• 제목/요약/키워드: two-temperatures

검색결과 2,457건 처리시간 0.03초

Ecosysteme de I′Etang de Berre (Mediterranee nord-occidentale) : Caracteres Generales Physiques, Chimiques et Biologiques

  • Kim, Ki-Tai
    • 환경생물
    • /
    • 제22권2호
    • /
    • pp.247-258
    • /
    • 2004
  • Climatological, hydrological and planktonical research studies, measurements of primary production and photosynthetic efficiency from December 1976 to December 1978 have been carried out in two brackish lakes: Lake Etang de Berre and Lake Etang de Vaine located in the French Mediterranean coast, in the region of Carry-le-Rouet located on the north-west Mediterranean near Marseilles, and in fresh water inflows from 4 Rivers (Touloubre, Durance, Arc, Durancole) to Lake Etang de Berre. Physico-chemical parameters were measured for this study: water temperature, salinity, density, pH, alcalinity, dissolved oxygen (% saturation), phosphate, nitrate, nitrite, silicate etc. Diverse biological parameters were also studied: photosynthetic pigments, phaeopigments, specific composition and biomass of phytoplankton, primary pelagic production etc. Climatical factors were studied: air-temperature, solar-radiation, evaporation, direction (including strength) of winds, precipitation and freshwater volume of the four rivers. The changes in Lake ‘Etang de Berre’ ecosystem depend on the quality of the water in the Durance River, and on the effects of seawater near the entrance of the Caronte Canal. The water quality of the lake varies horizontally and vertically as a result of atmospheric phenomena, maritime currents and tides. The distribution of water temperatures is generally heterogeneous. Southeasterly winds and the Northeasterly Mistral wind are important in the origins of circulated and mixed water masses. These winds are both frequent and strong. They have, as a result, a great effect on the water environment of Lake Etang de Berre. In theory, the annual precipitation in this region is well over eight times the water mass of the lake. The water of the Durance River flows into Lake Etang de Berre through the EDF Canal, amounting to 90% of the precipitation. However, reduction of rainfall in dry seasons has a serious effect on the hydrological characteristics of the lake. The temperature in the winter is partially caused by the low temperature of fresh water, particularly that of the Durance River. The hydrological season of fresh and brackish water is about one month ahead of the hydrological season of sea water in its vicinity. The salinity of Lake Etang de Berre runs approximately 3$\textperthousand$, except at lower levels and near the entrance to the Caronte Canal. However, when the volume of the Durance River water is reduced in the summer and fall, the salinity rises to 15$\textperthousand$. In the lake, the ratio of fresh water to sea water is six to one (6:1). The large quantities of seston conveyed by rivers, particularly the Durance diversion, strongly reduce the transparency in the brackish waters. Although the amount of sunshine is also notable, transparency is slight because of the large amount of seston, carried chiefly by Tripton in the fresh water of the Durance River. Therefore, photosynthesis generally occurs only in the surface layer. The transparency progressively increases from freshwater to open seawater, as mineral particles sink to the bottom (about 1.7kg $m^{-2}a^{-1}$ on the average in brackish lakes). The concentration of dissolved oxygen and the rate of oxygen saturation in seawater (Carry-le-Rouet) ranged from 5.0 to 6.0 $m\ell$ㆍ.$1^{-1}$, and from 95 to 105%, respectively. The amount of dissolved oxygen in Etang de Berre oscillated between 2.9 and 268.3%. The monographs of phosphate, nitrate, nitrite and silicate were published as a part of a study on the ecology of phytoplankton in these environments. Horizontal and vertical distributions of these nutriments were studied in detail. The recent diversion of the Durance River into Lake Etang de Berre has effected a fundamental change in this formerly marine environment, which has had a great impact in its plankton populations. A total of 182 taxa were identified, including 111 Bacillariophyceae, 44 Chlorophyceae, and 15 Cyanophyceae. The most abundant species are small freshwater algae, mainly Chlorophyceae. The average density is about $10^{8}$ cells $1^{-1}$ in Lake Etang de Berre, and about double that amount in Lake Etang de Vaine. Differences in phytoplankton abundance and composition at the various stations or at various depths are slight. Cell biovolume V (equivalent to true biomass), plasma volume VP (‘useful’ biomass) and, simultaneously. the cell surface area S and S/V ratio through the measurement of cell dimensions were computed as the parameters of phytoplankton productivity and metabolism. Pigment concentrations are generally very high on account of phytoplankton blooms by Cyanophyceae, Chlorophyceae and Cryptophyceae. On the other hand, in freshwaters and marine waters, pigment concentrations are comparatively low and stable, showing slight annual variation. The variations of ATP concentration were closely related to those of chlorophyll a and phytoplankton blooms only in marine waters. The carbon uptake rates ranged between 38 and 1091 mg$Cm^{-2}d^{-1}$, with an average surface value of 256 mg; water-column carbon-uptake rates ranged between 240 and 2310 mg$Cm^{-2}d^{-1}$, with an average of 810, representing 290 mg$Cm^{-2}$, per year 45 000 tons per year of photosynthetized carbon for the whole lake. Gross photosynthetic production measured by the method of Ryther was studied over a 2-year period. The values obtained from marine water(Carry-le-Rouet) ranged from 23 to 2 337 mg$Cm^{-2}d^{-1}$, with a weighted average of 319, representing about 110 gCm$^{-2}$ per year. The values in brakish water (Etang de Berre) ranged from 14 to 1778 mg$Cm^{-2}d^{-1}$, with a weighted average of 682, representing 250 mg$Cm^{-2}$ per year and 38 400 tons per year of photosynthesized carbon for the whole lake.

