• 디자인학연구
• /
• 제20권
• /
• pp.147-158
• /
• 1997

사용자와 생산자 모두의 편익을 추구하는 산업디자인은 최적 설계와 생산을 위해 속성 중심의 접근방식으로 소비자 니즈와 욕구를 파악하고 분석하는 활동을 필요로 한다. 그러나 제품속성 전반에 걸친 디자인활동에 대한 총체적 이해와 주요속성 파악을 위한 적절한 방법론의 채택이 이루어지지 않는다면, 속성중심접근법은 그 유용함에도 불구하고 산업디자이너가 신제품을 효과적으로 개발하는 데에 부족할지 모른다. 이 연구는 문헌자료를 통해 제품속성에 대한 디자인활동의 특성을 이해하고, 소비자 선택에 초점을 둔 디자인조사모델과 실제 구매의사 결정과정의 각 국면과 비교하여 그 한계를 정의함으로써 산업디자인을 위한 소비자 조사 모델의 가이드라인 개발을 목적으로 한다. 제안한 가이드라인에 따라 진행된 실제 구매의사결정과정의 관찰과 분석을 통하여, 이론 및 실제적인 각 국면에서 양자간의 차별가능성을 도출하였다.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.590-596
• /
• 2010

본 연구에서는 디젤대체 연료와 LPG 혼합용 및 도시 가스의 발열량을 높이기 위한 첨가제로 사용할 수 있는 DME 분리공정에 대한 올바른 열역학 모델식의 선정에 대한 해석을 시도하였다. 물과 메탄올 용매 사이의 액상에서의 비이상성을 해석하기 위해서 NRTL 액체 활동도계수 모델식을 사용하였으며, 기상에서 이상기체의 비이상성을 해석하기 위해서 Peng-Robinson 상태방정식을 사용하였다. 한편, Methanol absorber에서 메탄올 수용액 중의 $H_2$, CO, $CO_2$, $H_2$, $CH_4$과 $N_2$ 등과 같은 비응축성 기체의 용해도를 추산하기 위해서 온도와 압력의 함수로 나타낸 Henry parameter를 사용하였다. 사례 연구를 통해서 원료에 대한 용매의 몰 유량비가 3.40일 때 최적이 됨을 알 수 있었다.

• Journal of Communications and Networks
• /
• 제5권2호
• /
• pp.157-166
• /
• 2003

This paper deals with the problem of channel identification for Single Input Multiple Output (SIMO) slow fading channels using clustering algorithms. Due to the intrinsic memory of the discrete-time model of the channel, over short observation periods, the received data vectors of the SIMO model are spread in clusters because of the AWGN noise. Each cluster is practically centered around the ideal channel output labels without noise and the noisy received vectors are distributed according to a multivariate Gaussian distribution. Starting from the Markov SIMO channel model, simultaneous maximum ikelihood estimation of the input vector and the channel coefficients reduce to one of obtaining the values of this pair that minimizes the sum of the Euclidean norms between the received and the estimated output vectors. Viterbi algorithm can be used for this purpose provided the trellis diagram of the Markov model can be labeled with the noiseless channel outputs. The problem of identification of the ideal channel outputs, which is the focus of this paper, is then equivalent to designing a Vector Quantizer (VQ) from a training set corresponding to the observed noisy channel outputs. The Linde-Buzo-Gray (LBG)-type clustering algorithms [1] could be used to obtain the noiseless channel output labels from the noisy received vectors. One problem with the use of such algorithms for blind time-varying channel identification is the codebook initialization. This paper looks at two critical issues with regards to the use of VQ for channel identification. The first has to deal with the applicability of this technique in general; we present theoretical results for the conditions under which the technique may be applicable. The second aims at overcoming the codebook initialization problem by proposing a novel approach which attempts to make the first phase of the channel estimation faster than the classical codebook initialization methods. Sample simulation results are provided confirming the effectiveness of the proposed initialization technique.

