• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.523-523
• /
• 2012

As the wafer geometric requirements continuously complicated and minutes in tens of nanometers, the expectation of real-time add-on sensors for in-situ plasma process monitoring is rapidly increasing. Various industry applications, utilizing plasma impedance monitor (PIM) and optical emission spectroscopy (OES), on etch end point detection, etch chemistry investigation, health monitoring, fault detection and classification, and advanced process control are good examples. However, process monitoring in semiconductor manufacturing industry requires non-invasiveness. The hypothesis behind the optical monitoring of plasma induced ion current is for the monitoring of plasma induced charging damage in non-invasive optical way. In plasma dielectric via etching, the bombardment of reactive ions on exposed conductor patterns may induce electrical current. Induced electrical charge can further flow down to device level, and accumulated charges in the consecutive plasma processes during back-end metallization can create plasma induced charging damage to shift the threshold voltage of device. As a preliminary research for the hypothesis, we performed two phases experiment to measure the plasma induced current in etch environmental condition. We fabricated electrical test circuits to convert induced current to flickering frequency of LED output, and the flickering frequency was measured by high speed optical plasma monitoring system (OPMS) in 10 kHz. Current-frequency calibration was done in offline by applying stepwise current increase while LED flickering was measured. Once the performance of the test circuits was evaluated, a metal pad for collecting ion bombardment during plasma etch condition was placed inside etch chamber, and the LED output frequency was measured in real-time. It was successful to acquire high speed optical emission data acquisition in 10 kHz. Offline measurement with the test circuitry was satisfactory, and we are continuously investigating the potential of real-time in-situ plasma induce current measurement via OPMS.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.33-37
• /
• 2006

Since 1993, the civil aviation community through RTCA (Radio Technical Commission for Aeronautics) and the ICAO (International Civil Air Navigation Organization) have been working on the definition of GNSS augmentation systems that will provide improved levels of accuracy and integrity. These augmentation systems have been classified into three distinct groups: Aircraft Based Augmentation Systems (ABAS), Space Based Augmentation Systems (SBAS) and Ground Based Augmentation Systems (GBAS). The last one is an implemented system to support Air Navigation in CAT-I approaching operation. It consists of three primary subsystems: the GNSS Satellite subsystem that produces the ranging signals and navigation messages; the GBAS ground subsystem, which uses two or more GNSS receivers. It collects pseudo ranges for all GNSS satellites in view and computes and broadcasts differential corrections and integrity-related information; the Aircraft subsystem. Within the area of coverage of the ground station, aircraft subsystems may use the broadcast corrections to compute their own measurements in line with the differential principle. After selection of the desired FAS for the landing runway, the differentially corrected position is used to generate navigation guidance signals. Those are lateral and vertical deviations as well as distance to the threshold crossing point of the selected FAS and integrity flags. The Department of Applied Science in Naples has create for its study a virtual GBAS Ground station. Starting from three GPS double frequency receivers, we collect data of 24h measures session and in post processing we generate the GC (GBAS Correction). For this goal we use the software Pegasus V4.1 developed from EUROCONTROL. Generating the GC we have the possibility to study and monitor GBAS performance and integrity starting from a virtual functional architecture. The latter allows us to collect data without the necessity to found us authorization for the access to restricted area in airport where there is one GBAS installation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.1
• /
• pp.111-122
• /
• 2014

The provided habitat of many services from natural capital is important. But because most ecosystem services tools qualitatively evaluated biodiversity or habitat quality, this study quantitatively analyzed those aspects using the species distribution model (MaxEnt). This study used location point data of the goat(Naemorhedus caudatus), marten(Martes flavigula), leopard cat(Prionailurus bengalensis), flying squirrel(Pteromys volans aluco) and otter(Lutra lutra) from the 3rd National Ecosystem Survey. Input data utilized DEM, landcover classification maps, Forest-types map and digital topographic maps. This study generated the MaxEnt model, randomly setting 70% of the presences as training data, with the remaining 30% used as test data, and ran five cross-validated replicates for each model. The threshold indicating maximum training sensitivity plus specificity was considered as a more robust approach, so this study used it to conduct the distribution into presence(1)-absence(0) predictions and totalled up a value of 5 times for uncertainty reduction. The test data's ROC curve of endangered mammals was as follows: growing down goat(0.896), otter(0.857), flying squirrel(0.738), marten(0.725), and leopard cat(0.629). This study was divided into two groups based on habitat: the first group consisted of the goat, marten, leopard cat and flying squirrel in the forest; and the second group consisted of the otter in the river. More than 60 percent of endangered mammals' distribution probability were 56.9% in the forest and 12.7% in the river. A future study is needed to conduct other species' distribution modeling exclusive of mammals and to develop a collection method of field survey data.