보리 출수기와 성숙기의 유전분석 및 내동성과의 관계 (Genetic Analyses of Heading and Maturing Dates and Their Relationship to Freezing Resistance in Barley)

  • 천종은;강석원
    • 한국작물학회지
    • /
    • 제47권6호
    • /
    • pp.395-401
    • /
    • 2002
  • 보리의 조숙 품종을 육성하기 위해서는 조기 출수인자에 단기 등숙성 인자를 도입하는 것이 중요하므로 출수기, 성숙기 및 등숙기간의 유전에 관한 정보를 얻고자 4개 품종(사천6호, 오월보리, 동보리1호, Reno), F$_1$, F$_2$세대의 종자를 포장에 파종, 재배하여 출수기, 성숙기 및 등숙기간을 조사하였다. 1. 출수기는 4월 3일-4월 26일, 성숙기는 5월 15일-5월 27일, 등숙기간은 31일-42일로 교배친 및 F$_1$ 조합간 차이가 현저하였다. 2. 부분 이면교잡에 의한 분산분석 결과, 출수기에 대해서 동보리1호(출수기 늦음)는 우성으로, 오월보리는(출수기 빠름) 열성으로, 출수기 유전은 유전자의 상가적 작용이 큰 부분우성으로 나타났다. 3. 성숙기에 대해서 동보리 1호가 우성으로, 오월보리가 열성으로, 성숙기 유전은 유전자의 상가적 작용 큰 부분우성으로 나타났다. 4. 등숙기간에 대해서 Reno(등숙기간이 짧음)가 우성으로 오월보리(등숙기간이 길음)은 열성으로 유전자의 상가적 작용이 큰 부분우성으로 나타났다. 5. 출수기, 성숙기에 대한 일반조합능력의 분산량은 고도의 유의성이 인정되고, GCA분산이 SCA분산보다 출수기는 10.1-29.5배, 성숙기는 9.9-121배 높아서 유전자의 상가적 작용이 컸으며, 사천6호와 오월보리는 출수와 성숙이 빠른 방향으로, 동보리 1호와 Reno은 늦어지는 방향으로 효과를 보였다. 6. 등숙기간에 대해선 GCA 효과는 F$_1$과 F$_2$ 세대간 유의적 차이가 있었고 GCA/SCA비가 크므로 유전자의 상가적 작용이 현저하였다. 7 포장 출수기, 성숙기는 결빙방지 단백질의 농도, 광합성의 광저해에 대한 내성, 포장 내동성과 고도의 정의 상관을, 등숙기간은 각 형질들과 부의 상관을 보였다. was "glossy and smooth" in all cases and preference about the texture was high. The Doenjang with added P. japonica Powder had a saltier taste and the Doenjang with P. japonica Powder had the least sweet taste. In the flavor and overall Preference, the Doenjang with P. japonica powder was the lowestEX>로 측정되었고, 계사내 지붕의 표면 온도는 최고 $29^{\circ}C$가 측정되었다. 계사 내 표면 온도 및 닭의 표면 온도는 계사내 공기온도의 영향을 많이 받는 것으로 나타났다.ill in a good agreement with those predicted by Rohsenow's formula, which was based on nucleate boiling. For the condenser, the wall temperatures were practically uniform, and the measured values of condensation heat transfer coefficient were 1.7 times higher than the predicted values obtained from Nusselt's film condensation theory on tilted plate. Using those two expressions, a correlation was formulated as a function of heat flux and tilt angle, to determine the total thermal resistance of a tilted thermosyphon.

