• Speech Sciences
• /
• v.14 no.3
• /
• pp.77-89
• /
• 2007

This paper examined the intonation contours of English sentences produced by the Korean students. Thirty students participated in the speaking tasks made up of three parts: an oral interview, picture description and a conversational text reading. Their pronunciations in the parts were recorded on a minidisk. Then, two native instructors evaluated their proficiency level focusing on general intelligibility and suprasegmental aspects of the speech. Based on the results of evaluation they were divided into two groups: high and low proficiency groups. The pitch contours of three sentences produced by both the Korean students and a native speaker were compared to find any similarities and differences in the students' intonation patterns using Praat. Results showed that there was a moderate correlation in the proficiency scores of the students by the two native speakers. Secondly, students who earned high scores in the proficiency level matched better the native model. Thirdly, the high group students knew more on the pitch contour and tried to carefully realize them while fewer students in the low group answered positively on the questionnaire. In conclusion, English learners need to know the proper intonation patterns and to practice them consciously and sufficiently to realize correct intonation contours. Further studies would be desirable on the students' pronunciation focused on discourse structure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.898-901
• /
• 2005

We propose a novel pixel structure using bootstrapped voltage programming for amorphoussilicon TFT backplane of AM-OLED (Active Matrix-Organic Light Emitting Diode) displays. The proposed structure is composed of two TFTs and one capacitor. It operates at low drive voltage ($0{\sim}5V$) which can reduce power consumption comparing with the conventional pixel circuit structure using same OLED material. Also, it can easily control dark level and use commercial mobile LCD ICs. In this paper, we describe the operating principle and the characteristics of the proposed pixel structure and verify the performance by SPICE simulation comparing with the conventional pixel structure.

• Journal of the Korean Statistical Society
• /
• v.34 no.2
• /
• pp.141-151
• /
• 2005

Under the assumption that the three-level factors are quantitative, the linear effects are taken more attention than the quadratic effects of the interaction terms. Webb (1971) presented some small incomplete factorial designs that are mixed two- and three-level designs with 20 or fewer runs. The designs provided the estimating linear-by-linear components of interactions between the three-level factors; moreover, they could also offer estimation of interactions that interest the experiments. Webb used ad hoc methods to find these plans; hence, there was still no unified structure to those experiments. In this paper, we develop the methods to construct the $2^{n}3^3$ and $2^{1}3^3$ designs. The designs constructed by these methods not only supply orthogonal estimates of all the main effects but also permit estimation of all the two-factor interactions not involving the quadratic effects. Furthermore, the designs we find are nearly orthogonal.

• 전자공학회논문지 IE
• /
• v.45 no.3
• /
• pp.36-41
• /
• 2008

By considering decoupling between loops as a kind of measurable disturbance, a steady-state decoupling method based on feedforward compensation is proposed for a three-tank liquid level system often encountered in practical process control. In addition, the three-tank liquid level system's dynamic model with structure of two-input and two-output is presented according to its working principle. Finally simulation experiments given in C++Builder language demonstrate the effectiveness of the proposed method.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.89-95
• /
• 2006

This study has numerically modelled the combustion processes of the turbulent swirling premixed lifted flames in the low-swirl burner (LSB). In these turbulent swirling premixed flames, the four tangentially-injected air jets induce the turbulent swirling flow which plays the crucial role to stabilize the turbulent lifted flame. In the present approach, the turbulence-chemistry interaction is represented by the level-set based flamelet model. Two-dimensional and three-dimensional computations are made for the various swirl numbers and nozzle length. In terms of the centerline velocity profiles and flame liftoff heights, numerical results are compared with experimental data The three-dimensional approach yields the much better conformity with agreements with measurements without any analytic assumptions on the inlet swirl profiles, compared to the two-dimensional approach. Numerical clearly results indicate that the present level-set based flamelet approach has realistically simulated the structure and stabilization mechanism of the turbulent swirling stoichiometric and lean-premixed lifted flames in the low-swirl burner.