• English & American cultural studies
• /
• v.10 no.2
• /
• pp.149-207
• /
• 2010

Written simultaneously with Prometheus Unbound, Shelley's "Julian & Maddalo" is a masterwork of dramatic poiesis, of doubling embedded in its couplets, dialogic debate on human nature and contrasted symbolic emblems. The emblems mirror each other and are themselves sites of generative paradox: the "heaven illumined" but "dreary tower" of the Maniac and the glorious sunsets on the "ever-shifting sand" of the Lido, a wasteland that is a place of self discovery but also of "abandonment" and barren mingling figured, inter alia, in its "amphibious weeds," a trope of the poem's personae. This essay also explores the poem's dramatic structure and various rhetorical devices, beginning with the Preface, a threshold of complex identity disguise that Shelley uses for veiled self-presentation, as in "Alastor," mirroring and literary references replete with nuanced ironies. I focus mainly on the complex figures of liminality Shelley uses to develop his own thoughts (as well as his ongoing debates with Byron) about man's potential for growth in thought, insight and empathy, in political reform and interpersonal and individual healing. Advancing Shelley's most optimistic ideas, Julian, escorted by Maddalo observes the Maniac, -- a living ruin whose pained eloquence reveals the link of eros to poiesis and the limits of the latter's ability to 'transform a world.' The Maniac is the core of muse-work (remembering, thinking and song) and Shelley presents him as its emblem. He also is prefigured in and reflects the quintessentially liminal Lido with its "barren embrace" of sea and land. Yet it is less the Maniac's feeling that his grief is "charactered in vain…on this unfeeling leaf" than Julian's rationales for leaving the site of pain that point to Shelley's final comment on poetry's transformative limits. As the primary haploids of the drama's meiosis re-combine and two of them, Maddalo and the maniac fall away, an analogy I briefly develop and embedded in the erotic dynamics of poiesis, Shelley suggests, as he did at the beginning of his poetic lyricism in "Alastor" and at its end in "the Triumph of Life"that images mislead and delude; that "the deep truth is imageless" and redemption is not in but beyond figuration.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_2
• /
• pp.837-847
• /
• 2023

In this study, we explored a method for assessing the extent of damage caused by chemical substances at an accident site through the use of a vegetation index. Data collection involved the deployment of two different drone types, and the damaged area was determined using photogrammetry technology from the 3D point cloud data. To create a vegetation index image, we utilized spectral band data from a multi-spectral sensor to generate an orthoimage. Subsequently, we conducted statistical analyses of the accident site with respect to the damaged area using a predefined threshold value. The Kappa values for the vegetation index, based on the near-infrared band and the green band, were found to be 0.79 and 0.76, respectively. These results suggest that the vegetation index-based approach for analyzing damage areas can be effectively applied in investigations of chemical accidents.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.27 no.3
• /
• pp.168-175
• /
• 2024