수도 풍해경감을 위한 방풍강 강목의 효과 (Effect of Different Wind-break Net on Reducing Damage of Cold Sea Wind)

  • 이승필;김상경;이광석;최대웅;김칠용
    • 한국작물학회지
    • /
    • 제35권4호
    • /
    • pp.352-361
    • /
    • 1990
  • 동해안 랭조풍지대의 풍해 대표지역인 경북 영덕지방에서 1986년부터 1989년가지 4개년간 방풍강의 강목에 다른 풍해 경감효과와 농가포장 설치효과를 종합하면 다음과 같다. 1. 동해안 랭조풍지대의 1979년부터 1989년까지 11년간 태풍에 의한 백수 피해의 발생빈도는 8월 10일부터 9월 10일 사이에 높아 이 지역의 수도 안전출수한계기는 8월 10일 이전이 안전하다고 생각된다. 2. 이 지대는 태풍 통과시 증발계수가 250이상으로 높아 백수피해 위험도가 높으며 풍해를 유발시키는 바람의 종류는 태백산맥을 넘어오면서 휀(Fohn) 현상에 의한 고온건조한 편서풍과 해양에서 내륙으로부터 한랭과습한 랭조풍이었으며 도작기간중 발생빈도는 각각 25, 20%였다. 3. 방풍강 설치에 의한 풍속 감속효과는 방풍강의 강목이 좁을수록 컸으며, 방풍강이 설치된 지점으로부터 1m 거리에서는 23%, 10m 거리에서는 34%, 20m 거리에서는 28%였으며 그 효과는 설치된 방풍강 높이의 10배까지 있었다. 4. 방풍강 설치에 의한 기상개선효과는 무방풍구에 비해 방풍강의 강목이 좁을수록 컸으며 기온은 최고 0.8$^{\circ}C$, 최저 0.7$^{\circ}C$, 평균 0.6$^{\circ}C$ 상승되었고 수온은 최고 0.5$^{\circ}C$, 최저 0.6$^{\circ}C$, 평균 0.5$^{\circ}C$ 상승되었으며 지온도 0.4$^{\circ}C$ 상승되었다. 5. 방풍강에 의한 생육개선효과는 무방풍구에 비하여 방풍강의 강목이 좁을수록 컸으며 출수촉진, 개체군 생장속도 및 광이용율 증진, 간장신장, 주당수수, 수당영화수, 임실율, 천립중 등이 증가하여 방풍강의 강목(0.5$\times$0.5cm)에 따른 증수효과는 10%, 농가포장 설치효과는 15% 증수되었다. 6. 답면수온이 낮은 동해안 랭조풍지대에서는 주당묘수를 늘리는 것이 수수 확보에 유리하여 13% 증수효과가 있었으며 그 효과는 무방풍구에서 더욱 현저하였다. 7. 방풍강 설치에 의한 풍속 경감으로 동화기관의 고엽방지효과로 완전미의 비율이 높아 미질개선의 효과가 있었으며 벼알의 변색정도가 감소되었고 변색정도가 심할수록 증숙율과 천립중이 떨어졌으며 그 정도와 부의 상관관계가 있었다. 이상의 결과를 종합하면 태풍 발생빈도가 높은 동해안 랭조풍지대에서는 품종과 이앙기를 조절하여 풍해를 회피하거나 방풍림이나 방풍강을 설치하여 풍해를 경감시키는 것이 수량 생산의 안전성을 향상시킬 수 있을 것으로 생각된다.