• Steel and Composite Structures
• /
• v.39 no.5
• /
• pp.645-664
• /
• 2021

There is a growing need of seismic retrofit of existing non-seismically designed structures in Korea after the 2016 Gyeongju and 2017 Pohang earthquakes, especially school buildings which experienced extensive damage during those two earthquakes. To this end, a steel multi-slit damper (MSD) was developed in this research which can be installed inside of partition walls of school buildings. Full-scale two-story RC frames were tested with and without the proposed dampers. The frames had structural details similar to school buildings constructed in the 1980s in Korea. The details of the experiments were described in detail, and the test results were validated using the analysis model. The developed seismic retrofit strategy was applied to a case study school building structure, and its seismic performance was evaluated before and after retrofit using the MSD. The results show that the developed retrofit strategy can improve the seismic performance of the structure to satisfy a given target performance level.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.12
• /
• pp.100-107
• /
• 1994

This article describes the hardware design scheme of Hamming MAXNET algorithm which is appropriate for binary pattern classification with minimum HD measurement between stimulus vector and storage vector. Circuit integration is profitable to Hamming MAXNET because the structure of hamming network have a few connection nodes over the similar neuro-algorithms. Designed hardware is the two-layered structure composed of hamming network and MAXNET which enable the characteristics of low power consumption and fast operation with biline volgate sensing scheme. Proposed Hamming MAXNET hardware was designed as quantize-level converter for simulation, resulting in the expected binary pattern convergence property.

• Earthquakes and Structures
• /
• v.10 no.4
• /
• pp.867-891
• /
• 2016

This paper addresses numerically the behavior of steel structures under Fire-after-Earthquake (FAE) loading. The study is focused on a four-storey library building and takes into account the damage that is induced in structural members due to earthquake. The basic objective is the assessment of both the fire-behavior and the fire-resistance of the structure in the case where the structure is damaged due to earthquake. The combined FAE scenarios involve two different stages: during the first stage, the structure is subjected to the ground motion record, while in the second stage the fire occurs. Different time-acceleration records are examined, each scaled to multiple levels of the Peak Ground Acceleration (PGA) in order to represent more severe earthquakes with lower probability of occurrence. In order to study in a systematic manner the behavior of the structure for the various FAE scenarios, a two-dimensional beam finite element model is developed, using the non-linear finite element analysis code MSC-MARC. The fire resistance of the structure is determined using rotational limits based on the ductility of structural members that are subjected to fire. These limits are temperature dependent and take into account the level of the structural damage at the end of the earthquake and the effect of geometric initial imperfections of structural members.

• Structural Engineering and Mechanics
• /
• v.77 no.4
• /
• pp.481-493
• /
• 2021

Low rise masonry structures are relatively inexpensive and easier to construct compared to other types of structures such as steel and reinforced concrete buildings. However, masonry structures are relatively heavier and less ductile and more vulnerable to damages in earthquakes. In this research, a new innovative low-cost seismic isolator using steel rings (SISR) is employed to reduce the seismic vulnerability of masonry structures. FEA of a masonry structure, made of concrete blocks is used to evaluate the effect of the proposed SISR on the seismic response of the structure. Two systems, fixed base and isolated from the base with the proposed SISRs, are considered. Micro-element approach and ABAQUS software are used for structural modeling. The nonlinear structural parameters of the SISRs, extracted from a recent experimental study by the authors, are used in numerical modeling. The masonry structure is studied in two separate modes, fixed base and isolated base with the proposed SISRs, under Erzincan and Imperial Valley-06 earthquakes. The accelerated response at the roof level, as well as the deformation in the masonry walls, are the parameters to assess the effect of the proposed SISRs. The results show a highly improved performance of the masonry structure with the SISRs.

• Computers and Concrete
• /
• v.31 no.5
• /
• pp.385-394
• /
• 2023

Displacement is an important element for evaluating the stability and failure mechanism of hydraulic structures. Digital image correlation (DIC) is a useful technique to measure a three-dimensional displacement field using two cameras without any contact with test material. The objective of this study is to evaluate the behavior of stacked geotextile tubes using the DIC technique. Geotextile tubes are stacked to build a small-scale temporary dam model to exclude water from a specific area. The horizontal and vertical displacements of four stacked geotextile tubes are monitored using a dual camera system according to the upstream water level. The geotextile tubes are prepared with two different fill materials. For each dam model, the interface layers between upper and lower geotextile tubes are either unreinforced or reinforced with a cementitious binder. The displacement of stacked geotextile tubes is measured to analyze the behavior of geotextile tubes. Experimental results show that as upstream water level increases, horizontal and vertical displacements at each layer of geotextile tubes initially increase with water level, and then remain almost constant until the subsequent water level. The displacement of stacked geotextile tubes depends on the type of fill material and interfacial reinforcement with a cementitious binder. Thus, the proposed DIC technique can be effectively used to evaluate the behavior of a hydraulic structure, which consists of geotextile tubes.