Purpose: The presence of alcoholic stool in biliary atresia (BA) patients is the basis of a stool color card (SCC), a screening tool that has led to more patients receiving Kasai portoenterostomy earlier. This study aimed to evaluate the color image processing of stool images captured using smartphones. We propose that measuring digital color parameters is a more objective method for identifying BA stools and may improve the sensitivity of BA screening. Methods: A prospective study was conducted in five hospitals in Thailand between October 1, 2020, and December 31, 2021. Stools from infants presenting with jaundice, acholic stool, or dark-colored urine were photographed. Digital image color analysis was performed, and software was developed based on the color on the original SCC. Sensitivity and specificity for predicting BA stools were compared between the SCC and the software. Results: Of 33 infants eligible for data collection, 19 were diagnosed with BA. Saturation and blue were two potential digital color parameters used to differentiate BA stools. The receiver operating characteristic curve was used to determine the optimum cutoff point of both values, and when saturation ≤56 or blue ≥61 was set as a threshold for detecting BA stool, high accuracy was achieved at 81.8% and 78.8%, respectively. Conclusion: Digital image processing is a promising technology. With appropriate cutoff values of saturation in hue, saturation, value and blue in red, green, blue color models, BA stools can be identified, and equivocal-colored stools of non-BA patients can be differentiated with acceptable accuracy in infants presenting with jaundice.

• Journal of Apiculture
• /
• v.32 no.1
• /
• pp.27-39
• /
• 2017

PCR-chip-based ultra-rapid multiplex PCRs for detection of six major infectious pathogens in honeybee were developed. The 6 kinds of major infectious pathogens in honeybee included Paenibacillus larvae causing American Foulbrood, Melissococcus plutonius causing European Foulbrood as bacteria, Ascosphaera apis (Chalkbrood), Aspergillus flavus (Stonebrood), Nosema apis and Nosema ceranae (Nosemosis) as fungi. The developed PCR-chip-based ultra-rapid multiplex PCR showed successful amplification for all six major pathogens in the presence of more than $10^3$ molecules. The time for confirming amplification (Threshold cycles; Ct-time) was about 7 minutes for two species, and about 9 minutes for four species. Total 40 cycles of PCR took 11 minutes 42 seconds and time for melting point analysis was 1 minute 15 seconds. Total time for whole PCR detection was estimated 12 minutes 57 seconds (40 cycles of PCR and melting point analysis). PCR-chip based ultra-rapid multiplex PCR using standard DNA substrates showed close to 100% accuracy and no false-amplification was found with honeybee genomic DNA. Ultra-rapid multiplex PCR is expected to be a fast and efficient pathogen detection method not only in the laboratory but also in the apiary field.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.4
• /
• pp.417-424
• /
• 2010

The purpose of this study was to detect significant SNPs for carcass quality traits using DNA chips of high SNP density in Hanwoo populations. Carcass data of two hundred and eighty nine steers sired by 30 Korean proven sires were collected from two regions; the Hanwoo Improvement Center of National Agricultural Cooperative Federation in Seosan, Chungnam province and the commercial farms in Gyeongbuk province. The steers in Seosan were born between spring and fall of 2006 and those in Gyeonbuk between falls of 2004 and 2005. The former steers were slaughtered at approximately 24 months, while the latter steers were fed six months longer before slaughter. Among the 55,074 SNPs in the Illumina bovine 50K chip, a total of 32,756 available SNPs were selected for whole genome association study. After adjusting for the effects of sire, region and slaughter age, phenotypes were regressed on each SNP using a simple linear regression model. For the significance threshold, 0.1% point-wise p value from F distribution was used for each SNP test. Among the significant SNPs for a trait, the best set of SNP markers were selected using a stepwise regression procedure, and inclusion and exclusion of each SNP out of the model was determined at the p<0.001 level. A total of 118 SNPs were detected; 15, 20, 22, 28, 20, and 13 SNPs for final weight before slaughter, carcass weight, backfat thickness, weight index, longissimus dorsi muscle area, and marbling score, respectively. Among the significant SNPs, the best set of 44 SNPs was determined by stepwise regression procedures with 7, 9, 6, 9, 7, and 6 SNPs for the respective traits. Each set of SNPs per trait explained 20-40% of phenotypic variance. The number of detected SNPs per trait was not great in whole genome association tests, suggesting additional phenotype and genotype data are required to get more power to detect the trait-related SNPs with high accuracy for estimation of the SNP effect. These SNP markers could be applied to commercial Hanwoo populations via marker-assisted selection to verify the SNP effects and to improve genetic potentials in successive generations of the Hanwoo populations.