  • PDF

은어의 자성발생 2배체와 Clone의 생리적 형질에 대한 유전적 변이성 : 수온과 염분내성 (Genetic Variation in Physiological Traits of Gynogenetic Diploid and Clonal Ayu, Plecoglosse altivelis : Tolerance to the Water Temperature and Salinity)

  • 한현섭
    • 한국발생생물학회지:발생과생식
    • /
    • 제4권2호
    • /
    • pp.153-160
    • /
    • 2000
  • 생리적 형질인 수온과 염분에 대한 내성을 양적 형질로 개발하기 위하여 은어의 정상 발생 2배체 (2N-cont),극체형 2배체 (meiotic-G2N), 난할형 2배체 (mitotic-G2N) 및 2종류의 clone (clone-11, clone-15)의 부화 자어를 대상으로 유전적 변이성을 조사했다. 수온은 19.$0^{\circ}C$ 22.5$^{\circ}C$, 25.$0^{\circ}C$ 그리고 30.$0^{\circ}C$로 설정하였고 각 수온구에 0$\textperthousand$, 15$\textperthousand$ 및 30$\textperthousand$의 염분구를 조합하여 12개의 실험구를 만들어 조사했다. 평균 생존시간 (MST)에서는 모든 수온 실험구에서 15$\textperthousand$실험구의 생존시간이 가장 길었다. 2N-cont가 126.16시간으로 가장 길었고, 다음이 clone으로 각각 113.22시간 (clone-11)과 91.05시간 (clone-15)이었다. 자성발생 2배체는 가장 낮은 87.32시간과 36.56시간이었다. 22,5$^{\circ}C$와 25.$0^{\circ}C$에서 각 계통의 MST는 현저하게 짧아졌지만 19.$0^{\circ}C$의 실험구와 유사한 결과가 나타나, 2N-cont의 MST가 가장 길었으며, clone의 MST는 자성발생 2배체보다 길었다. 이것은 자성발생으로 인해 악성의 유해 유전자가 동형접합화되면서 집단에 현재화하여 그 유전자를 갖는 개체가 조기에 폐사했기 때문이라 생각된다. 또 clone의 MST가 자성발생보다 길게 나타난 것은 어미 집단인 자성발생 1대에서 유해 유전자가 제거되었기 때문에 2대인 clone에서는 우량 유전자의 고정과 함께 내성과 생존성이 개선되었다고 생각된다 그리고 실험온도를 22.5$^{\circ}C$와 25.$0^{\circ}C$로 상승시켰을 경우 15$\textperthousand$에서 자성발생 2배체의 변이 확대와 clone의 변이 축소가 관찰되었다. 이것은 이 형질도 어느 정도의 유전성이 있는 형질이라는 것을 시사하고 있다. 따라서 이 형질을 양적형질로 개발하여 선발육종에 적용하면 우량 계통이나 개체를 확립할 수 있는 유용형질이 될 것이며 또한 선발에 의해 집단의 유전적 개량이 가능하다고 생각된다.

  • PDF

'캠벨얼리' 포도의 휴면기 눈 발달 및 수삽을 통한 발아 특성 조사 (Bud Development and Bud Break Characteristics in Water Cuttings of 'Campbell Early' Grapevine during Dormancy)

