• Journal of Microbiology and Biotechnology
• /
• 제6권3호
• /
• pp.209-212
• /
• 1996

A two-step cooling technique has been developed for cryopreservation of suspension cultured Scutellaria baicalensis cells. Efficient regrowth of cryopreserved cells was obtained in cryoprotected cells with a mixture of 1.5 M glycerol and 0.4 M sucrose in Schenk and Hildebrandt medium without pretreatment in high osmotic medium. Optimum freezing conditions were found to be a cooling rate of $0.5^{\circ}C$ min from $4^{\circ}C$ to $-40^{\circ}C$, and then retaining samples at $-40^{\circ}C$ for 30 min prior to plunging into liquid nitrogen. A regrowth rate of approximately 95$%$ was obtained after three month storage in liquid nitrogen. Callus cultures established from the cryopreserved cells were found to produce the same patterns of flavonoid accumulation and retain their baicalin producing activity.

• 설비공학논문집
• /
• 제16권2호
• /
• pp.111-120
• /
• 2004

The optimal design method of indoor thermal environment using CFD coupled simulation and genetic algorithms (GA) is developed in this study. CFD could analyze the thermal environment considering the distribution of temperature, velocity, etc. in a room. Therefore, It would be appropriate to use CFD for the optimal design method considering their distribution. In this paper, the optimal design means the most appropriate boundary conditions of the room among the conditions where the design target of indoor therm environment is achieved. Two step optimal indoor thermal environment design method is proposed. It includes the GA for searching the optimal indoor thermal environment design. To examine the performance of this method, the optimal design of hybrid ventilation system, which uses the natural cross ventilation and the radiation-cooling panel is conducted. The optimal design which satisfies the design target (thermal comfort, minimum cooling load, minimum vertical temperature difference) is found using two step optimal design method.

• ALGAE
• /
• 제18권4호
• /
• pp.321-331
• /
• 2003

Cryopreservation of sporothalli of the red alga Porphyra (P. seriata, P. yezoensis, P. tenera, P. pseudolinearis and P. dentata) was performed by the two-step cooling method in liquid nitrogen. The algal samples were suspended in various cryoprotective solutions, and slowly cooled to -40$^{\circ}C$ in 4 hours using a programmed freezer. After the first slow cooling the suspensions with cryoprotectants were immediately immersed in liquid nitrogen. The suspension from the programmed freezer was thawed quickly by agitation of the vial in a water bath at 40°C. When ice in the suspension of cryogenic vial was mostly melted, the vial was transferred to an ice bath for complete melting of the residual ice. The cryoprotectants in the vial were washed off by gradual dilution with seawater. The viability of the cell was assessed with neutral red staining. The viability of Porphyra samples ranged 54.6-70.9% when the mixed suspension of 10% dimethylsulfoxide and 0.5 M sorbitol in 50% seawater used as a cryoprotectant.

• 한국군사과학기술학회지
• /
• 제27권1호
• /
• pp.43-50
• /
• 2024

Large planar military antenna boasts a range of electrical components, including TRA(Transmit-Receive Assembly), signal processors, etc. which engage in computations and calculations. These processes generate a significant amount of heat, leading to unforeseen consequences for the equipment. To mitigate these adverse effects, it's imperative to implement a cooling system that can effectively reduce heat-related issues. Given the antenna's intricate nature and the multitude of components it houses, a two-step estimation process is necessary. The first step involves a comprehensive model calculation to determine the total flow characteristics, while the second step entails a thermal analysis of individual TRA set. In this study, we depicted an antenna set using simplified 3D models of its components, considering their material and thermal properties. The sequential analysis process facilitated the calculation of branched flow rates, providing insights into the individual TRA. This approach also allowed us to design a cooling system for the TRA set, assessing its thermal stability in high-temperature environments. To ensure the optimal performance of TRA, breaking down the analysis into stages based on the cooling system's structure can assist operators in predicting numerical results more effectively.

• 한국주조공학회지
• /
• 제37권4호
• /
• pp.108-114
• /
• 2017

In this study, we investigated the effect of the Si content on the secondary dendrite arm spacing (SDAS) of hypoeutectic Al-Si binary alloys in the range of 4~10 wt% Si. Cooling curves were measured during the solidification of the alloy cast in a step-wise mold. We compared two kinds of solidification time: the first is the total solidification time for both dendritic and eutectic growth, and the second is the solidification time for only dendritic growth. The proportional constant in the relationship between SDAS and cooling rate was estimated, as this constant represents the stability of the cast microstructure. The proportional constant decreased with the Si contents from 4 wt% to 8 wt%, and it remains relatively uniform with up to 10 wt% of Si.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 13th KACG Technical Meeting `97 Industrial Crystallization Symposium(ICS)-Doosan Resort, Chunchon, October 30-31, 1997
• /
• pp.1-5
• /
• 1997

The growth mechanism of AMT(Ammonium Meta-Tungstate) crystal was interpreted as two-step model. The contribution of the diffusion step increased with the increase of temperature, crystal size, and supersaturation. The crystal size distribution from a batch cooling crystallizer was predicted by the numerical solution of a mathematical model which uses the kinetics of nucleation and crystal growth. Temperature control of a batch crystallizer was studied using Learning control algorithm. The purity of AMT crystal producted in this investigation was above 99.99%.

