 띠 방법을 이용하여 전자구조를 계산하였다. 결함은 원자 한 개가 빈 점결함, 각기 3개, 5개, 7개의 원자자리가 비어 있는 I 자형, + 모양, H 자 모양을 고려하였다. 빈자리에 가까이 있는 철 원자의 자기모멘트가 가장 컸으며, 결함의 원자수가 증가할수록 그 값도 증가하여, 점결함의 경우 3.08 보어마그네톤이었으며, I 자형, + 모양 및 H자 모양의 경우 각기 3.09, 3.15, 3.30 보어마그네톤이었다.

• Journal of Biosystems Engineering
• /
• 제19권4호
• /
• pp.343-357
• /
• 1994

Current commercial dairy feed has various problems in low feed productivity, inadequate formulation and higher feeding cost due to excessive capital investment and non-specialized system for the end product. To solve those problems, 6 TMR terminal models were developed in this study. The developed TMR terminal system consists of TMR terminal, TMR main center and combined system linked TMR terminal and TMR main center. 15 TMR main center models were developed to support 10, 20, 30, 40, 50 TMR terminal(30 ton/day basis) by 3 different types, and evaluated for capital investment and operation cost by the analysis of the newly developed computer program. Optimum model size is analyzed and suggested for each model. Followings are summary of this study : 1. The capital investment costs of TMR main centers were 1,600 to 3,800 million won for type 1, 2,200 to 4,500 million won for type 2 and 2,200 to 4,800 million won for type 3. Also model MACE30 or bigger were justified as the economical models. 2. The feed production costs of TMR main center models were 3,166 to 4,824 won/ton for type 1, 3,816 to 6,182 won/ton for type 2 and 3,990 to 6,263 won/ton for type 3. So feed production cost range was 3,166 to 6,263 won/ton. 3. The bigger production capacity, the less TMR main center production cost. The feed production cost of the biggest model MACE50 was 62~65% of smallest model MACE10.