  • 이별하나;박요섭;권용희;한점화;박희승
    • 원예과학기술지
    • /
    • 제33권2호
    • /
    • pp.202-209
    • /
    • 2015
  • 본 연구는 수삽을 이용한 'Campbell Early' 포도나무의 발아 특성 관찰을 통해 눈의 내재 휴면 타파를 위한 저온축적과의 관계를 구명하고, 저온에 노출되는 동안 눈의 발달 양상을 관찰하여 발아와 휴면에 대한 기초자료를 마련하고자 하였다. 만개 120일 후(낙엽기 : 10월 7일)부터 시료를 수집하여 수삽하였으며, 만개 후 125일부터 온도가 $7.2^{\circ}C$도 이하로 내려가 CU 축적이 시작되었다. 발아율은 만개 150일 이후부터 100% 발아하였으나 165일 이후 수집된 가지에 비해 최초 발아까지의 기간이 2배 이상 소요되어 발아속도가 현저히 떨어졌다. 즉, 만개 165일 이후에는 100% 발아할 뿐만 아니라 발아 소요일수가 짧아 내재 휴면이 완전히 타파된 것으로 판단되었다. 이 기간 동안 CH 모델과 Utah 모델에 의한 저온 적산 값 계산 시, 각각 321h와 442CU로 조사되었다. 또한 이 시기 이후부터 주아의 생존율이 급격히 감소하였고, 제 1 부아의 생존율은 시기적인 차이 없이 90% 수준으로 높게 유지되었다. 화아형성이 이루어진 눈을 대상으로 조사된 주아 대비 부아의 비율은 내재 휴면이 타파되기 이전인 만개 후 150일에는 1:0.23으로 주아의 비율이 월등히 높았으나, 내재 휴면이 타파된 이후 최종적으로 만개후 255일에 이르러서는 1:1.54로 주아에 비해 부아의 비율이 높게 나타났다. 액아의 생존율 및 화아형성율과의 각 조사항목 간 상관분석에서는 주아에서만 상관관계가 인정되어 주아의 생존율 자체는 시기와 가장 밀접한 관련을 나타내었고, 주아의 생존율과 화아형성률 사이에 높은 정의 상관관계가 나타났다.

가열처리가 칡 이소플라본의 열 안정성에 미치는 영향 (Effect of Heat Processing on Thermal Stability of Kudzu (Pueraria thumbergiana Bentham) Root Isoflavones)

  • 최성원;김경선;허남윤;김동섭;안순철;박천석;김병용;백무열;김대옥
    • 생명과학회지
    • /
    • 제18권10호
    • /
    • pp.1447-1454
    • /
    • 2008
  • 열처리 조건 및 농도의 차이에 따른 칡 이소플라본인 daidzin과 genistin의 열 안정성에 대하여 조사하였다. Daidzin과 genistin 두 종류의 이소플라본은 처리방법에 상관없이 $140^{\circ}C$이상의 열처리 조건에서 초기 30분 동안 급격히 열 안정성이 떨어지고 그 이후 변화가 적게 나타나 처리 온도가 높을수록 열 안정성의 변화가 큰 것으로 나타났으며, genistin은 daidzin에 비해 농도차이 에 따른 변화의 차이가 크지 않은 것을 알 수 있었다. 또한 열처리 조건에 따른 반응속도는 모두 두 단계로 나타났는데, daidzin과 genistin 모두 2단계보다 1단계에서 빠른 반응속도를 보여 주었고, daidzin은 고농도 일 수록 더 빠른 반응속도를 나타내는 것을 알 수 있었으나, genistin은 농도에 따른 유의차가 적은 것을 알 수 있었다. Daidzin은 1단계의 고농도에서 온도 의존성이 높게 나타났으며 2단계는 농도에 따른 온도 의존성에 유의차가 없었다. Genistin의 경우 1단계에서는 농도에 의한 온도 의존성이 작게 나타났지만 2단계의 저농도에서 온도 의존성이 높은 것을 알 수 있었다. 농도에 따른 변화를 보면 genistin은 고농도와 저농도 모두 1단계에서 온도 의존성이 큰 것으로 나타났으며 반면 daidzin은 고농도, 저농도 모두 2단계에서 온도 의존성이 높은 것을 알 수 있었다. 또한 daidzin과 genistin 모두 $140^{\circ}C$ 이상의 열처리에 의해 이소플라본 glucosidic group이 열에 의해 가수분해되어 daidzein, genistein, glycitein, malonyl-glycitin, acetyl-genistin 등의 중간 유도체 및 aglycone이 생성되며 $140^{\circ}C$, 15 min의 처리 조건에서 대부분 가장 많은 양이 생성되는 것을 알 수 있었고, 농도 변화에 따른 함량의 증가는 유의차가 적은 것을 알 수 있었으나 그 중 malonyl daidzin의 경우 열처리 조건에 의해 따른 생성량의 차이가 큰 것을 알 수 있었다. 열처리 후 농축조건이 농축 후 열처리보다 더 많은 daidzin, genistin 유도체들을 생성시킨 것으로 보아 칡 이소플라본의 각 열처리 조건에 따른 열 안정성은 농축 후 열처리보다 열처리 후 농축이 훨씬 더 열에 안정하다는 것을 알 수 있었다. 따라서 칡 이소플라본의 열안정성은 콩 이소플라본과 유사하게 $140^{\circ}C$ 이상 열처리에 의해 가수분해반응을 보였고, 이소플라본의 중간 유도체들과 aglycone이 $140^{\circ}C$ 이상의 열처리 시 생성되었다. 따라서 칡 이소플라본의 열 안정성은 가열온도와 농도에 의해 큰 영향을 받으며, 콩 이소플라본의 열 안정성과 매우 유사한 특성을 나타내었다.