• 한국자기학회지
• /
• 제10권1호
• /
• pp.7-10
• /
• 2000

Co계 비정질합금을 400~46$0^{\circ}C$에서 열처리 한 후 냉각조건에 따른 자기특성의 변화를 조사하였다 42$0^{\circ}C$에서 30분 열처리 한 뒤 큐리점까지 노냉 후 수냉 시킨 경우 초투자율이 수냉 또는 노냉 했을 때보다 60-100% 정도 증가했다. 냉각속도에 따른 자기적 특성 변화를 내부음력 및 이온쌍의 규칙도(ordering) 관점에서 고찰하였다

• Bulletin of the Korean Chemical Society
• /
• 제21권3호
• /
• pp.281-290
• /
• 2000

We varied recombination method of fenetic algorithm (GA), i.e., crossover step, to compare efficiency of these methods, and to find more optimum GA method. In one method (A), we select two conformations(parents) to be recombined by systematic combination of lowest energy conformations, and in the other (B), we select them in a ratio proportional to the energy of the conformation. Second variation lies in how to select crossover point. First, we select it randomly(1). Second, we select range of residues where internal energy of the molecule does not vary for more than two residues, select randomly among such regions, and we select either thr first (2a) or the second residue (2b) from the N-terminal side, or the first (2c) or the second residue (2d) from the C-terminal side in the selected region for crossover point. Third, we select longest such hregion, and select such residue(as cases 2) (3a, 3b, 3c or 3d) of the region. These methods were tested in a 2-dimensionl lattice system for 8 different sequences (the same ones used by Unger and Moult., 1993). Results show that compared to Unger and Moult's result(UM) which corresponds to B-1 case, our B-1 case performed similarly in overall. There are many cases where our new methods performed better than UM for some different sequences. When cooling factor affecting higher energy conformation to be accepted in Monte Carlo step was reduced, our B-1 and other cases performed better than UM; we found lower energy conformers, and found same energy conformers in a smaller steps. We discuss importance of cooling factor variation in Monte Carlo simulations of protein folding for different proteins. (A) method tends to find the minimum conformer faster than (B) method, and (3) method is superior or at least equal to (1) method.

• 소성∙가공
• /
• 제11권7호
• /
• pp.581-588
• /
• 2002

Among the processes to produce micro lens, the process using press molding is a new technology to simplify the process, but it contains many unknown variables. The press-molding process proposed in this paper was simplified into two step process, the first step is the pressing to design the preform for glass element, the second step is the annealing to reduce the residual stress. It is important to estimate the amount of shrinkage of glass gob and the residual stress during process. It Is difficult to evaluate the process variables as mentioned above through the experiment. The influences due to process variables was evaluated by using FEM parametric analysis. The results in this paper can be applicable to produce micro lens.

• 공업화학
• /
• 제29권5호
• /
• pp.594-603
• /
• 2018

본 연구는 VOC 제거 기술인 TSA 공정에서 제올라이트 13X와 활성탄이 채워진 두 종류의 탑을 사용하여 원료농도, 질소 유량, 수증기 유량, 탑 온도 등 조업조건의 영향을 분석하였다. 본 연구의 TSA 사이클은 흡착단계, 수증기 탈착단계, 건조 및 냉각단계로 구성되었다. 2% 벤젠 농도에서 제올라이트 13X와 활성탄의 사이클 당 전체 흡착량은 각각 4.44 g과 3.65 g으로 활성탄보다 충전밀도가 큰 제올라이트 13X가 더 많은 양의 벤젠을 흡착할 수 있었다. 수증기 탈착의 결과에서 수증기 유량을 증가시키고 탑의 외부 가열로 온도를 높이면 탈착시간이 짧아지고 배출되는 벤젠의 농도가 높아지는 것으로 나타났다. 2% 벤젠 농도에서 수증기 유량을 75 g/hr로 증가시키면 탈착시간이 1 hr에서 최대 33 min까지 단축되어 상대적으로 건조 및 냉각단계의 시간이 늘어나 수증기 제거와 탑 냉각을 충분히 진행할 수 있었다. 탑 온도를 높이면 탈착량이 증가하나 $150^{\circ}C$ 이상에서는 에너지소비는 증가하는 반면 탈착량은 거의 일정했다. 연속 사이클 조업에서 재생단계 완료 시 잔존하게 되는 벤젠의 비율이 늘어나면 흡착제 working capacity 감소의 원인이 될 수 있다. 제올라이트 13X를 이용해 연속 사이클 공정실험을 수행한 결과 탑 내부에 잔존하는 벤젠의 비율이 4번째 사이클 이후 일정한 값으로 유지되었다.