• 항공우주시스템공학회지
• /
• 제10권4호
• /
• pp.90-97
• /
• 2016

항공우주연구원은 천리안위성의 임무를 승계하기 위해 2018년과 2019년 발사를 목표로 정지궤도복합위성 2A와 2B를 개발하고 있다. 정지궤도복합위성은 아리안 V 발사체에 의하여 발사되어 전이궤도(Transfer Orbit)에 전입한 후 여러 번의 액체원지점엔진분사를 통하여 표류궤도에 진입한다. 액체원지점엔진의 분사시기, 분사시간, 각 분사간의 간격 등은 위성이 목표하는 표류궤도에 진입할 수 있도록 선정되고 적용된다. 정지궤도복합위성의 경우 표류궤도 진입을 위하여 4회의 액체원지점엔진 분사를 수행할 계획이다. 본 논문에서는 미리 정의된 제한조건을 고려하고 외부 교란력을 고려하여 정지궤도복합위성의 액체원지점엔진 분사계획을 수립하였다. 여기서는 단일계산(Single Shot) 방식과 반복계산에 의한 최적화 기법, 두 가지 접근을 고려하였다. 최적의 해를 얻기 위해 Focusleop이라고 하는 발사초기임무해석 도구를 적용하였다.

• 천문학회보
• /
• 제41권2호
• /
• pp.50.2-50.2
• /
• 2016

Polarization is a rich source of information on the physical properties of astronomical objects. In particular, scattered sunlight by optically thin media (e.g., cometary comae) shows linear polarization of light, which highly depends on the phase angle (an angle between the Sun-Comet-Earth), wavelengths, and physical properties of cometary dust particles such as size, composition, and structures. Here, we present a study of polarimetric properties of non-periodic comet C/2013 US10 (Catalina) in optical and near-infrared wavelength regions obtained from imaging, spectroscopy, and polarimetric observations taken on UT 2015 December 17 - 19 welcoming its (probably) first close approach to the Earth. In this presentation, we want to introduce our progress since the last Korean Astronomical Society meeting (at BEXCO, Busan, 2016 April 14 - 15) especially in terms of spatial variations of degree of linear polarization (DOLP) and its possible scenarios to explain the correlations with other observational results. In particular, we found that there is strong anti-correlation between the gas/dust flux ratio and DOLP at the cometocentric distance of $(2-5){\times}104 km$. Besides, within 10 arcseconds in radii (corresponding to inner coma region of 104 km from the center), the inverse relationship of these two parameters does not hold anymore. We conjecture that the rapid outward increase of DOLP can be supported by either the sublimation/evaporation of icy volatiles, disaggregation of cometary dust particles ejected from the nucleus, and/or difference of dominant dust particle sizes. From our results, we can conclude that comet C/2013 US10 (Catalina) corroborates rather indefinite traditional classification of poalrimetric classes of comets, and provides good opportunity to study less processed material which probably cherishes its memory at the formation epoch of the Solar System.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.705-712
• /
• 2000

The fluid generally flows through fractures in crystalline rocks where most of underground storage facilities are constructed because of their low hydraulic conductivities. The fractured rock is better to be conceptualized with a discrete fracture concept, rather continuum approach. In the aspect of fluid flow in underground, the simultaneous flow of groundwater and gas should be considered in the cases of generation and leakage of gas in nuclear waste disposal facilities, air sparging process and soil vapor extraction for eliminating contaminants in soil or rock pore, and pneumatic fracturing for the improvement of permeability of rock mass. For the purpose of appropriate analysis of groundwater-gas flow, this study presents an unsteady-state multi-phase FEM fracture network simulator. Numerical simulation has been also conducted to investigate the hydraulic head distribution and air tightness around Ulsan LPG storage cavern. The recorded hydraulic head at the observation well Y was -5 to -10 m. From the results obtained by the developed model, it shows that the discrete fracture model yielded hydraulic head of -10 m, whereas great discrepancy with the field data was observed in the case of equivalent continuum modeling. The air tightness of individual fractures around cavern was examined according to two different operating pressures and as a result, only several numbers of fractures neighboring the cavern did not satisfy the criteria of air tightness at 882 kPa of cavern pressure. In the meantime, when operating pressure is 710.5 kPa, the most areas did not satisfy air tightness criteria. Finally, in the case of gas leaking from cavern to the surrounding rocks, the resulted hydraulic head and flowing pattern was changed and, therefore, gas was leaked out from the cavern ceiling and groundwater was flowed into the cavern through the walls.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.425-425
• /
• 2008