납의 흡입독성 연구를 위한 에어로졸 발생장치의 고안 및 실시간 모니터링을 이용한 성능평가 (Design of Aerosol Generator for Inhalation Toxicology Study of Lead and Evaluation with Real Time Monitoring)

  • 정재열;김정만;김태형;정명수;고광재;김상덕;강성호;송용선;이기남
    • 동의생리병리학회지
    • /
    • 제16권2호
    • /
    • pp.373-379
    • /
    • 2002
  • This paper was the design of aerosol generator for inhalation toxicology study of lead and evaluation with real time monitoring, and applied several engineering methodology to classical aerosol generator to cope with it's disadvantages. According to the testing conditions, source temperature 50℃ and inlet-duct band heater temperature 150℃, aerosol generation results for sodium chloride and lead acetate were as followings: CPM(Count Per Minute) for Sodium chloride that used for the testing material in aerosol generation and inhalation system was decreased in the 2nd and the 3rd hour's serial trials, but CVs(coefficient of variation) were maintained within 10%. CPMs for 5 and 2.5 gram of lead acetate that used for aerosol generation and inhalation exposure of lead showed similar results because of the sedimentation of lead acetate on piezoelectric crystal with time. For that reason, heating and mixing of nebulizing solution will be needed to generate lead aerosol with stable profile and maximum generation efficiency. Fluctuations of 10 and 5 gram lead acetate were low but 2.5gram was high. However, CVs for 10, 5, and 2.5gram lead acetate were within 10%. Considering the theoretical efficiencies for sodium chloride and lead acetate, 5gram sodium chloride and 2.5gram lead acetate were appropriate choice. Aerosol generation characteristics for two materials with 1 hour interval were different with respect to the fluctuation of CPM and the decrease to 10gram in it's material. For that reason, sodium chloride can not be used to estimate the aerosol generation and it's related parts for lead acetate. According to the testing conditions, source temperature 20, 50, 70℃, and inlet-duct band heater temperature 20, 50, 100, 150, 200℃, aerosol generation results for sodium chloride and lead acetate were as followings: Excluding inlet-duct band temperature 200℃, maximum CPM for sodium chloride was manifested in source temperature 70℃ with each inlet-duct band temperature conditions. We suggest that this condition was the optimum in the design of aerosol generator, inhalation system, and the testing. Maximum CPMs for 10, 5, and 2.5gram sodium chloride were from source temperature 70℃ and inlet-duct band temperature 20℃. Excluding inlet-duct band temperature 50, 200℃, maximum CPMs for lead acetate were indicated in source temperature 50℃ with each inlet-duct band temperature conditions. We suggest that this condition was the optimum in the design of aerosol generator, inhalation system, and the testing for lead inhalation study. Source and inlet-duct band temperatures for 10, 5, 2.5gram lead acetate were 50 and 100℃, 50 and 100℃, 50 and 150℃, respectively. In conclusion, considering above 2 paragraphs of results for aerosol generation, 5gram efficiencies for sodium chloride, lead acetate were higher than 2.5gram's. If inlet-duct band temperature was same, aerosol generation was increased with increase of source temperature. To get maximum aerosol generation will be the conditions that set the appropriate inlet-duel band temperature for each materials and increase the source temperature.

