• Journal of electromagnetic engineering and science
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2016

In this paper, based on the mode analysis of four-conductor lines, the extended mixed-mode chain-parameters and S-parameters of four-conductor lines are estimated using current division factors. The extended mixed-mode chain-parameters of cascaded four-conductor lines are then obtained with mode conversion. And, the extended mixed-mode S-parameters of cascaded four-conductor lines can be predicted from the transformation of the extended chain-parameters. Compared to the extended mixed-mode S-parameters of four-conductor lines, the cross-mode S-parameters are induced in the extended mixed-mode S-parameters of cascaded four-conductor lines, due to the imbalanced current division factors of cascaded two sections. The generated cross-mode S-parameters make the equivalent different- and common-mode conductors not independent from each other again. In addition, a new mode conversion, which applies the imbalanced current division factors, between the extended mixed-mode S-parameters and standard S-parameters is also proposed in this paper. Finally, the validity of the proposed extended mixed-mode S-parameters and mode conversion is confirmed by a comparison of the simulated and estimated results of shielded cable.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.04a
• /
• pp.247-256
• /
• 1997

A nonlinear mathematical model of longitudinal combustion instability appropriate for ramjets and augmentors was developed based on modal analysis. The model was limited to a two-mode formulation. The associated differential equations were solved both analytically and numerically and used to perform parametric studies.

• Journal of Biomedical Engineering Research
• /
• v.2 no.2
• /
• pp.141-144
• /
• 1981

This paper descirbes about effects of refraction of ultrasonic beam on B-mode tomogram. Both compution based on Snell's law and the experiments performed using B-mode scanner and schlieren optical method are discussed on a circular phantom immersed in water. In these results, if the discrepancy of sound velocity is more than 0. 6%, the distortion of the B-mode image becomes conspicuous and a target beyound the phantom may disappear or displayed as two targets depending on the velocity of the phantom.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.348-348
• /
• 2000

In this paper, we present a fuzzy moving sliding mode control for two-degrree-of-freedom robotic manipulator. 17he sliding surface parameters are designed by fuzzy inference. The proposed sliding mode control makes the error always remain on the surface from beginning and therefore, the system is insensitive to system uncertaintics and external disturbances. Simulation results show the effectiveness of proposed scheme.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.145-151
• /
• 2007

In this paper, a BPF with a dual mode folded ring resonator is presented. The dual mode ring resonator is also exactly analyzed by using Y-parameter method, in which the difference in admittance of two lines make the ring resonator work as a dual mode resonator. The proposed BPF has an advantage of small size compared to conventional one with dual mode ring resonator.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.91-100
• /
• 1995

This paper represents the lateral first-order mode characteristics for the semiconductor laser diodes using a two-dimensional numerical simulator. In order to analyze the lateral first-order mode characteristics, Helmholtz wave equation is solved twice for the lateral fundamental and the first-order mode considering the mode gain, total losses, and the recombination rate due to the stimulated emission radiation for the each mode independantly. Through this procedure, we find that the lateral first-order mode was easily guided as increasing the stripe width for the index-guiding structures, and that the lateral first-order mode seems to be dominated in the distribution of total light intensity when its output power reaches nearly half of that of the lateral fundamental mode. This results may be used to design the device structure which guides only the lateral fundamental mode.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.217-221
• /
• 2007

In this study, forced vibrations analysis was performed for main wing of small scale WIG vehicle which is equipped two-stroke pusher type propeller engine, in terms of structural. for the frequency response analysis, excitations were assumed by H-mode(Horizontal mode), X-mode(Twisted mode) which is main vibration mode of engine, and for the transient response analysis, excitations were assumed by L-mode(Longitudinal mode) with propeller thrust which is occurred when it revolution.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.2
• /
• pp.65-72
• /
• 2004

Switching power supply systems are widely used in many industrial fields. Power factor correction (PFC) circuits have a tendency to be applied in new power supply designs. The input active power factor correction (APFC) circuits can be implemented in either the two-stage approach or the single-stage approach. The two-stage approach can be classified into boost type PFC circuit and dc/dc converter. The power factor correction circuit with a boost converter used as an input power source is studied in this paper. In a boost power factor correction circuit there are two feedback control loops, which are a current feedback loop and a voltage feedback loop. In this paper, the regulation performance of output voltage and compensator to improve the transient response presented at the continuous conduction mode (CCM) of the boost PFC circuit is analyzed. The validity of designed boost PFC circuit is confirmed by MATLAB simulation and experimental results.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1105-1108
• /
• 1999

In this paper, we propose a new addressing mode, which can be used for programmable image processor to perform image- processing algorithms effectively. Conventional addressing modes are suitable for one-dimensional data processing such as voice, but the proposed addressing mode consider two-dimensional characteristics of image data. The proposed instruction for two-dimensional addressing requires two operands to specify a pixel and doesn't require any change of memory architecture. Combining several instructions to load a pixel-data from an external memory to a register, the proposed instruction reduces code size so that satisfy hish performance and low power requirements of image processor. In addition, it uses inherent two-dimensional characteristics of image data and offers user-friendly instruction to assembler programmer.

• Journal of Power System Engineering
• /
• v.4 no.4
• /
• pp.70-77
• /
• 2000

On the dynamic behavior of a simple beam the influences of the velocities and distance of two moving masses have been studied by numerical method. The instant amplitude of a simple beam is calculated and analyzed for each position of the moving masses represented by the time functions. As increasing the velocties of two moving masses on the simple beam, the amplitude of the transverse vibration of the simple beam is decreased and the frequency of the transverse vibration of the simple beam is increased. As the distance between two moving masses increase, the transverse displacement of the simple beam is decrease. The simple beam is very stable in second mode at $\bar{a}=0.5$ and in third mode at $\bar{a}=0.3$.