• Journal of National Security and Military Science
• /
• s.8
• /
• pp.1-48
• /
• 2010

The purpose of this study is to examine and analyze the Untied Nations' efforts for peace on Korean peninsular after CCF's participation in Korean War. The Untied Nation tried to negotiate th peace plan between two sides from the end of 1950. Once the CCF's entry into the war had been confirmed, the war situation moved to a new phase, and the UN forces, which had guided the war in an effort to destroy the NKP A forces, and to punish North Korea, had to set up new guidelines to cope with the new situation. Accordingly, in late November, 1950, the UN forces camp, mainly the US Joint Chiefs of Staff and the United Nations Command, discussed various options, such as an expansion of the war up to the Chinese territory, a cease fire along the 38th Parallel, or a forced and inevitable evacuation. The Korean delegation to the UN insisted that "the unification of Korea should be achieved only by victory in the war. The Chinese intervention in the war is a Challenge to the UN in the same way as the North Korean invasion. The UN participation in the war was to repulse the invasion. With the same spirit we should drive back the Chinese Communists." The Korean delegation also emphasized to the friendly nations the political objective and will of unification, and that a cease fire at a threshold of unification might return us to the status quo ante bellum, and would be contrary to the Korean nation's desire. At that time, particularly, the US strongly considered the employment of nuclear weapons as one of the new strategies to cope with the Chinese invasion. The international effects of these casual remarks were realized almost at once. The British Prime Minister who had not wanted the expansion of war in the Far East, especially from the view point of the interest of NATO's security, visited Washington. so the conference had a very important meaning for the UN forces' new strategy. On the other hand, at the UN, on the 5th of December, the very day Truman and Attlee agreed to seek a cease-fire under UN auspices, a group of thirteen Asian and Arab states proposed to ask China and North Korea not to cross the 38th Parallel, and sounded out both sides about a cease fire along the 38th Parallel. The United States and the United Kingdom gave their assent, but China and North Korea gave no direct response. The CCF, who were securing the initiative of operation, were not agreeable with the proposal of the UN forces. The Untied Nation has tried to negotiate th peace plan between two sides from the December of 1950 and January of 1951. The Untied Nations' has achieved great results to negotiate for the peace plan on Korean peninsular after CCF's participation in Korean War. It's the results considering both the operation situation and political opinions.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.329-335
• /
• 2010

Digital imaging detectors can use a variety of detection materials to convert X-ray radiation either to light or directly to electron charge. Many detectors such as amorphous silicon flat panels, CCDs, and CMOS photodiode arrays incorporate a scintillator screen to convert x-ray to light. The digital radiography systems based on semiconductor detectors, commonly referred to as flat panel detectors, are gaining popularity in the clinical & hospital. The X-ray detectors are described between a-Silicon based indirect type and a-Selenium based direct type. The DRS of detectors is used to convert the x-ray to electron hole pairs. Image processing is described by specific image features: Latitude compression, Contrast enhancement, Edge enhancement, Look up table, Noise suppression. The image features are tuned independently. The final enhancement result is a combination of all image features. The parameters are altered by using specific image features in the different several hospitals. The image in a radiological report consists of two image evaluation processes: Clinical image parameters and MTF is a descriptor of the spatial resolution of a digital imaging system. We used the edge test phantom and exposure procedure described in the IEC 61267 to obtain an edge spread function from which the MTF is calculated. We can compare image in the processing parameters to change between original and processed image data. The angle of the edge with respect to the axes of detector was varied in order to determine the MTF as a function of direction. Each MTF is integrated within the spatial resolution interval of 1.35-11.70 cycles/mm at the 50% MTF point. Each image enhancement parameters consists of edge, frequency, contrast, LUT, noise, sensitometry curve, threshold level, windows. The digital device is also shown to have good uniformity of MTF and image parameters across its modality. The measurements reported here represent a comprehensive evaluation of digital radiography system designed for use in the DRS. The results indicate that the parameter enables very good image quality in the digital radiography. Of course, the quality of image from a parameter is determined by other digital devices in addition to the proper clinical image.