위성자료와 모델 재분석에서 유도된 중간 및 상부 대류권의 전지구 온도 경향 (Global Temperature Trends of Middle and Upper Tropospheres Derived from Satellite Data and Model Reanalyses)

  • 유정문;이지은
    • 한국지구과학회지
    • /
    • 제21권5호
    • /
    • pp.525-540
    • /
    • 2000
  • 중간 및 상부 대류권의 전구 온도 경향을 1980-97년 기간의 위성관측 MSU 직하점 채널2-3의 밝기온도와 1981-93년 기간의 세 종류의 대순환모델(NCEP, ECMWT, GEOS) 재분석 자료를 통하여 조사하였다. 전구, 북반구, 남반구, 열대 지역에 대한 이들 자료의 아노말리가 공통 기간에 대하여 다음 지역에서 세부적으로 계산된 후 비교되었다; 해양, 육지, 해양 및 육지, 중간 대류권의 경우에 MSU에 대한 모델들의 상관은 ECMWF에서 가장 높았으며(r=0.81${\sim}$0.95), 이러한 경향은 열대에서 현저하였다. 상부 대류권에서의 상관은 MSU 채널3 자료의 부정확성으로 인하여 낮았으며(r=0.06${\sim}$0.34), 이는 기존 연구와 일치하였다. 중간 대류권에서의 전구 온도 경향은 위성관측과 모델들에서 0.01${\sim}$0.18K decade$^{-1}$의 온난화를 보였다. 여기서 엘니뇨 기간인 1987, 1991년에 양의 아노말리, 그리고 라니냐 기간인 1993, 1994년에는 음의 아노말리를 보였다. MSU에서 온난화 경향의 세기는 해양과 육지에서 비슷하였다(0.12${\sim}$0.13K decade$^{-1}$). 상부 대류권에서 MSU와 모델들 사이의 가장 큰 불일치는 MSU 채널3 자료의 오차로 인하여 NOAA 9와 10의 교체 기간(1984. 12-1985. 1)에 나타났다. 한반도 부근의 중간 대류권에서 온도 경향은 1981-93년 기간에 위성관측에서 거의 무시할 만하였으나(-0.02K decade$^{-1}$), 모델들에서 상당한 온난화(0.25${\sim}$0.43K decade$^{-1}$)를 보였다. 이러한 경향들을 Spencer and Christy(1992a, 1992b)의 독립적인 MSU 결과들과 비교 ${\cdot}$ 토의하였다.

  • PDF

실내 환경 개선에 적합한 식물 선발을 위한 온도, 광도, 이산화탄소 농도에 따른 관엽식물들의 생리적 반응 (Plant Physiological Responses in Relation to Temperature, Light Intensity, and CO2 Concentration for the Selection of Efficient Foliage Plants on the Improvement of Indoor Environment)

  • 박신애;김민지;류명화;오명민;손기철
    • 원예과학기술지
    • /
    • 제28권6호
    • /
    • pp.928-936
    • /
    • 2010
  • 본 연구는 관엽식물 8종을 선정하여 온도, 광도, 이산화탄소 농도에 따른 식물의 광합성률을 포함한 생리반응을 살펴 보고, 그에 따른 실내 환경 개선에 효과적인 식물을 구명하고자 실시하였다. 식물재료로는 헤데라, 벤자민 고무나무, 파키라, 스파티필름, 시서스, 디펜바키아, 스킨답서스, 싱고니움을 사용하였으며, $16^{\circ}C$$22^{\circ}C$ 온도조건하에서 광도는 PPFD 0, 25, 50, 75, 100, 150, 300, 또는 $600{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$의 수준으로, 이산화탄소 농도는 0, 50, 100, 200, 400, 700, 또는 $1,000{\mu}molCO_2{\cdot}mol^{-1}$의 수준으로 조절하여 휴대용 광합성 측정기(Li-6400, Li Cor, USA)로 관엽식물들의 광합성 효율과 증산율을 측정하였다. 광도, 엽육내 이산화탄소 농도 변화, 그리고 온도에 따른 관엽식물들의 광합성 반응은 매우 다양했다. 약광(PPFD $0-100{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$)에서의 광합성 능력을 나타내는 순양자수율은 디펜바키아를 제외한 대부분의 종에서 높게 나타났으며, 고광(PPFD $200-600{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$)에서는 헤데라, 벤자민 고무나무, 파키라, 스파티필름이 높은 광합성능력을 나타내었다. 이산화탄소를 고정하는 암반응과 관련된 탄소고정효율은 시서스와 싱고니움을 제외한 6종의 관엽식물들에서 비교적 높게 나타났다. 고농도의 이산화탄소에서 광합성률이 높은 식물은 헤데라와 스파티필름이었으며, $22^{\circ}C$에서 자란 벤자민 고무나무와 파키라도 높은 광합성률을 보였다. 한편, 헤데라, 스파티필름은 증산율도 높게 나타났다. 따라서 저광, 고농도의 이산화탄소, 낮은 상대습도가 특징인 일반 가정이나 사무실 같은 실내 환경을 고려했을 때 헤데라, 벤자민 고무나무, 파키라, 스파티필름 등을 이용하는 것이 실내 환경 개선에 효과적이라고 판단되었다.