Bismuth-antimony-telluride based thermoelectric thin film materials were prepared by metal organic vapor phase deposition using trimethylbismuth, triethylantimony and diisopropyltelluride as metal organic sources. A planar type thermoelectric device has been fabricated using p-type $Bi_{0.4}Sb_{1.6}Te_3$ and n-type $Bi_2Te_3$ thin films. Firstly, the p-type thermoelectric element was patterned after growth of $4{\mu}m$ thickness of $Bi_{0.4}Sb_{1.6}Te_3$ layer. Again n-type $Bi_2Te_3$ film was grown onto the patterned p-type thermoelectric film and n-type strips are formed by using selective chemical etchant for $Bi_2Te_3$. The top electrical connector was formed by thermally deposited metal film. The generator consists of 20 pairs of p- and n-type legs. We demonstrate complex structures of different conduction types of thermoelectric element on same substrate by two separate runs of MOCVD with etch-stop layer and selective etchant for n-type thermoelectric material. Device performance was evaluated on a number of thermoelectric devices. To demonstrate power generation, one side of the device was heated by heating block and the voltage output was measured. The highest estimated power of 1.3mW is obtained at the temperature difference of 45K. We provide a promising approach for fabricating thin film thermoelectric generators by using MOCVD grown thermoelectric materials which can employ nanostructures for high thermoelectric properties.

• 한국자원식물학회지
• /
• 제22권3호
• /
• pp.227-235
• /
• 2009

Single seeds of common buckwheat cultivar Suwon No. 1 when subjected to SDS-PAGE revealed very high polymorphism. High variation existed for protein or protein subunits with molecular weight 54-47kDa, 45-25kDa and 16-11kDa. The electrophoregram showed variation for globulin as well as other protein fractions. About 300 proteins were separated by two-dimensional electrophoresis in common buckwheat (Fagopyrum esculentum Moench.) seed. Seed maturation is a dynamic and temporally regulated phase of seed development that determines the composition of storage proteins reserves in mature seeds. Buckwheat seeds from 5, 10, 15, 20, and 25 days after pollination and matured stage were used for the analysis. This led to the establishment of high-resolution proteome reference maps, expression profiles of 48 spots. It was identified 48 proteins from MALDI-TOF/MS analysis of wild buckwheat seed storage proteins. The 48 proteins were found identical or similar to those of proteins reported in buckwheat and other plants; it is belonging to 9 major functional categories including seed storage proteins, stress/defense response, protein synthesis, photosynthesis, allergy proteins, amino acid, enzyme, metabolism, and miscellaneous. It appears that the major allergenic storage protein separated played the important role in buckwheat breeding and biochemical characterization.

• 한국수소및신에너지학회논문집
• /
• 제21권1호
• /
• pp.1-11
• /
• 2010

Current distribution measurement technique based on a segmented bipolar plate (BP) has been widely adopted to visualize the distribution of current density in a polymer electrolyte membrane. However, a concern is raised how closely the current density of a segmented BP can approach that of a corresponding non-segmented membrane. Therefore, in this paper, the accuracy of the measurement technique is numerically evaluated by applying a three-dimensional, two-phase fuel cell model to a $100\;cm^2$ area fuel cell geometry in which segmented BPs and non-segmented membrane are combined together. The simulation results reveal that the errors between the current densities of the segmented BPs and non-segmented membrane indeed exist, predicting the maximum relative error of 33% near the U-turn regions of the flow-field. The numerical study further illustrates that the erroneous result originates from the BPs segmented non-symmetrically based on the flow channels that allows some currents bypassing flow channels to flow into its neighboring segment. Finally, this paper suggests the optimal way for bipolar plate segmentation that can minimize the deviation of current measured in a segmented BP from that of a corresponding membrane region.

• 한국정보과학회논문지:정보통신
• /
• 제33권2호
• /
• pp.165-174
• /
• 2006

매우 제한된 연산능력과 메모리 그리고 소용량 배터리를 가진 센서 노드로 구성된 센서 네트워크에서 플러딩이나 기존에 제안된 애드혹 라우팅 프로토콜을 적용하여 데이타를 전달하는 것은 현실적인 방안이 되지 못한다. 본 논문에서 우리는 ELF(Energy-efficient Localized Flooding)라고 하는 에너지 효율적인 데이타 전달 프로토콜을 제안하고자 한다. ELF 프로토콜은 소스 센서 노드와 이동성을 갖는 싱크 노드 간의 데이타 전달에 있어서 tracking zone이전 까지는 유니캐스트를 통해서 데이타 메시지가 포워딩되며, tracking tone내에서는 지역적인 플러딩을 통해서 데이타가 전달되도록 하여 유니캐스트와 플러딩의 장점을 적절하게 결합하고 있다. 시뮬레이션을 결과에 따르면, ELF는 매우 높은 data delivery ratio를 유지하면서도 average energy consumption 및 average delay는 낮은 특성을 보임으로써 센서 네트워크의 데이타 전달 방법으로써 매우 효과적임을 확인할 수 있다.