$^1H-NMR$을 이용한 계피의 t-cinnamaldehyde 정량분석 (Quantitative Analysis of t-Cinnamaldehyde of Cinnamomum cassia by $^1H-NMR$ Spectrometry)

  • 송명종;유종수;백남인
    • Applied Biological Chemistry
    • /
    • 제48권3호
    • /
    • pp.267-272
    • /
    • 2005
  • 계피(계지, Cinnanmomum cassia)의 주요성분인, trans-cinnamaldehyde를 $^1H-NMR$ 분광법을 이용하여 정량분석하였다. 핵자기 공명법을 이용한 정량분석의 응용가능성을 확인하기 위하여, t-cinnamaldehyde의 $^1H-NMR$ 스펙트럼에서 시료의 농도와 측정온도를 변화시킴에 따라 chemical shift의 변화와 적분값의 변화를 관찰하였다. t-Cinnamaldehyde(7.1429 mg/ml)를 19, 25, 30, 40 및 $50^{\circ}C$ 하에서 $^1H-NMR$ 측정한 결과, aldehyde methine signal(doublet)의 chemical shift가 9.7202, 9.7184, 9.7169, 9.7142 및 9.7124 ppm에서 관측되었다. 이는 측정온도는 signal의 chemical shift의 변화에 중요한 변수가 되지 않는다는 것을 의미하였다. 또한, aldehyde signal의 적분값이 $1.37(19^{\circ}C),\;1.37(25^{\circ}C),\;1.37(30^{\circ}C),\;1.37(40^{\circ}C)$$1.37(50^{\circ}C)$로써, 측정온도가 signal의 적분값에는 전혀 영향을 미치지 않는 것으로 나타났다. 동일한 온도 $25^{\circ}C$에서 0.4464, 0.8929, 1.7857, 3.5714, 7.1429 및 14.286 mg/ml의 농도의 시료에 대한 $^1H-NMR$ 측정 결과, aldehyde기의 chemical shifts는 각각 9.7206, 9.7201, 9.7196, 9.7192, 9.7185 및 9.7174 ppm에서 나타났다. 이는 각 시료의 농도가 증가함에 따라서 aldehyde의 signal이 고자장으로 약간 이동하는 것으로 나타났다. Aldehyde기의 doublet methine signal의 적분값과 각 시료의 농도에 따른 calibration curve는 직선으로 나타났으며, 매우 높은 회귀율($r^2=1.0000$)을 보였다. t-Cinnamaldehyde와 aldehyde기를 갖는 물질로써, C. cassia의 또 다른 구성성분인 t-2-methoxycinnamaldehyde($7.1429\;mg/ml\;CDCl_3,\;25^{\circ}C$)에 대해서, $^1H-NMR$ 스펙트럼을 측정한 결과, t-cinnamaldehyde는 ${\delta}_H$ 9.7174(9.7078, 9.7270)서 관측되었다. t-2-Methoxycinnamaldehyde는 ${\delta}_H$ 9.6936(9.6839, 9.7032)에서 관측되었다. 따라서, 두 화합물의 chemical shift의 차이는 resolution 값이 0.45 Hz인 NMR 스펙트럼 상에서 충분히 구분할 수 있을 정도로 나타났다. 위의 방법을 이용하여, 추출용매에 따른 C. cassia 내의 t-cinnamaldehyde의 함량을 분석한 결과, n-hexane, $CHCl_3$ 및 EtOAc로 추출하였을 때에, 각각 94.2 mg/g(0.94%), 137.6 mg/g(1.38%), 140.1 mg/g(1.40%)으로 결정되었다.